LX40-20S

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height LX Series ■Overview Hirose’s next generation of interface connectors further reduces the mounting height of the receptacle by approximately 30% (compared with the 3200 Series receptacle). High durability, secure mating, electrostatic protection and ease of operation guarantees reliable and consistent performance in demanding consumer applications. Lower Profile 2.9 ■Features 1. Low profile on the PCB When mounted on the PCB surface the receptacle height is 2.0 mm. Existing 3200 Series LX Series 2. Strong Construction Use of metal shell and advanced plastics guarantees that fully mated connectors will withstand 30 N max. force applied on the plug in any direction. Strong Construction 3. High durability 5000 mating/un-mating cycles without any degradation of electrical or mechanical performance. Tactile sensation when mating confirms complete mated condition and assures secure retention of the plug. 30N 4. Sequenced contact mating The protection of the circuit is assured by having the 2 contact at each end of the receptacle protrude forward by 0.5 mm, with electrical wipe of 1.45 mm. Location of the circuit protection contacts can be changed as required. Remaining contacts electrical wipe is 0.95 mm. 30N 5. Incorrect Insertion Prevention Connectors will not be damaged when angled or reverse plug insertion is attempted. Incorrect insertion prevention 6. Safety plug release Plug will release when an excessive pull force is applied to the cable. 7. RoHS Compliant All components and materials comply with the requirements of the EU Directive 2002/95/EC. Angled insertion Reversed insertion 2008.5w 2 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products haveUltra Low-profile Interface Connectors with 2.0 mmstatus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. LX Series● been discontinued, or will be discontinued soon. Please check the products Mounting Height ■Product specifications Current rating Ratings Voltage rating Characteristic 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage 70mø max. 1000 Mø min. (dry) 10 Mø min. (high humidity) No flashover or insulation breakdown. 0.5A (1A max. can be carried via 2 random contacts) 50V AC Specification 100mA DC 100V DC 250V AC / one minute With corresponding connector. 5, 000 times Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles, 3 axis. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, acceleration of 98 m/s2, 2 hours, 3 axis. Temperature: – 55ç ➝ +5ç to +35ç ➝ +85ç ➝ +5ç to +35ç Time : 30 ➝5 ➝ 30 ➝ 5 (Minutes) Operating temperature range : –40ç to +70ç Storage temperature range : –55ç to +85ç (Note) Conditions 4.Mating/un-mating forces Mating: 10N max., un-mating: 4N min. 5. Durability (mating/un-mating) 6. Shock Amount of change of contact resistance: 20mø max. No electrical discontinuity of 1μ sec. Max. Contact resistance: 20mø max. Contact resistance: 20mø max. Insulation resistance: 10Mø min. Contact resistance: 20mø max. Insulation resistance: 10Mø min. No heavy corrosions 7. Vibration 8. Temperature cycle 9. Salt spray 5% water solution at 35°C for 48 hours Note : Includes temperature rise caused by current flow. ■Materials / Finish ●Receptacles Component Insulator Contacts Shell Material Synthetic resin Copper alloy Stainless steel Finish/Color Black Contact area: Gold plated Mounting area: Gold flash plated Soldering area: Gold flash plated Remarks UL94V-0 --------------------------- ●Plugs Component Insulator Contacts Metal shield Covers Strain relief clamp Self tapping screws Material Synthetic resin Copper alloy Stainless steel Synthetic resin Copper alloy Steel Finish/Color Black Contact area: Gold plated Termination area: Gold flash plated -------------Black -------------Trivalent black chromate Remarks UL94V-0 --------------------------UL94V-0 -------------Screw size: M2 ■Ordering information ●Receptacles 1 2 Series number Termination type 40 : Solder type 60 : Right angle SMT : LX LX 60 - 16 S 1 2 3 4 ●Plugs 3 4 Number of contacts : 12, 16, 20 Contact type P : Male contact (Plug) S : Female contact (Receptacle) LX 40 - 16 P 1 2 3 4 ●Bushing 5 Bushing : Dia. 4.0mm cable BS(4.0) BS(4.5) BS(5.0) LX 40 - 16 BS(4.5) 1 2 3 5 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height LX status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■Receptacles ●12 pos. (5.5) P=0.5 2.55 No.12 No.1 2 6.5 R0 4 10.6 Ø1 3.6 .5 BRecommended PCB mounting pattern Part number LX60-12S LX60-16S LX60-20S CL No. CL245-0018-3 CL245-0001-0 Reel packaging (2000 pieces/reel) YES 3.8 2.8 1.5 5.7 PCB edge 1.9 4 6.5 7.8 1.9 Land area No conductive traces in this area Packaging RoHS 2Ø1 .1 Ho le (5.5) P=0.5 0.35 1.2 2.55 No.1 2 6.5 0.3 .5 R0 CL245-0016-8 ●16 pos. (7.5) P=0.5 2.55 ●20 pos. (9.5) P=0.5 No.16 No.1 2 6.5 .5 R0 0.8 Ø1 3.6 No.20 0.8 5 12.6 6.7 14.6 0.8 Ø1 3.6 BRecommended PCB mounting pattern (7.5) 1.2 BRecommended PCB mounting pattern 2- (9.5) Ho le 1.1 Ho le 5.7 1.2 7 10.5 11.8 1.9 Land area 0.3 5.7 2-Ø P=0.5 0.35 Ø1 .1 P=0.5 0.35 3.8 2.8 1.5 0.3 PCB edge 1.9 5 8.5 9.8 3.8 2.8 1.5 PCB edge 1.9 No conductive traces in this area 1.9 Land area No conductive traces in this area 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products haveUltra Low-profile Interface Connectors with 2.0 mmstatus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. LX Series● been discontinued, or will be discontinued soon. Please check the products Mounting Height ■Plugs ●12 pos. Ø5 .9 (R 14.8 8 3.2 ) 21.4 (R Part number LX40-12P LX40-16P LX40-20P CL No. CL245-0019-6 CL245-0002-3 CL245-0017-0 Packaging RoHS No.1 No.12 1 YES ●16 pos. .4 Ø6 ●20 pos. Ø6 .9 (R 3. 16.8 8) 8 (R 3. 18.8 6.2 * Cable with overmolded bushing shown for reference only. Not supplied. 5.1 4 1. ) 8.4 8) 21.4 5.1 6.2 21.4 5.5 (R 1. 4) (R No.1 No.16 No.1 No.20 ■Bushing Part number LX40-12BS(4.0) LX40-16BS(4.5) LX40-20BS(5.0) CL No. CL245-0020-5 CL245-0021-8 CL245-0022-0 6.2 4 1. ) Packaging RoHS 100 pieces / bag YES 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height LX status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BReceptacle Packaging Specifications ●Embossed carrier tape dimensions Unreeling directions C 1.75 B 4 A 4 .5 Ø1 2 (mm) Part number LX60-12S LX60-16S LX60-20S A B C 24 11.5 12 ●Reel dimensions Unreeling directions Ø380 Ø80 D (Inside dimension) E (Outside dimension) (mm) Part number LX60-12S LX60-16S LX60-20S D E 25.5 29.5 30 Ø1 3 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products haveUltra Low-profile Interface Connectors with 2.0 mmstatus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. LX Series● been discontinued, or will be discontinued soon. Please check the products Mounting Height ■Receptacles Recommended Temperature Profile (ç) 0 PEAK:250 +5 ç 250 HRS test conditions Solder composition Paste, 96.5%Sn/3.0%Ag/0.5%Cu 230ç min. 200 180ç 150 150ç 90±30s 90±10s Test board Glass epoxy 35mm x 35mm x 0.8mm thick The temperature profiles are based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Contact your solder paste and equipment manufacture for specific recommendations. 100 50 BApplicable Plug Cable (mm) Part number LX40-12P LX40-16P LX40-20P Cable diameter Ø4 max. Ø4.5 max. Ø5 max. Ø0.6 mm max. (AWG 30 to 32 or equivalent) Wire size Note 1: Applicable cable sizes are guidelines. (There may be slight differences depending on the cable outer insulation) Note 2: Cables must be attached using single piece overmolded bushings on the cable. Note 3: Please refer to applicable Cable Termination Procedures Manual for correct plug assembly and cable termination. Note 4: Contact HRS for cable assemblies. BMated Condition Dimensions Receptacle 2 1.4 Plug 2 (mm) 6 0.5