MCN51-8P2-DS

厂商：
HIROSE
封装：
描述：
MCN51-8P2-DS - High Current, High Density, Power Connectors - Hirose Electric

数据手册：

下载MCN51-8P2-DS.pdf

立即购买

详情介绍
数据手册
价格&库存

MCN51-8P2-DS 数据手册

NEW High Current, High Density, Power Connectors MCN51 Series sFeatures 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. View of the Compliant Press-Fit section application 2. Hirose's Unique Compliant Press-fit connection to the PCB (patents pending) The compliant section is designed to provide reliable and damage free connection with the Plated-Through-hole, reducing stresses to the PCB. 3. Multiple Contacts in a Variety of Configurations offered with 8, 16 and 30 contacts in vertical, right angle, solder and compliant press-fit terminations. Compliant section 4. UL Recognized, CSA Certified UL File No. E52653 CSA File No. LR95109 sApplications Telecom, LAN and Data storage equipment, high-end servers, and a wide variety of power supply devices. PCB Min.PCB thickness = 3.2 mm 2002.11 1 sProduct Specifications Current rating 27 A max. (Note 1) Ratings Voltage rating 600 V AC Storage temperature range Operating temperature range -10˚C to +60˚C (Note 3) -55˚C to +125˚C (Note 2) Operating humidity level Storage humidity range Relative humidity 95% max. 40% to +70% (provided there is no condensation) Conditions 500 V DC 2000V AC applied /one minute 25 A DC Frequency of 10 to 2,000 Hz, overall amplitude of 1.5 mm Or, acceleration of 196 m/s2 for 2 hours in each of 3 directions. Expose to a temperature of +125˚C for 96 hours. Expose to a temperature of -55˚C for 96 hours. (-55˚C: 30 minutes => 15 to 30˚C: 5 minutes max. => 125˚C: 30 minutes => 15 to 30˚C: 5 minutes max.) 20 cycles 56 days at temperature of 40ç±2ç and humidity of 90% to 95% 1500 hours at temperature of 85ç 1000 cycles Leave for 96 hours in an atmosphere of 25 ppm concentration sulfur dioxide gas. Item 11.Insulation resistance 12.Withstanding voltage 13.Contact resistance 14.Vibration 15.Heat resistance 16.Cold resistance 17.Temperature cycle Specification 5000M ohms min. No flashover or insulation breakdown. 3m ohms max. (initial value) No electrical discontinuity of 1 ms or more No damage, cracks, or parts dislocation. Contact resistance: 7m ohms max. Contact resistance: 7m ohms max. Contact resistance: 7m ohms max. Insulation resistance: 5000M ohms min. No damage, cracks, or parts dislocation. Contact resistance: 7m ohms max. Insulation resistance: 5000 M ohms min. Contact resistance: 7m ohms max. Contact resistance: 7m ohms max. Contact resistance: 7m ohms max. 18.Humidity resistance 19.High temperature exposure 10.Operating life 11.Sulfur dioxide gas Note1: Refer to "Current-Temperature De-rating Curve" (IEC 512-3, Test 5b) and "Temperature Rise Curve" (IEC 512-3 Test 5a) on Page 3. Note2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. sMaterials Product Pin headers Part Insulator Contacts Insulator Material PBT Copper alloy PBT Copper alloy Finish Black Gold plating Black Gold plating Remarks UL94V-0 ---------UL94V-0 ---------- Receptacles Contacts sOrdering Information MCN 51 - 30 P 3 - DS 1 1 Series name : MCN51 : 8, 16, 30 2 3 4 5 4 Rows 2 : 2 rows 3 : 3 rows 2 Number of contacts 3 Connector type P : Pin header S : Socket Receptacle 5 Contact type PFA : Press-fit (through-hole diameter 2.03 mm) DS : Right-angle through-hole type 2 BCurrent - Temperature De-rating Curve q(IEC 512-3, Test 5b) MCN51 Series De-rating Curve (Base Line) Current Flow (A) Ambient Temperature (˚C) Measurements were made with 12 AWG wire connected in series to all contacts. BTemperature Rise Curve q(IEC 512-3, Test 5a) MCN51 Series Temperature Rise Curve Current Flow (A) Temperature Rise (˚C) Measurements were made with 12 AWG wire connected in series to all contacts. 3 sReceptacle: Straight, Press-Fit q2-row type PCB mounting pattern -Ø 2. D 5 5±0.05 15.39 A B±0.05 5±0.05 03 B 5 2 -(Ø 2.5 15.24 PBT 6.35 5.84 C Ø1.93 Copper plating thickness : 70 ± 10 µm Solder plating thickness : 5 to10 µm Board thickness : 3.2 mm min. Fasten to the board being sure to use (American type) #2 tapping screws. Recommended Through-Hole Diameter Finished hole : 2.03 dia. ± 0.05 mm Drill diameter : 2.185 dia. ± 0.025 mm A B C 27.43 47.45 No.of Contacts(D) 8 16 Part Number MCN51-8S2-PFA MCN51-16S2-PFA CL No. 589-0200-6 589-0199-9 33.63 53.64 15 35 q3-row type PCB mounting pattern 10 ±0.05 5 ±0.05 63.65 45 5 5 A 5 ± 0. C±0.1 4) -Ø 30 2- 10 ±0.05 20.37 10 PBT 5 ±0.05 57.45 ±0.1 15.24 6.35 5.84 57.45 Ø1.93 Copper plating thickness : 70 ± 10 µm Solder plating thickness : 5 to10 µm Board thickness : 3.2 mm min. Fasten to the board being sure to use (American type) #2 tapping screws. Recommended Through-Hole Diameter Finished hole : 2.03 dia. ± 0.05 mm Drill diameter : 2.185 dia. ± 0.025 mm CL No. 589-0196-0 No. of Contacts 30 Part Number MCN51-30S3-PFA 4 5 (Ø 2. 54 45 ±0.1 5 ±0.05 2. 03 ) ±0 .0 10 5 30 20 9 05 A 8 16 29 19 8 7 28 18 15 7 6 27 17 14 6 5 26 16 13 25 15 5 12 4 24 14 4 11 3 23 13 3 10 22 12 2 2 21 11 9 1 1 sPin Header: Right-Angle Through-hole q2-row type PCB mounting pattern 33.63 Ø2 .0 2- 3 Ø2 ±0 27.43 .54 .05 15 ±0.115 ±0.1 5 ±0.055 ±0.05 2- 26.82 15.24 7.87 8- 3 (Ø .1 2 ) 5 ±0.05 5 ±0.05 27.43 ±0.1 15 5 2.49 15.39 PBT 1 2 6 3 7 4 8 A 5 5 Part Number MCN51-8P2-DS CL No. 589-0202-1 3.7 5 No. of Contacts 8 q3-row type PCB mounting pattern 63.65 57.45 3 4 2.5 2-Ø 7.87 45 ±0.1 5 ±0.05 26.82 10 ±0.05 5 ±0.05 45 5 20.37 10 5 1 11 21 2 12 22 3 13 23 4 14 24 5 15 25 6 16 26 7 17 27 8 18 28 9 19 29 10 PBT 20 30 2.49 A 3.71 5 · 5 Part Number MCN51-30P3-DS CL No. 589-0195-8 No. of Contacts 30 3 10 ±0.05 5 ±0.05 57.45 ±0.2 1.02 ±0.1 15.24 3 2- 0- Ø (Ø 2 3. .03 12 ±0 ) .0 5 1.02 ±0.1 5 sPin Header: Straight, Press-Fit q2-row type PCB mounting pattern 53.64 35 5 ±0.05 47.45 ±0.1 35 ±0.05 5 ±0.05 0. 3± 05 5 15.39 1 2 10 3 11 4 12 5 13 6 14 7 15 8 16 PBT 16 Ø2 .0 2 2. -(Ø ) 54 5 9 Ａ 15.24 7.87 6.35 5.84 47.45 Ø1.93 Copper plating thickness : 70 ± 10 µm Solder plating thickness : 5 to10 µm Board thickness : 3.2 mm min. Fasten to the board being sure to use (American type) #2 tapping screws. Recommended Through-Hole Diameter Finished hole : 2.03 dia. ± 0.05 mm Drill diameter : 2.185 dia. ± 0.025 mm CL No. 589-0201-9 No. of Contacts 16 Part Number MCN51-16P2-PFA 6 5

下载 PDF

MCN51-8P2-DS

### 物料型号 - MCN51-8S2-PFA - CL No.: 589-0200-6 - A: 33.63 - B: 15 - C: 27.43 - No. of Contacts: 8 - MCN51-16S2-PFA - CL No.: 589-0199-9 - A: 53.64 - B: 35 - C: 47.45 - No. of Contacts: 16 - MCN51-30S3-PFA - CL No.: 589-0196-0 - No. of Contacts: 30 - MCN51-8P2-DS - CL No.: 589-0202-1 - No. of Contacts: 8 - MCN51-30P3-DS - CL No.: 589-0195-8 - No. of Contacts: 30 - MCN51-16P2-PFA - CL No.: 589-0201-9 - No. of Contacts: 16

### 器件简介 MCN51系列连接器是高电流、高密度、电源连接器，适用于多种配置，包括垂直、直角、焊接和压接式终止。这些连接器提供8、16和30个接触点的多种配置。

### 引脚分配 - 2行类型：2行2列和3行3列 - 接触类型：P（针头）、S（插座）、PFA（压接式）

### 参数特性 - 电流额定值：最大27A（注1） - 操作温度范围：-55°C至+125°C（注2） - 存储温度范围：-10°C至+60°C（注3） - 电压额定值：600V AC - 操作湿度水平：最大95%相对湿度（无凝结） - 存储湿度范围：40%至70%

### 功能详解 MCN51系列连接器具有以下特点： 1. 高电流应用：板对板连接器，每个接触点UL认证27A。 2. Hirose独特的压接式连接到PCB（专利申请中）：设计提供可靠且无损的连接。 3. 多种配置的多个接触点：提供8、16和30个接触点。 4. UL认可，CSA认证。

### 应用信息 适用于电信、局域网和数据存储设备、高端服务器以及各种电源供应设备。

### 封装信息 - 绝缘体材料：PBT，黑色，UL94V-0 - 接触材料：铜合金，金镀层 - 引脚和插座：均采用上述材料和镀层

MCN51-8P2-DS 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“MCN51-8P2-DS”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

MCN51-8P2-DS

相关技术文章