MQ138-BS4.8

NEW Universal Plug connectors for PDC Type Digital Cellular Phones MQ138 Series Thin and short cover plug Short cover plug sOverview The universal plug connectors will mate with most PDC type digital cellular phones. The major use of these connectors is for the connections of cellular phones with peripheral equipment. Three out of 16 contacts are removed from the housing for protection purpose of the cellular phones. Standard cover plug sFeatures 1. Will interface with NTT DoCoMo, Vodafone and Tu-Ka cellular phones. 2. Variations T hin and short cover plugs, short cover plugs, and reverse cover plugs are available. Plugs with colors not listed in the catalog can be custom made. Please contact our sales representative for details. 3. Easy Wire Termination The lock spring and release buttons are incorporated in the outer shell, allowing easy placement of the terminated insulator, strain relief clamp and flexible boot. Example of Connections with Peripheral Equipment sApplications PDC type digital cellular phones PDC digital cellular phone Notebook PC MQ138-M-16(13)S-CV 2004.3 1 sSpecifications Rating Characteristic 11. Contact resistance 12. Insulation resistance 13. Dielectric Withstanding Voltage 14. Lock Strength 15. Mating/un-mating forces 16. Durability (mating/un-mating) 17. Vibration 18. Shock Current rating Voltage rating 1A 100V AC Operating temperature range -55ç to +80ç (Note 1) Specification 30 m ohms max. 1000 M ohms min. No flashover or insulation breakdown. No damage, cracks, or parts dislocation. Mating : 29.4N max. Contact resistance: 50 m ohms max. No damage, cracks or parts dislocation. No electrical discontinuity of 10É sec. max. Contact resistance: 50 m ohms max. No damage, cracks, or parts dislocation. Conditions 10 mA (DC or 1000 Hz) 250 V DC 350 V AC / one minute Pull force: 30N max. With corresponding connector. 5000 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours, 3 axis. Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. Temperature : -55ç ➝ +5ç to +35ç ➝ +85ç ➝ +5ç to +35ç Time (Minutes) : 30 ➝ 5 ➝ 30 ➝ 5 5 cycles 96 hours at temperature of 40ç and humidity of 90% to 95% Contact resistance: 50 m ohms max. 19. Temperature cycle Insulation resistance: 1000 M ohms min. No damage, cracks, or parts dislocation. Contact resistance: 50 m ohms max. Insulation resistance: 10 M ohms min. 10. Humidity No damage, cracks, or parts dislocation. Contact resistance: 50 m ohms max. 11. Salt Spray No corrosions 12. Solderability 5% salt water solution for 48 hours No deformation of the insulator parts affecting form, fit or Soldering temperature: 280ç to 300ç function. Recommended solder immersion time: 4 seconds max. Note: Includes temperature rise caused by current flow. sMaterials Component Insulator Female contacts Cover Lock Push Button Lock spring Material Polyamide Copper alloy Polycarbonate or ABS Thermoplastic compound Stainless steel Finish Color: Black or Brown Gold plating Color: Black (Note1) Color: Light gray ------------------- Remarks UL94V-0 ------------------------------------------------------------------------- Note1: Outer shells available in various colors. Refer to page 3. sOrdering Information MQ138 T - M - 16 (13) S - CV 1 1 Series name 2 Plug length Blank T S : Standard : Thin and Short : Short M :Universal Plug 2 3 4 : MQ138 Series 5 6 4 Number of contact 5 Contact type 6 Plug type CV CVR : Standard type : Reverse type 13 S: Female contact 3 Connector type 2 sThin and short cover type (5.4) (4.2) (20) 5.4 (10.5) 5 17.5 (16) 18.9 20.4 4.8 Color of outer housings Gray Ivory White Part Number MQ138T-M-16(13)S-CV MQ138T-M-16(13)S-CV(03) CL No. CL206-2252-9 CL206-2252-9-03 No.7 No.1 No.15 No.9 sShort cover type (Ø 5) (R 5) (25) 7 (2.2) (14) (17) (18.9) 23 No.7 No.1 No.15 No.9 Marking Cover Color Gray Part Number MQ138S-M-16(13)S-CV1 MQ138S-M-16(13)S-CV1(01) MQ138S-M-16(13)S-CV1(02) MQ138S-M-16(13)S-CV1(03) MQ138S-M-16(13)S-CV2 MQ138S-M-16(13)S-CV2(01) MQ138S-M-16(13)S-CV2(02) MQ138S-M-16(13)S-CV2(03) MQ138S-M-16(13)S-CV MQ138S-M-16(13)S-CV(01) MQ138S-M-16(13)S-CV(03) CL No. CL206-2157-8 CL206-2157-8-01 CL206-2157-8-02 CL206-2157-8-03 CL206-2191-6 CL206-2191-6-01 CL206-2191-6-02 CL206-2191-6-03 CL206-2192-9 CL206-2192-9-01 CL206-2192-9-03 BRemarks[Thin and short cover plugs and Short cover plugs] 1 Thin and short cover plugs, and short cover plugs will not accept coaxial connectors. Use standard cover plugs for installing coaxial connectors. 2 The short cover plugs will not be supplied with the cable bushing. The cable bushing needs to be integrately molded to the cable. Refer to the customer drawing for recommended dimensions. 3 Power contacts are removed from the housing. NTT DoCoMo Black Light Gray Ivory White Vodafone or Tu-Ka Gray Black Light Gray Ivory White Gray No marking Black Ivory White 5 19.5 3 sStandard cover type (Ø 7. 4) (16) (R 3) 10 (3) (14) (17) (18.9) 23 Connector type Standard type Reverse type Part Number MQ138-M-16(13)S-CV MQ138-M-16(13)S-CVR CL No. CL206-0749-6 CL206-2031-0 No.7 No.1 No.15 No.9 sCable bushing(For standard cover only) sStandard cover type D E 5 32 C B A Cable Dia. 4mm 4.8mm 5.2mm Part Number MQ138-BS(4.0)(01) MQ138-BS(4.8)(01) MQ138-BS(5.2)(01) CL No. CL206-0890-4-01 CL206-0683-0-01 CL206-0662-0-01 Option A B C D E Plug Strain Relief Clamp Flexible Boot Label Coaxial contact sClamp sCoaxial contact Cable Dia. 4mm 4.8mm 5.2mm Part Number MQ138-CM(4.0) MQ138-CM(4.8) MQ138-CM(5.2) CL No. CL206-0891-7 CL206-0684-2 CL206-0664-5 sLabel Applicable cable Coaxial/signal combined cable Part Number MS-138-C(P)-1 MS-138-C(P)-1 MS-138-C(P)-2 CL No. CL358-0088-3 CL358-0100-7 CL358-0101-0 Part Number MQ138-M-LABEL CL No. CL206-0769-3 1.5D-2W 0.8D-2W 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements. 4