NX1-15T-KT3K

Simple Assembly Type PC Card Frame Kits NX1 Series Back connector 68-contact socket Frame+Metal panel Figure 1 sFeatures 1. Great reduction of the number of frame kit assembly steps Use of this simple assembly method has greatly reduced the number of assembly steps. Processes such heat fusion and cooling of the covers are no longer required. Assembly of the frame kit is possible using simple jig tools. (See the Simple Assembly Method insert to the right.). Simple Assembly Method 2. Excellent Shielding Qualities The covered construction using a metal panel out to the sides of the card provide excellent shielding qualities. (See Figure 4.) 3. Board Offset Available in types with board offsets of 0.3mm and 0.9mm. Figure 2 4. Back connectors Back Connectors available with 15,25, and 32 contacts. 5. Can Be Used With CardBus Types 6. Stable Conduction Maintained Between Panels The spring quality of the metal ensures stable conduction to be maintained between the panels at the panel lock portion. 7. Conduction Maintained Between Panel and Board The cunduction between panel and board is maintained by contact between the panel and a one-body ground spring. Figure 3 Metal panel covers all the way to the card sides sApplications A wide variety of PC cards including LAN, FAX modem, and SCSI. Figure 4 (For details, see the frame Kit assembly procedure on page 6) B2 sProduct Rating Operating temperature range -30ç to +70ç sMaterials Part Frame Panel Material PBT Stainless steel Color Black Dull Finish Black Remarks UL94V-0 ------510-FR Insulation tape Polyester sOrdering Information NX1B L - 32 T - KT 3 B (05) q w er t yu i q Series name r Suitable back connectors u Type of suitable 68-contact connectors NX1 : General type NX1B : Card bus type w Card key type T: NX Series t Connector type K: General type (IC1K Series) B: Card Bus type (IC9 Series) i Presence of insulation tape KT: Frame kit y Offset None : 5 V type L : 3.3 V type e Number of back connector 3: 0.3mm 9: 0.9mm 05 : With insulation tape 06 : Without insulation tape 15, 25, or 32 sConnector Mounting Condition q0.9mm Offset Type 0.25 (Panel thickness + Insulation tape thickness) q0.3mm Offset Type (Panel thickness + Insulation tape thickness) 5 MAX 5 MAX 3.3 3.3 Connector portion 0.5 MAX 3.1 Connector portion SMT contacts PCB sLabel Dimensions(Recommended Label Thickness: 50µm) 63±0.2 0.8 4- R3 .5± 0.2 38±0.2 1.4 0.5 MAX 0.9 2.5 SMT contacts 0.3 0.05 0.25 Panel 0.05 Panel B3 sNX1 Series (General Type Frame Kit) Panel A Panel B Number of Contacts 15 25 32 Offset (mm) 0.9 0.3 0.9 0.3 0.9 0.3 Frame Kit Part Number CL No. Suitable 68-Contact Socket Connectors Part Number CL No. 640-0047-2 640-0046-0 640-0047-2 640-0046-0 640-0047-2 640-0046-0 Suitable Back Connectors Part Number NX60TB-15SAA9-SP NX60TB-15SAA3-SP NX60TA-25SAA9-SP NX60TA-25SAA3-SP NX60TB-32SAA9-SP NX60TA-32SAA3-SP CL No. 234-0097-6 234-0098-9 234-0107-8 234-0033-3 234-0023-0 234-0053-0 NX1-15T-KT9K(**) 234-2102-5-** IC1K-68RD-1.27SFA NX1-15T-KT3K(**) 234-2103-8-** IC1K-68RD-1.27SF NX1-25T-KT9K(**) 234-2104-0-** IC1K-68RD-1.27SFA NX1-25T-KT3K(**) 234-2105-3-** IC1K-68RD-1.27SF NX1-32T-KT9K(**) 234-2106-6-** IC1K-68RD-1.27SFA NX1-32T-KT3K(**) 234-2107-9-** IC1K-68RD-1.27SF (**) : (05) : With Insulation type (**) : (06) : Without Insulation type B4 sNX1B Series (Card Bus Type Frame Kit) Panel A Panel B Number of Contacts 15 25 32 Offset (mm) 0.9 0.3 0.9 0.3 0.9 0.3 Frame Kit Part Number CL No. NX1BL-15T-KT9B(**) 234-2153-6-** NX1BL-15T-KT3B(**) 234-2154-9-** NX1BL-25T-KT9B(**) 234-2157-7-** NX1BL-25T-KT3B(**) ____ ___ NX1BL-32T-KT9B(**) 234-2155-1-** NX1BL-32T-KT3B(**) 234-2156-4-** Suitable 68-Contact Socket Connectors Part Number IC9-68RD-0.635SFA IC9-68RD-0.635SF IC9-68RD-0.635SFA IC9-68RD-0.635SF IC9-68RD-0.635SFA IC9-68RD-0.635SF Suitable Back Connectors Part Number NX60TB-15SAA9-SP NX60TB-15SAA3-SP NX60TA-25SAA9-SP NX60TA-25SAA3-SP NX60TB-32SAA9-SP NX60TA-32SAA3-SP CL No. 640-0902-5 640-0901-2 640-0902-5 640-0901-2 640-0902-5 640-0901-2 CL No. 234-0097-6 234-0098-9 234-0107-8 234-0033-3 234-0023-0 234-0053-0 (**) : (05) : With Insulation type (**) : (06) : Without Insulation type B5 BBoard Dimensions (Applicable Board Thickness: 0.5 mm Max.) qNX1 Series (General Type) Connector mounting side 0 47 -0.1 qNX1B Series (CardBus Type) Connector mounting side 0 47 -0.2 1 P=0.635±0.03 68-0.4±0.02 45 +0.1 +0 Contact No.67 Contact No.34 Contact No.68 0.635∞67=42.545±0.05 P=0.635±0.03 68-0.4±0.02 8-0.8±0.1 Contact No.67 Contact No.34 Contact No.68 2±0.1 3±0.1 2.5±0.1 5.08±0.1 5.08±0.1 6.35±0.1 5.08±0.1 5.08±0.1 36.83±0.15 5.08±0.1 5.08±0.1 Valied parts mounting area 44±0.2 Ground clip pad 76±0.1 3±0.1 2±0.1 1.5±0.1 3.3 +0.1 +0 0.635∞67=42.545±0.05 Contact No.2 Contact No.35 Contact No.1 Contact No.2 Contact No.35 Contact No.1 5.4±0.1 2±0.1 4.6±0.1 R 4± 0. 1 1 R0 .5 Valied parts mounting area 44±0.2 Ground clip pad 76±0.1 3±0.1 2±0.1 31.65±0.1 1.5±0.1 7.4±0.1 0 2.4 -0.05 3.3 +0.1 +0 31.65±0.1 5.4±0.1 MA X 1 8±0.1 1.1±0.1 .6 f0 .1 +0 +0 P=0.8±0.05 D±0.1 C +0.1 +0 B±0.1 A±0.1 Contact No.1 1.1±0.1 0 0.5 -0.05 8±0.1 0 0.5 -0.05 Last contact No. .6 +0 f0 Last contact No. .1 +0 P=0.8±0.05 D±0.1 C +0.1 +0 B±0.1 A±0.1 Contact No.1 NOTE 1 The dimensions portion of the diagram(i.e.,the dotted line portion) is not required when a positioning jig or another aid is used to mount the connectors. Type Part Number NX1-15T-KT9K(**) NX1-25T-KT9K(**) NX1-32T-KT9K(**) NX1-15T-KT3K(**) NX1-25T-KT3K(**) NX1-32T-KT3K(**) NX1BL-15T-KT9B(**) Number of Contacts 15 25 32 15 25 32 15 25 32 15 25 32 Offset 0.9 A 31.2 39.2 44.8 31.2 B 29.8 37.8 43.4 29.8 37.8 43.4 29.8 37.8 43.4 29.8 37.8 43.4 C 27.2 35.2 40.8 27.2 35.2 40.8 27.2 35.2 40.8 27.2 35.2 40.8 D 11.2 19.2 24.8 11.2 19.2 24.8 11.2 19.2 24.8 11.2 19.2 24.8 NX 1Series (General Type) 0.3 39.2 44.8 31.2 NX1B Series (Card Bus Type Frame Kit) NX1BL-25T-KT9B(**) NX1BL-32T-KT9B(**) NX1BL-15T-KT3B(**) NX1BL-25T-KT3B(**) NX1BL-32T-KT3B(**) 0.9 39.2 44.8 31.2 0.3 39.2 44.8 ✽Please use "NX Series Flame Kit (Not N X 1) "when print processing the panel. (**) : (05) : With Insulation type (**) : (06) : Without Insulation type B6 7.4±0.1 2 0 2.4 -0.05 0 -0.05 2 0 -0.05 BFrame Kit Assembly Process Assembly Process Figure 1 Mount the connectors(68-contact connectors, back connectors) and other parts to the printed circuit board (PCB). NOTE :The procedure for the IC9 Series (suited to the 68-contact connectors and card bus) is to mount the connector body, then insert the ground plate and fasten the lead portion by hand. PCB Assembly Process Figure 2 Insert the PCB mounting part to panel B (frame press fitting item). Back connector 68-Contact connector Panel B Assembly Process Figure 3 Use the assembly jig (described below) to insert panel A. (Press fit + lock) Panel A Assembly Process Figure 4 Assembled item Assembly Jig Assembly Process Figure 5 Affix the label to the indented portion of the panel. NOTE :Hirose Electric Co. Ltd. will not provide label services. (Please refer to the Recommended Label Dimensions Diagram of Page 2.) (The photograph shows the hand press model.) Classification Part Number CL No. 902-3530-7 Without hand press NX1-/CVCK-MP With hand press NX1-/CVCK-MP(01) 902-3530-7(01) B7