PCN11A-100P-2.54BP-2

PCN11 Series (Product Compliant with DIN Standard: Solderless Connection Type) Backplane Connection Plug-Right Angle [PCN12(A)-*P-2.54DS 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100(12A) 3-row: 96(12, 12A) 4-row: PCN 10(A)-128P-2.54DS] Socket- Right Angle PCN10C-*S-2.54DS(double-sided 2-point contacts) PCN13-*S-2.54DS(single-sided 1-point contact) 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100 (16 core for PCN13 only) 3-row: PCN10A(B)-96S-2.54DS PCN13(B)-96S-2.54DS 4-row: PCN10B-128S-2.54DS Plug-Straight PCN10-*S-2.54DSA 2-row: 20, 32, 44, 50, 64, 90, 100 3-row: 96 4-row: 128 Socket-Straight PCN11-*S-2.54PFB(double-sided 2-point contacts) PCN12-*S-2.54DSA PCN13-*S-2.54DSA(single-sided 1-point contact) 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100 3-row: 96 4-row: 128 (PCN11, 13) sFeatures 1. Compliant with the DIN standard Comply with IEC603-2/DIN41612 standards. Cable Type Crimping(AWG22~30) PCN10-*S-2.54DSA 2-row: 20, 50, 64 3-row: 96 Crimping(AWG28) PCN10-64S-2.54R 3-row 96 contact type without row b For connector mating sizes, refer to the application pattern. 2. Variation in number of contacts 10, 16, 20, 32, 44, 50, 64, 90, 96, 100 and 128 contacts are available. Press fit Machine Fig 1 3. Reliabillty contact construction The socket contact is constructed with the high reliability double-sided 2-point contacts. 4. Applicable contact board thickness The applicable contact board thickness is 2.54mm min. 5. Through-hole diameter variation Ø0.8, Ø0.9 andØ1.0 through holes are available. 6. Backplane connection Connected to the Backplane. Refer to the fig 1 7. Compatibility with other series Compatibility with PCN10, 12, and 13 series allows to utilize various application patterns. 8. Press fit machine Press fit machine is available. sApplication PBX, control equipment and so on. A86 sProduct Specifications Rating Current rating: 2A Operating Temperature Range: -30 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Voltage rating: 300V AC Operating Humidity Range: 40 to 80% Operating Humidity Range: 40 to 70% (Note 2) Item 1.Insulation Resistance 10 M ohms 6 Specification 100V DC 1000V AC/1 minute. 0.1A Condition 2.Withstanding Voltage No flashover or insulation breakdown. 3.Contact Resistance 4.Vibration 20m ohms max. No electrical discontinuity of 10µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-65ç : 30 minutes¡15 to 35ç: 5 minutes max.¡ 125ç : 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles 5.Humidity (Steady state) Insulation resistance : 106M ohms min. 6.Temperature Cycle No damage, cracks, or parts looseness. 500 cycles 7.Durability (Mating/un-mating) Contact resistance : 20m ohms max. 8.Resistance to Solderingr heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. s Material qHousing, Contact Board and Key Header Parts Insulator Contact Material PBT Copper alloy Contact area: Gold plated --------------Finish Remarks Remainder: Gold plated qReceptacle, Backplane Housing Parts Insulator Material PBT Finish Beige PFB Contact area: Gold plated Remainder: Tin-lead plated WB Contact area: Gold plated Remainder: Gold flash plated Post area: Gold plated Remarks UL94V-0 Contact Copper alloy --------------- sOrdering Information qHousing PCN11 q A – * P – 2.54 H 2 w e r t y u q Series name : PCN11 w Mounting hole type Blank A r Opening type : With Mounting hole : Without mounting hole e Number of contacts : 20, 32, 44, 50, 64, 90, 96, 100 P : Male connector t Contact pitch : 2.54mm y H : Housing u Board thickness 2 : 2.4mm A87 qContact Board PCN11 q – * P – 2.54 WA – 2 w e r t y q Series name : PCN11 w Number of contacts e Opening type : 20, 32, 44, 50, 64, 90, 96, 100 P : Male connector r Contact pitch : 2.54mm t Contact type WA : Wrapping Backplane (Dia.0.8) WB : Wrapping Backplane (Dia.0.9) WC : Wrapping Backplane (Dia.1.0) y Board thickness 2 : 2.4mm qKey Header (Correspond to Backplane system) PCN11 q – * P – 2.54 KH w e r t q Series name : PCN11 w Number of contacts : 10, 14, 16, 20, 26, 30, 34, 40, 50, 64, 96 e Opening type P : Male connector r Contact pitch : 2.54mm t KH : Key header qReceptacle PCN11 q – * S – 2.54 PFB – 2 w e r t y q Series name : PCN11 w Number of contacts : 10, 16, 20, 32, 44, 50, 64, 90, 96, 100, 128 e Opening type S : Female connector r Contact pitch : 2.54mm t Contact type PFB : Short type (Dia.0.9) WB : Wrapping Backplane (Dia.0.9) y Board thickness 2 : 2.4mm qBackplane Housing PCN11 q A – * P – 2.54 BP – 2 w e r t y u q Series name : PCN11 w Mounting hole type Blank A r Opening type : With mounting hole : Without mounting hole e Number of contacts : 10, 16, 20, 32, 44, 50, 64, 90, 96, 100, 128 P : Male connector t Contact pitch : 2.54mm y BP : Backplane housing (H : 128 contacts only) u Board thickness 2 : 2.4mm A88 s2 Row Backplane (Board thickness: 2.54mm) qHousing With mounting hole PCN11-*P-2.54H-2 Unit:mm Part Number PCN11-020P-2.54H-2 PCN11-032P-2.54H-2 PCN11-044P-2.54H-2 PCN11-050P-2.54H-2 PCN11-064P-2.54H-2 PCN11-090P-2.54H-2 PCN11-100P-2.54H-2 CL No. 583-1050-2 583-1051-5 583-1052-8 583-1053-0 583-1054-3 583-1055-6 583-1056-9 Number of Contacts 20 32 44 50 64 90 100 A 43.3 58.54 73.78 81.4 99.18 132.2 144.9 B 38.1 53.34 68.58 76.2 93.98 127 139.7 C 32.1 47.34 62.58 70.2 87.98 121 133.7 D 29.47 44.71 59.95 67.57 85.35 E 22.86 38.1 53.34 60.96 78.74 118.37 111.76 131.07 124.46 qHousing Without mounting hole PCN11A-*P-2.54H-2 Unit:mm Part Number PCN11A-020P-2.54H-2 PCN11A-032P-2.54H-2 PCN11A-044P-2.54H-2 PCN11A-050P-2.54H-2 PCN11A-064P-2.54H-2 PCN11A-090P-2.54H-2 PCN11A-100P-2.54H-2 CL No. 583-1057-1 583-1058-4 583-1059-7 583-1060-6 583-1061-9 583-1062-1 583-1063-4 Number of Contacts 20 32 44 50 64 90 100 A 32.1 47.34 62.58 70.2 87.98 121 133.7 B 29.47 44.71 59.95 67.57 85.35 C 22.86 38.1 53.34 60.96 78.74 118.37 111.76 131.07 124.46 A89 qContact Board (Board thickness: 2.4.mm) PCN11-*P-2.54WA, WB, WC-2 BPCB mounting pattern WA(Dia.0.8 through-hole) Part Number PCN11-020P-2.54WA-2 PCN11-032P-2.54WA-2 PCN11-044P-2.54WA-2 PCN11-050P-2.54WA-2 PCN11-064P-2.54WA-2 PCN11-090P-2.54WA-2 PCN11-100P-2.54WA-2 CL No. 583-1011-0 583-1012-3 583-1013-6 583-1014-9 583-1015-1 583-1016-4 583-1017-7 Number of Contacts 20 32 44 50 64 90 100 A 32.06 47.3 62.54 70.16 87.94 B 22.86 38.1 53.34 60.96 78.74 Press fit direction WC(Dia.1.0 through-hole) Part Number PCN11-100P-2.54WC-2 CL No. 583-1180-8 Number of Contacts 100 A B 133.66 124.46 120.96 111.76 133.66 124.46 WB(Dia.0.9 through-hole) Part Number PCN11-020P-2.54WB-2 PCN11-032P-2.54WB-2 PCN11-044P-2.54WB-2 PCN11-050P-2.54WB-2 PCN11-064P-2.54WB-2 PCN11-090P-2.54WB-2 PCN11-100P-2.54WB-2 CL No. 583-1043-7 583-1044-0 583-1045-2 583-1046-5 583-1047-8 583-1048-0 583-1049-3 Number of Contacts 20 32 44 50 64 90 100 A 32.06 47.3 62.54 70.16 87.94 B 22.86 38.1 53.34 60.96 78.74 120.96 111.76 133.66 124.46 A90 qKey Header (Board thickness: 2.4mm) PCN11(A)-*P-2.54KH Unit:mm Part Number PCN11A-10P-2.54KH PCN11A-14P-2.54KH PCN11A-16P-2.54KH PCN11A-20P-2.54KH PCN11A-26P-2.54KH PCN11A-30P-2.54KH PCN11A-34P-2.54KH PCN11A-40P-2.54KH PCN11A-50P-2.54KH PCN11A-50P-2.54KH PCN11A-60P-2.54KH PCN11A-60P-2.54KH PCN11A-64P-2.54KH PCN11A-64P-2.54KH CL No. 583-1000-4 583-1001-7 583-1002-0 583-1003-2 583-1004-5 583-1005-8 583-1006-0 583-1007-3 583-1008-6 583-1034-6 583-1009-9 583-1035-9 583-1010-8 583-1036-1 Number of Contacts 10 14 16 20 26 30 34 40 50 50 60 60 64 64 A 19.36 24.44 26.98 32.06 39.66 44.76 49.86 57.46 70.16 70.16 82.86 82.86 87.96 87.96 B 17.5 22.58 25.12 30.2 37.8 42.9 48 55.6 68.3 68.3 81 81 86.1 86.1 C 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 D 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 26.96 4.1 26.96 4.1 26.96 4.1 A91 s3 Row Backplane (Board thickness: 2.54mm) qHousing (With mounting hole) PCN11-96P-2.54H-2 CL583-1032-0 qHousing (Without mounting hole) PCN11A-96P-2.54H-2 CL583-1033-3 A92 qContact Board PCN11-96P-2.54WA, WB, WC-2 BPCB mounting pattern Press fit direction Part Number PCN11-96P-2.54WA-2 PCN11-96P-2.54WB-2 PCN11-96P-2.54WC-2 CL No. 583-1030-5 583-1064-7 583-1181-0 Dia.0.8 through-hole Dia.0.9 through-hole Dia.1.0 through-hole qKey header PCN11-96P-2.54KH CL583-1031-8 A93 sReceptacle: 2 Row Short Type PCN11-*S-2.54PFB-2 Note BPCB mounting pattern Unit:mm Part Number PCN11-010S-2.54PFB-2 PCN11-016S-2.54PFB-2 PCN11-020S-2.54PFB-2 PCN11-032S-2.54PFB-2 PCN11-044S-2.54PFB-2 PCN11-050S-2.54PFB-2 PCN11-064S-2.54PFB-2 PCN11-090S-2.54PFB-2 PCN11-100S-2.54PFB-2 CL No. 583-1109-3 583-1110-2 583-1111-5 583-1112-8 583-1113-0 583-1114-3 583-1115-6 583-1116-9 583-1117-1 Number of Contacts 10 16 20 32 44 50 64 90 100 A 26.42 34.04 39.12 54.36 69.6 77.22 95 128.02 140.72 B 21.42 29.04 34.12 49.36 64.6 72.22 90 123.02 135.72 C 16.42 24.04 29.12 44.36 59.6 67.22 85 118.02 130.72 D 10.16 17.78 22.86 38.1 53.34 60.96 78.74 111.76 124.46 NOTE: With stand off for 64, 90, 100 contacts products A94 sReceptacle: 2 Row Wrapping Backplane Type PCN11-*S-2.54WB-2 Note BPCB mounting pattern Unit:mm Part Number PCN11-10S-2.54WB-2 PCN11-16S-2.54WB-2 PCN11-20S-2.54WB-2 PCN11-32S-2.54WB-2 PCN11-44S-2.54WB-2 PCN11-50S-2.54WB-2 PCN11-64S-2.54WB-2 PCN11-90S-2.54WB-2 PCN11-100S-2.54WB-2 CL No. 583-1076-6 583-1077-9 583-1078-1 583-1079-4 583-1080-3 583-1081-6 583-1082-9 583-1083-1 583-1084-4 Number of Contacts 10 16 20 32 44 50 64 90 100 A 26.42 34.04 39.12 54.36 69.6 77.22 95 128.02 140.72 B 21.42 29.04 34.12 49.36 64.6 72.22 90 123.02 135.72 C 16.42 24.04 29.12 44.36 59.6 67.22 85 118.02 130.72 D 10.16 17.78 22.86 38.1 53.34 60.96 78.74 111.76 124.46 NOTE: With stand off for 64, 90, 100 contacts A95 sReceptacle : 2 Row Backplane Type (t=2.4mm board) qHousing (With Mounting hole) PCN11-*P-2.54BP-2 Unit:mm Part Number PCN11-010P-2.54BP-2 PCN11-016P-2.54BP-2 PCN11-020P-2.54BP-2 PCN11-032P-2.54BP-2 PCN11-044P-2.54BP-2 PCN11-050P-2.54BP-2 PCN11-064P-2.54BP-2 PCN11-090P-2.54BP-2 PCN11-100P-2.54BP-2 CL No. 583-1131-2 583-1132-5 583-1133-8 583-1134-0 583-1135-3 583-1136-6 583-1137-9 583-1138-1 583-1140-3 Number of Contacts 10 16 20 32 44 50 64 90 100 A 30.6 38.22 43.3 58.54 73.78 81.4 99.18 132.2 144.9 B 25.4 33.02 38.1 53.34 68.58 76.2 93.98 127 139.7 C 16.77 24.39 29.47 44.71 59.95 67.57 85.35 118.37 131.07 D 10.16 17.78 22.86 38.1 53.34 60.96 78.74 111.76 124.46 qHousing (Without mounting hole) PCN11A-*P-2.54BP-2 Unit:mm Part Number PCN11A-10P-2.54BP-2 PCN11A-16P-2.54BP-2 PCN11A-20P-2.54BP-2 PCN11A-32P-2.54BP-2 PCN11A-44P-2.54BP-2 PCN11A-50P-2.54BP-2 PCN11A-64P-2.54BP-2 PCN11A-90P-2.54BP-2 PCN11A-100P-2.54BP-2 CL No. 583-1141-6 583-1142-9 583-1143-1 583-1144-4 583-1145-7 583-1146-0 583-1147-2 583-1148-5 583-1150-7 Number of Contacts 10 16 20 32 44 50 64 90 100 A 19.4 27.02 32.1 47.34 62.58 70.2 87.98 121 133.7 B 16.77 24.39 29.47 44.71 59.95 67.57 85.35 118.37 131.07 C 10.16 17.78 22.86 38.1 53.34 60.96 78.74 111.76 124.46 A96 sReceptacle: 3 Row Short Type PCN11-96S-2.54PFB-2 CL583-1118-4 BPCB mounting pattern sReceptacle: 3 Row Wrapping Backplane Type PCN11-96S-2.54WB-2 CL583-1085-7 BPCB mounting pattern A97 sReceptacle: 3 Row Backplane Type (t=2.45 board) qHousing (With Mounting hole) PCN11-96P-2.54BP-2 CL583-1139-4 qHousing (Without mounting hole) PCN11A-96P-2.54BP-2 CL583-1149-8 A98 sReceptacle: 4 Row Short Type PCN11-128S-2.54PFB-2 CL583-1119-7 BPCB mounting pattern sReceptacle: 4 Row Wrapping Backplane Type PCN11-128S-2.54WB-2 CL583-1086-0 BPCB mounting pattern A99 s Receptacle: 3 Row Backplane Type (t=2.45 board) qHousing Without mounting hole PCN11A-128P-2.54H-2 CL583-1151-0 A100 BApplication ' Mounting hole center q2-row type C.L. Center line q3 Row Type q4-row type For other combination application patterns, refer to the PCN10 Series catalog. A101 BRecommendation for Press fit Board Assembly If boards are furnished from the users, HIROSE will assemble the connectors. Please confirm following requirements. 1Board size: 600 x 600mm max. 2Board through-hole pitch The board punching bench is designed in the 2.54mm pitch grid. Set the through-hole pitch to pitch (connector side) size to 2.54 x n. 3Connector punching surface indication For indication on the connector punching surface, mark "FRONT" or "F", and "BACK" or "B" on the reverse side in order to clearly identify the front and rear sides. In addition, the punching direction should be clearly marked. 4Clearly indicate the board No. and marking position. 5Clearly indicate board mounting hole positions and hole diameters. In addition, we provide the press fit board assembly from the both sides, For further information, consult HRS company. BAssembly Drawing qPCN11 A102 BAssembly Drawing qPCN11 Socket Type · Combination with PCN10, 12 and 13 can be selected alternatively. · In connection with the backplane, various assemblies are available. (2.4mm thickness board) Plug-Right Angle PCN12(A)-*P-2.54DS 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100(12A) 3-row: 96(12, 12A) 4-row: PCN 10(A)-128P-2.54DS Socket- Right Angle PCN10C-*S-2.54DS (double-sided 2-points contacts) PCN13-*S-2.54DS (single-sided 2-point contact) 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100 (16 for PCN13 only) 3-row: PCN10A(B)-96S-2.54DS PCN13(B)-96S-2.54DS 4-row: PCN10B-128S-2.54DS Plug-Straight PCN10-*S-2.54DSA 2-row: 20, 32, 44, 50, 64, 90, 100 3-row: 96 4-row: 128 Socket-Straight Cable Type Crimp(AWG22 to 30) PCN10-*S-2.54DSA 2-row: 20, 50, 64 3-row: 96 IDC(AWG28) PCN10-64S-2.54R 3-row 96 contact type without row b PCN11-*S-2.54PFB-2 (double-sided 2-points contacts) PCN12-*S-2.54DSA PCN13-*S-2.54DSA (single-sided 2-point contact) 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100 3-row: 96 4-row: 128 (PCN11, 13) ] For connector mating sizes, refer to the application pattern. A103 sRecommended Press fit Through-hole (1) Ø0.8 Drill dia. Finish dia. Ø0.9±0.025 Ø0.8±0.08 (2) Ø0.9 Drill dia. Finish dia. Ø1.0±0.025 Ø0.9±0.08 (3) Ø1.0 Drill dia. Finish dia. Ø1.1±0.025 Ø1.0±0.08 Copper plating 20µm min. Solder plating 5 to 10µm Copper plating 20µm min. Solder plating 5 to 10µm Copper plating 20µm min. Solder plating 5 to 10µm sApplicable Board Material and Board Thickness qt=2.4mm (Board thickness tolerance: ±0.2mm) qMaterial: FR-4, G-10, polyamid BPress fit machine qFeatures qBy changing the board bed and punch tooling, various connectors can be press fitted. qThe easy height adjustment mechanism allows to obtain a proper pressure height to the board thickness. qBy programming the pre-inserted connector, continuous press-insertion services can proceed. Mechanical size Weight Drive source (Width) 1330 x (depth) 1600 x (height) 2000mm 1000kg approx. 200V AC Air supply source: normally 5kg/cm2 Hydraulic output :5t max. 600 x 800 mm max. Press pressure source Board size A104 BPress fit Repair Tool The following tools are used to repair the press fit connector housing and contact. qTool to Remove Housing This tool is used to remove the connector from the board. Part Number PCN11-*S-HP Applicable Product PCN11-*S-2.54PFB-2 PCN11-*S-2.54WB-2 *indicates the number of contacts. qTool to Remove Contact After the housing is removed from the board, this tool is used to remove every contact from the board. Part Number PCN11S-PFB-2-CP PCN11S-WB-2-CP Applicable Product PCN11-*S-2.54PFB-2 PCN11-*S-2.54WB-2 *indicates the number of contacts. A105