PO40G-A-JJ-645

NEW MIL Standard SMP Compatible Push-on Lock Coaxial Connectors PO40G Series sOverview Continuing demand for higher transmission speeds in the communication systems created a need for development of high reliability small coaxial cable/connector systems. Drawing on it’s extensive experience in the development and manufacturing of coaxial connectors, Hirose Electric has developed PO40G line of connectors, capable of fulfilling this need. sFeatures 1. Supports 18 GHz High quality and manufacturing standards assure high performance levels for frequencies of up to 18 GHz. Contact nearest HRS office if higher frequencies coaxial connector of the same configuration are needed. 2.High mated retention forces The built-in locking mechanism assures secure plug / receptacle retention force, needed for high frequency performance. 3.Compatible with MIL standard SMP sApplications Communication equipment, transmission stations, measurement and instrumentation devices, medical diagnostic stations. sMating Diagrams Jack Side s Straight PO40G-J-*** Plug Side s PCB edge mount plug receptacle PO40G-LPR (LD) -SMT s Right-angle PO40G-LJ-*** s Conversion adapter PO40G plug -- SMA plug HRMP-PO40GP-18G s In-line adapter (jack to jack) PO40G-A-JJ-645 s Conversion adapters PO40G jack -- SMA jack HRMJ-PO40GJ-*** 2004.6 1 sProduct Specifications Ratings Nominal characteristic impedance: 50ohms Frequency range: DC to 18GHz Operating temperature range: - 50ç to +125ç Operating humidity: 95% max. Item 1. Contact resistance 2. Insulation resistance 3. Withstanding voltage 4. Return loss 5. Center contact holding force 6. Durability (mating/un-mating, with corresponding plug) 7. Humidity 8. Temperature cycle 9. Salt spray test Center Outer 1000 M ø min. Specification : 6 m ohms max. : 6 m ohms max. 500 V DC 500 V AC / 1 minute DC to 18GHz 100 mA max. Conditions No flashover or insulation breakdown. 20dB min. 0.2N min. Contact resistance Center : 12 m ohms max. Outer : 12 m ohms max. Measured with a 0.35 dia. gauge 500 cycles Insulation resistance: 100 M ohms min. (high humidity) Insulation resistance: 1000 M ohms min. (dry) No damage, cracks or parts dislocation. No corrosion 240 hours (10 cycles) at temperature of 10ç to 65ç, RH 90% to 98% Temperature: - 65ç ➝ +125ç Time: 30 ➝ 30 (Minutes) 5cycles 5% salt water solution, 48 hours sMaterial and Finishes Part Shell Center contact Insulator Plug external spring portion Receptacle, shell body, remaining components Pin Socket Material Beryllium copper Stainless steel Phosphor bronze Beryllium copper PTFE (Polytetrafluoroethylene) Gold plated Finish Gold plated, passivated Gold plated Gold plated Color: White sOrdering information 1 Series name : PO40G 2 Connector type J : Straight jack LJ : Right-angle jack LPR : PCB edge mount plug receptacle A : In-line adapter 3 Cable type or terminal type 119 : 0.047 in. outer dia. semi-flexible cable 219 : 0.085 in. outer dia. semi-flexible cable SMT : SMT type Insertion Loss (dB) PO40G 1 2 3 sTypical Data PO40G-J-219 double ended coaxial cable (100mm) 0.085 inch outer dia. semi-flexible cable 0 Return Loss (dB) 10 20 30 40 50 60 0 -0.5 -1 0 5 10 Frequency (GHz) 15 20 2 sStraight Jack (DC to 15 GHz: Return Loss 20dB min.) PO40G-J-219 PO40G-J-119 Ø3.4 6.4 6.4 Part Number PO40G-J-119 PO40G-J-219 Cable type 0.047 inch outer dia. semi-flexible cable 0.085 inch outer dia. semi-flexible cable * Sold only as complete cable assemblies. sRight-angle Jack (DC to 10 GHz: Return Loss 20dB min.) PO40G-LJ-219 PO40G-LJ-119 Ø4.8 5.3 6.7 5.3 6.7 Part Number PO40G-LJ-119 PO40G-LJ-219 Cable type 0.047 inch outer dia. semi-flexible cable 0.085 inch outer dia. semi-flexible cable * Sold only as complete cable assemblies. sPCB edge mount plug receptacle 6.5 4.5 Ø0.65 4.2 Ø5 0.35 Note: Mating side -- LIMITED DETENT Part Number PO40G-LPR(LD)-SMT CL No. CL338-0315-9 sIn-line Adapter (Jack to Jack) Ø3.4 6.45 Part Number PO40G-A-JJ-645 CL No. CL338-0310-5 4 Ø4.8 Ø3.4 3 sConversion Adapters qSMA conversion adapter launcher type (Mating portion: PO40G jack - SMA jack) 1/4-36UNS-2A Part Number HRMJ-PO40GJ-BPA 8.35 17 Ø6.3 CL No. CL311-0372-3 qSMA conversion adapter (Mating portion: PO40G jack - SMA jack) 1/4-36UNS-2A Ø6.6 Part Number HRMJ-PO40GJ-18G 14.3 CL No. CL311-0370-8 qSMA conversion adapter (Mating portion: PO40G plug - SMA plug) 1/4-36UNS-2A 8HEX Note: Mating side -- LIMITED DETENT Part Number 14.5 2.97 CL No. CL311-0371-0 HRMP-PO40GP-18G sConnector extraction tools Sold separately Connector Part Number PO40G-LJ-*** PO40G-J-*** Applicable Tool Part Number PO40G-J-N1 *PO40G-J-N1 *PO40G-J-N2 CL No. CL350-0142-6 CL350-0142-6 CL350-0143-9 Notes Photo (1) Photo (2) Note: Both tools are required. Right-angle Jack (PO40G-LJ-***) Straight Jack (PO40G-J-***) PO40G-J-N1 Extraction tool PO40G-J-N1(Rear) Extraction tool PO40G-J-N2(Front) Extraction tool Photo (1) Photo (2) Note 1: After initial release with the tool the connector can be removed with hand. Note 2: The extraction tools must be used only with specified Hirose Electric connectors. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 4