PX50-SC-TC

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Shape of opening prevents reverse insertion sFeatures 1. Power supply connector for high-current Withstands voltage of 2200V AC max. and 10A/contact (60A/6contacts) of rating current. Reliable contact structure retainer 2. Housing design prevents incorrect insertion Opening section is designed to prevent reverse insertion and mating direction is easily checked. Additionally, the opening section is keyed to prevent misalignment of plugs in parallel applications. Sealing section (3 contacts) As this window is opened, contact section can easily be checked. Wall structure prevents retainer deformation 16-18 Contact spring guard section Applicable Wire Size (AWG No.) Since the retainer portion is lowered by onestep, the possibility of spring deformation is minimized even if the lock is released. 3. Reduced Size When compared to traditional products, Hirose’s plug is smaller in size by 65% and the receptacle is smaller by 55%. 4. Reliable contact structure ➀Three point contact ➁Gold plated contacts (standard) with high-level environmental resistance ➂Contact spring guard structure ➃Structure prevents retainer deformation Label space 5. Easy Cable Assembly ➀Use of dedicated crimping tools will make harness work easier.One tool crimps both AWG#16 and AWG#18 wire. ➁Positive lock can be felt on contact insertion. ➂Release of contact lock can easily be performed with dedicated jig, which facilitates the wiring modification after assembly. Avoid any short between adjacent contacts Two layer structure enables high-density mounting. 2006.3 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. sProduct Specifications Operating temperature range Ratings Voltage rating Current rating Description 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage 4.Durability 5.Vibration 6.Shock 10mø max. 1000Mø min. No flashover or insulation breakdown. Specifications 100mA 500V DC 2200V AC / 1 minute. 1000 cycles Frequency:10 to 55Hz,single amplitude of 0.75mm, 2 hours,3axis Acceleration: 490m/s2 Duration: 11ms Test at sine half-wave, 3 axes, bi-directional three times, respectively. Temperature : -55/+5~+35/+85/+5~+35ç 10 10 Time : -30/+ ~+15/+30/+ ~15Minutes 5 cycles -55ç~+105ç 600V AC 10A Requirements ➀Contact resistance : 20mø max. ➁No damage, cracks or looseness of parts ➀No electrical discontinuity of 10µs or more. ➁Contact resistance : 20mø max. ➂No damage, cracks or looseness of parts ➀Contact resistance : 20mø max. ➁Insulation resistance : 1000Mø min. ➂No damage, cracks or looseness of parts ➀Contact resistance : 20mø max. ➁Insulation resistance : 1000Mø min. ➂No damage, cracks or looseness of parts ➀No corrosions 7.Temperature cycle 8.Humidity 9.Salt spray 96 hours at 40±2ç and humidity of 90~95% 5% salt water for 48 hours sMaterials Parts Contacts Insulator Metal fixture Material Copper alloy PBT (UL94V-0) Copper alloy Tin reflow plating Finish Gold plating BComparison In Size With Conventional Equivalent (mm) PX Width Plug Height Depth Width Receptacle Height Depth 34.2 07.0 23.0 28.0 14.8 27.4 A company-made 07.15 22.80 39.40 18.47 27.18 A Plug A Receptacle 12 12 A 6 width width 7 F A depth F R F S For volume ratio, plug is downsized to : nearly 65%; and receptacle : nearly 55%. 1 2 height height depth 6 11 5 10 4 9 3 PX10 AF6WP 8 2 7 1 1 2 3 4 5 6 44.94 PX50-AF6S The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. sReceptacles q6position/2row Type Part No. PX10-AF6WP(50) CL No. 236-0001-0-50 RoHS YES BDimensions For Circuit Board BPCB mounting pattern Installation(For your reference) t=1.6~2.4 ✽ Where t=1.6 (Setting value depends on thickness of boards.) 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. q4Position/2 Row Type Part No. PX10-AD4WP(50) CL No. 236-0005-0-50 RoHS YES Label space size 17.2∞10.2 25.2 terminal No.5 21.2 terminal No.8 5 D A 8 R D A 7.3 S 1 4 14.8 27.4 terminal No.1 3.4 10.2 22.8 terminal No.4 4.1 3.8 8.4 8 6.7 11.4 BDimensions For Circuit Board BPCB mounting pattern t=1.6~2.4 5. 09 Installation(For your reference) 10.2 P=3.4 terminal No.6 terminal No.5 terminal No.2 terminal No.1 .75 R0 1.4 8-Ø -hole) ugh 1.5 thro terminal No.8 terminal No.7 terminal No.3 P= 3.8 terminal No.4 (6) (8) ( 3.7 π 6.7 11.4 board end (through-hole) 22.8 connector position ✽ Where t=1.6 (Setting value depends on thickness of boards.) 4 4.5 8 4 7 3 PX10 AD4WP 6 2 5 1 5. 09 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. sPlug q6-Position Type Part No. PX50-AF6S CL No. 236-0002-2 RoHS YES q4-Position Type terminal No.2 terminal No.1 terminal No.3 terminal No.4 (This picture shows the state of cable insertion.) A 1 2 3 4 Part No. PX50-AD4S CL No. 236-0006-3 RoHS YES PX50 --- AD4S 21.5 23 21.2 27.4 Label space size 11.6∞6.1 A D 7 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. sSimple-Type Plug Holder Cover qFor 6-Position Type Part No. PX-6WS-CV CL No. 236-0004-8 RoHS YES qFor 4-Position Type 22.8 15.9 A Part No. PX-4WS-CV CL No. 236-0007-6 RoHS YES PX4WS-CV Label Space Size 17.2∞6.1 BInstallation status ➀ ➁ BInstallation method q6-Position Type ➂ ➃ q4-Position Type A D 10.6 PX50-AD4S (2-layerd) 1 2 3 The holder cover is not a rugged support fixture but only meant for alignment of the plugs. If external force is imposed by pulling of cables, etc. before mating, please bundle all cables together around the connector with union bands, etc. 6 A D A 4 PX4WS-CV The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. sCrimp contact Applicable wire size 16, 18 Packaging Reel Bag Part No. PX50-SC-231 PX50-SC-131 CL No. 236-0003-5 236-0008-9 Quantity 5,000 200 RoHS YES Please order by integral multiple of the packing volume. sTools Type Automatic Manual Description Press unit Applicator Hand tool (✽) Part No. CM-105 AP105-PX50-3 HT104/PX50-3 PX50-SC-TC CL No. 901-0005-4 901-2573-8 250-0229-4 250-0233-1 Applicable contacts PX50-SC-231 PX50-SC-131 PX50-SC-✽31 Contact extraction tool ✽ For our manual crimping tools, we employ the rotate-replace procedure to use the crimper depending on wire size. Applicable AWG size Rotate to set the crimper such that applicable AWG size fits the crimping section. Note : Since manual crimping tool cannot provide fine adjustment of crimp height, please use the proper crimp height of auto crimper in crimping of the wires other than specified ones 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. sCrimp Terminal Drawing Jig Part No. PX-50-SC-TC CL No. 250-0233-1 RoHS YES PX50-SC-TC CL250-0233-1 When the crimp terminal drawing jig is inserted and pushed from the fitting section of a connector as shown below, retainer lock of the terminal will be released. Then please extract the cable. If the retainer is too lowered after extracting terminal, put it in a former position and reinsert. Position and direction of the jig top to be inserted are as shown in the Figures below. Be careful that any mistake will lead to the damage of terminal. qHow To Extract Crimp Terminal ➀ ➁ ➂ ➃ ✽ Insert the jig top into the peak of convex section on terminal hole. ® 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 8 The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.