TM11R-5M2-88-LP

NEW Subminiature, LAN Modular Jack Connectors TM11R-5M2 Series sFeatures 1.Fast Ethernet Support Conforms to the TIA/EIA-568-A data wiring standard and meets requirements of CAT5 transmission performance for 1,2-3,6 conductor pairs. As such, these products fully support Fast Ethernet (100BASE-TX) transmission. 13.4 24 16 21 2. Subminiature Design Contributes to Saving Space in the Equipment Having built-in optical indicators, with height of only 11.5mm, width of 15mm and depth of 17.5mm the connectors can be used in extremely limited spaces. Other series TM21R--5C--88--LP 17.5 15 14.5 3. Built-in Optical Indicators Optical indicators are integral part of the connectors help saving space on customer’s board. Compared with LED type indicators, they do not emit any electrical noise. TM11R--5M2--88--LP Space saving 4. EMI protection Metal shield covers the outer surfaces of the connectors assuring complete protection against electromagnetic interference. Built-in multiple shield and ground contacts assure reliable connection with the mounting panel as well as with the mating connectors. housing LED optical indicators are taking place 5. Environmental considerations Plating is lead-free in order to protect environment. 6. FCC Standards Meets requirements of FCC Title 47, Part 68, Subpart F. EMI protection sApplications Telecom Hubs, Routers, Bridges and ATM Transmission Equipment, Ethernet Switches and Networking Equipment, Test and Measurement Equipment, Medical Diagnostic Equipment. 11.5 Built-in LED type (Possibility of electromagnetic noise emission and interference.) Built-in Optical pipe type (No electromagnetic noise emission.) 2002.8 1 sProduct Specifications Current rating Rating Voltage rating 125 V AC 1A Operating temperature range : -25ç to +80ç (Note) Item 1. Insulation resistance 2. Dielectric Withstanding Voltage (between adjacent contacts) 3. Withstanding voltage (between contact and shield) 4. Contact resistance 5. Vibration 6. Shock 7. Durability (mating/un-mating) 8. Temperature cycle 100 M ohms min. Specification 100 V DC Conditions No flashover or insulation breakdown No flashover or insulation breakdown 230 m ohms max. No electrical discontinuity of 5 µ sec. or more. Contact resistance: 250m ohms max. No electrical discontinuity of 5 µ sec. or more. Contact resistance: 250m ohms max. Contact resistance: 250m ohms max. Contact resistance: 250 m ohms max. Insulation resistance: 100 M ohms min. Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) Insulation resistance: 10 M ohms min. (Dry state) Contact resistance: 250 m ohms max. 500 V AC applied for one minute 1500 V AC / one minute 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours / 3 axis Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 200 cycles Temperature: -55ç/+15ç to +35ç/+85ç/+15ç to +35ç Duration: 30/2 to 3/30/2 to 3(Minutes) 5 cycles 500 hours at temperature of 40ç and humidity of 90% to 95% Exposed to density 5% salt water for 48 hours 9. Humidity 10. Salt Spray Note :Includes temperature rise caused by current flow. sMaterials Part Insulator Contact Optical pipe Shield Material PBT Copper alloy Polycarbonate Copper alloy Finish Color: Black Contact area: Gold plating Termination area: Tin alloy plating Color: Transparent Tin plating Remarks UL94V-0 ------UL94V-0 ------- sOrdering information qJacks TM11 R - 5M2 - 8 8 - LP 1 2 3 45 6 1 Series name 2 Connector type 3 Jack type TM11 Series R: Jack 5M2: PCB Right-angle through hole type 4 Jack opening code 8: 8 contacts 5 Number of inserted contacts 6 Optical pipe 8: 8 contact LP: With optical pipe inserted Blank: Without optical pipe 2 sModular Jack Connectors Supporting CAT5e (for 1,2-3,6 pair) qSingle Port With Built-in Optical Pipe Contact No. 8 Contact No. 1 0.8 15 14.5 ( 4.25 ) 11.5 11.5 3 3.6 0.6 0.45 11.4 14.75 0.25 (2) 1 5.55 0.3 3.1 11.25 0.8 0.8 17.5 Part Number TM11R-5M2-88-LP CL No. (4.25) 222-2905-0 2.54 TM11R--5M2 1 PC Contact No. 8 11.1 Contact No. 7 Contact No. 1 Contact No. 2 qSingle Port Without Optical Pipe 14.5 0.8 15 Contact No. 8 Contact No. 1 (4.25) 11.5 3.1 (4.25) 3 3.6 0.6 11.5 0.45 11.4 14.75 0.25 (2) 1 5.55 3.1 0.3 0.8 0.8 Part Number TM11R-5M2-88 CL No. (4.25) 222-2906-2 2.54 Contact No. 8 Contact No. 7 Contact No. 1 Contact No. 2 3.1 (4.25) 1.7 3 BRecommended PCB mounting patterns qWith Built-in Optical Pipe 11.1 8.89 6.35 3.81 1.27 LED location area LED light emission area Contact No. 1 No conductive traces 8-Ø1 7531 3.1 8642 2-Ø1.6 2- Ø2.4 Printed board edge Connector front edge 11.4 14.75 2 qWithout Optical Pipe 8.89 6.35 3.81 1.27 2.54 8- Ø1 1 No conductive traces Contact No. 3.1MAX 11.4 MAX 2.54 11.25 3.1MAX 11.4 MAX 5 MIN 7 5 6 4 3 2 1 3.1 8 2 MIN 5MIN 2 2- Ø1.6 2-Ø2.4 11.4 MIN 18.1MIN Printed board edge Connector front edge 11.4 14.75 No conductive & ground traces No conductive & ground traces 2MIN 11.4 MIN 18.1 MIN 4 LED light emitting center Suggested LEDs 2.7 MAX 3.2MAX 1.5 MAX *Recommendations for PCB Design 1 Areas indicated should be free of conductive traces. 2 Area indicated should be free of conductive & ground traces. 3 Recommended board thickness: 1.6mm. To assure that the indicator light pipes operates correctly the LED’s must be installed directly on the PCB, within 4 recommended dimensions and with light emitting center in upward direction. Contact applicable manufacturer for LED specification. BPanel Cutout qFor Both Types, With and Without Built-in Optical Pipe (33) Lock lever 15.4 1 3±1 1 TM21P--88P 1MIN 1 4.5MIN 0.3 Panel side 12 PCB mounting surface 1 Connector front surface 1 0 2 -0.7 3.1MAX 5.55 *Recommendations for Panel Design 1 The shield contacts should connect with the panel cut-out on all sides. 4 BCAT5 Transmission Characteristics Data For fully mated receptacle (TM11R-5M2-88-LP) and plug (TM21P-88P). qSignal Attenuation 0.5 0.4 Attenuation(dB) 0.3 0.2 0.1 0 0 20 40 60 80 100 Frequency(MHz) 1,2 3,6 CAT5 Spec qNear-End Crosstalk (NEXT) 90 80 70 60 50 40 30 20 10 0 0 20 40 60 80 100 Frequency(MHz) 1,2-3,6 CAT5 Spec qReturn Loss 80 70 60 50 40 30 20 10 0 0 20 1,2 40 60 Frequency(MHz) 3,6 CAT5 Spec 80 100 5 Return Loss(dB) NEXT(dB)