TM23R-5A88

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. CAT 6 Data Wiring System Connectors TM23 Series ■Features 1. High-Speed Data Transfer Attenuation/PSNEXT (dB) 100 90 80 70 60 50 40 30 20 10 0 Permanent Link PSACR Conforms to the TIA/EIA-568B.2-1 data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such, these products easily support Gigabit Ethernet (1000BASE-T/1000BASE-TX), which is the next generation of high-speed applications. Measured value CAT 6 PSNEXT standard value 2. A Product Lineup Focused on Building of a Complete System In addition to modular plugs, Hirose Electric offers box type outlets, patch panels, and wall outlets. Systems built using all components from the same manufacturer will assure stable data transfer. CAT 6 Attenuation standard value 1 10 Measured value 100 1000 Frequency (MHz) 3. Support of a Wide Variety of Manufacturers' CAT 6 Cable To assure high performance of the system we test and monitor data transfer using CAT 6 cables manufactured by different suppliers. 2008.4w 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS M23 Series●CAT 6 Data Wiring System Connectorsthe products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. T products have been discontinued, or will be discontinued soon. Please check ■Plugs, Boots ■Specifications Rating Item Current rating Voltage rating 1A 125V AC Operating temperature range -25ç to +60ç (Note) Specification 100 V DC 500 V AC / one minute Conditions 1. Insulation resistance 100 M ohms min. 2. Withstanding voltage No flashover or insulation breakdown. (between adjacent contacts) 3. Contact resistance 230 m ohms max. No electrical discontinuity of 5μs min. 4. Vibration Contact resistance : 250m ohms max. No electrical discontinuity of 5μs. min. 5. Shock Contact resistance : 250m ohms max. 6. Durability Contact resistance : 250m ohms max. (mating/un-mating) 7. Temperature cycle Contact resistance : 250 m ohms max. Insulation resistance : 100 M ohms min. 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 6 axes. 200 cycles Temperature : -55±3ç ➝ +15ç to +35ç ➝ +85±2ç ➝ +15ç to +35ç Duration (Minutes) : 30+5 ➝ 2 to 3 ➝ 30+5 ➝ 2 to 3 0 0 5 cycles 500 hours at temperature of 40ç and humidity of 90% to 95%. 5% salt water/48 hours. Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) Insulation resistance: 100 M ohms min. (Dry state) 9. Salt Spray Contact resistance: 250 m ohms max. Note: Includes temperature rise caused by current flow. 8. Humidity ■Materials and Finishes Plugs Component Insulator Contacts Strain relief clamp Material Polycarbonate Phosphor bronze Brass Finish Color: Clear Contact area: Gold plated Nickel plated Remarks UL94V-0 ------------------------------------- Boots Component Insulator Material EPTR Finish White (Standard color) Black, red, blue, yellow, green, orange, gray, light blue Remarks UL94V-0 ------------------- ■Ordering Information ● Plugs 1 Series name 2 Connector type 3 Size 4 Inserted contacts P 8 : TM23 : Plug : 8 contacts TM23 - P - 8 8P 1 2 3 4 8P : 8 contacts ● Boots 1 Series name 2 Connector type 3 Size 4 BT P 8 : TM23 : Plug : 8 contacts : Boot TM23 - P - 8 BT 1 2 3 4 ● Jacks 1 Series name 2 Connector type 4 Jack opening code 5 Number of inserted contacts R : TM23 : Jack TM23 R - 5A 8 8 1 2 3 4 5 3 Mounting style/termination type 5A : Right-angle/through hole 8 8 : For 8 contacts : 8 contacts 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS TM23at www.hirose-connectors.com, or contact your Hirose sales representative. search Series●CAT 6 Data Wiring System Connectors ■Plugs BOverview . Contact configured for CAT 6 performance. . 0.5 mm dia. solid wire or AWG #24 stranded wire. . Use with cables having external diameters of 5.4 mm to 6.8mm. . Strain relief clamp protects the contact/conductor termination areas. Plug body (25) 6.09 24 Connector guide insert * 11.7 5.4 10.05 (17.5) Strain relief clamp * 8.9 6.6 (12.9) Connecter guide insert (Shown inserted) Contact No. 1 Contact No. 8 17 6 5.05 4.75 C6 1 10.05 TM23P-88P Part No. TM23P-88P CL No. 222-2916-6 RoHS YES BMated with corresponding receptacle (Shown for reference only) (15.45) * Supplied separately(1bag contains 1pcs.) 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS M23 Series●CAT 6 Data Wiring System Connectorsthe products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. T products have been discontinued, or will be discontinued soon. Please check ■Boots BOverview . Dedicated boots for the TM23P-88P. . 9 color variations. . Halogen-free. . Protects the plug’s lock/release lever. 12 10.8 25.3 (12) (4) Ø6 .8 (6.5) (16.9) 13.4 8.8 Part Number TM23P-8-BT(01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) CL No. 222-2917-9-02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 Color White Black Red Blue Yellow Green Orange Gray Light Blue 10.8 (17.2) TM23P-8-BT 1 RoHS YES BBoot installed Protected lock/release lever (40) Ø6.8MAX TM23P-88P 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS TM23at www.hirose-connectors.com, or contact your Hirose sales representative. search Series●CAT 6 Data Wiring System Connectors ■Manual Termination Tool HRS marking side (For contact/conductor termination) A Reverse side (For cable strain relief clamp crimping) Part No. HT601-TM23/22P-88P CL No. 902-2128-1 * Changing the “A” Assembly parts to TM22 dedicated clamp parts will allow wiring of Hirose’s TM22P-88P plugs supporting CAT 5e. ● Automatic Contact Termination Machine Item Body Applicator Part Number CM-105 AP105-TM23P-88P CL No. CL901-0005-4 CL901-2588-5 ● Cable Strain Relief Clamp Crimping Jig (Manual operated) Part Number TM23P-88P/CK-MP(01) CL No. CL902-2130-3(01) ■Recommended Cable Specification Solid copper conductor: Jacket Filler Conductor Conductor 0.5mm dia. Stranded copper conductor: AWG#24 Individual conductor insulation dia. Insulation (0.95mm to 1.05mm) Overall jacket dia. (5.4mm to 6.8mm) Note: To achieve CAT 6 performance, refer to TM23P-88P Cable Termination Procedure Manual(ETAD-E2415). 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, orWiring System Connectorsthe products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. TM23 Series●CAT 6 Data will be discontinued soon. Please check ■Jacks BOverview . Unique contact structure designed for crosstalk reduction. . (Through hole : 3 rows) . Temporary retention to board with integral flexible posts. BPCB mounting pattern 15 13 7.112 5.08 3.048 1.016 14.5 8-Ø0.8 2.54 15 2-Ø2.4 8 7 5 4 2 1 4 Connector front edge 1.3 Contact No. 8 15 Contact No. 1 3 0.43 0.35 2.1 Flexible post 6 3 6 6 1.3 Recommended board thickness: 1.6mm Part Number TM23R-5A-88(50) 2.54 4 CL No. 222-2918-1-50 Color Black RoHS YES Note: The jack by itself does not clear CAT 6 performance requirements. Compensation on the board is required to secure CAT 6 performance. 6 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS TM23at www.hirose-connectors.com, or contact your Hirose sales representative. search Series●CAT 6 Data Wiring System Connectors ■ Precautions in System Construction The TM23 Series connector and components were designed for CAT 6 data transfer. However, it is highly recommended that the entire connected system be checked for this performance level. ● Cable termination procedures Cable termination procedure manual No. ETAD-E2415 Part Number TM23P-88P ● Recommended Cable Manufacturers Hirose Electric closely examines the transfer performance of these connectors with the CAT 6 cable that is manufactured and sold by the various cable manufacturers. Please use the cable from among those indicated in Table 1 for system construction with the TM23 Series. Manufacturer's Name Hitachi Cable, Ltd. Tonichi Kyosan Cable, Ltd. NipponSeisen Co. Ltd. Okano Electric Wire Co., Ltd. Tsushin Kogyo K.K. Showa Electric Wire & Cable Co., Ltd. Fuji Electric Cable Co, Ltd. Table1 Recommended Cable Manufacturers Web Site http://www.hitachi-cable.co.jp/index_e.html http://www.tonichi-kyosan.co.jp/ http://www.nscable.co.jp/ http://www.okano-cable.co.jp/english/index.html http://www.tsuko.co.jp/ http://www.swcc.co.jp/eng/index.html http://www.tokyo-fuji.co.jp/index_f.htm Note: Please see the web sites of the various manufacturers for cable specifications. Contact HRS for recommendations when using cables from other suppliers. ● Use of Different Manufacturers' Components Use of different manufacturers' components in one system could cause the deterioration of transfer performance. ● Check of the System Performance Verification All measures have been taken to assure the transfer performance of the TM23 series. However, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. Hirose Electric does not build wiring systems. Please contact Hirose Electric sales representative for system construction contractor information. 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, orWiring System Connectorsthe products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. TM23 Series●CAT 6 Data will be discontinued soon. Please check ■ Technical Documentation ● CAT 6 Transmission Characteristics Data . Permanent Links Horizontal cable 90 m This is representative transfer performance for the TM23 Series. A high margin is used for CAT 6 standard values. Permanent Link PSACR 100 90 Attenuation/PSNEXT (dB) 80 70 60 50 40 30 20 10 0 TM23R-MPP24 TM23R-T01 Measured value CAT 6 PSNEXT standard value Permanent link adapter (PM06) CAT 6 Attenuation standard value 1 10 Measured value 100 1000 DSP4300 Main unit DSP4300 Remote unit Frequency (MHz) . Channel Links Horizontal cable 90 m 100 90 Channel Link PSACR Attenuation/PSNEXT (dB) TM23R-MPP24 TM23R-T01 Patch cable Stranded 5m wire 3 m ( :TM23P-88P) Channel link adapter 80 70 60 50 40 30 20 10 0 Measured value Patch cable 2m CAT 6 PSNEXT standard value CAT 6 Attenuation standard value 1 10 Measured value 100 1000 DSP4300 Main unit DSP4300 Remote unit Frequency (MHz) . Patch Cable Patch Cable 2 m DSP4300 Main unit Patch Cable 2 m NEXT 120 100 Channel link adapter DSP4300 Remote unit Patch Cable 2 m RL 60 50 Measured value Measured value 40 NEXT(dB) 80 60 CAT 6 NEXT standard value RL(dB) 30 20 CAT CAT 6 RL standard value 40 20 0 10 0 1 10 100 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) ® 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 8 The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.