U.FL-LP-04N1T-A-L

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated height comparison (with E.FL series) U.FL-LP-040 U.FL-LP-066 1.9(2.0Max) 2.4(2.5Max) U.FL-LP(V)-040 E.FL-LP-040 E.FL-LP-066 3(3.2Max) E.FL U.FL sFeatures 1. Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm) 2. Small mounting area The receptacle occupies an area of 7.7mm2. qSpace Factor of Mated Connector Plug 2.5Max U.FL-LP-040 Cable 3. Light weight Receptacle: 15.7mg Dia.0.81 4. Accepts high frequency transmission. To meet the frequency requirements of a wide variety of miniature devices, the connectors offer high frequency performance from DC to 6GHz, with a V.S.W.R. of 1.3 to 1.5 max. Packaged on tape-and-reel the receptacles can be placed with vacuum nozzles of the automatic placement equipment. U.FL-R-SMT-1 Receptacle Cable Plug 2.5Max U.FL-LP-066 Dia.1.32 Dia.1.13 U.FL-R-SMT-1 Receptacle 5. Automatic board placement 6. Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated) cable 2.0Max Standard ultra-fine coaxial cable of 0.81mm diameter (single braid shielding) is used for the plug termination, assuring secure and stable connections. Plug U.FL-LP(V)-040 Cable Dia.0.81 7. Simple connector mating / unmating Use of available extraction tool assures correct disconnection of the plug and receptacle. U.FL-R-SMT-1 Receptacle 8. Verification of the fully mated condition 2.4Max Tactile click sensation confirms fully mated condition, assuring complete electrical and mechanical connection. Plug U.FL-LP-062 Cable Dia.1.00 sApplications Cellular phones, PHS, mobile phones, wireless communication devices, electronic measuring instruments, GPS, wireless LAN, Bluetooth and any application requiring high frequency transmission using small coaxial connectors. U.FL-R-SMT-1 Receptacle Plug 2.4Max U.FL-LP-088 Cable Dia.1.37 U.FL-R-SMT-1 Receptacle 2009.2w 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have qUltra Small or will be discontinued soon. Please Connectors - 1.9mm the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. U.FL Series been discontinued, Surface Mount Coaxial check the products status on or 2.4mm Mated Height sProduct Specifications Ratings Nominal characteristic impedance 50 ohms Frequency range DC to 6GHz Operating temperature range Operating humidity -40˚C to +90˚C 90%RH max. Storage temperature range -30˚C to +70˚C Storage humidity 90%RH max. Item 1. Contact resistance Specification Center : 20 m ohms max. Outer : 10 m ohms max. 10 mA max. 100 V DC 200 V AC / 1 minute Up to 3GHz 1.3 Max 1.3 Max 1.3 Max 1.3 Max 1.3 Max 1.3 Max Conditions 2. Insulation resistance 3. Withstanding voltage 4. V.S.W.R.* 500 M ohms min. No flashover or insulation breakdown. Part No. U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly U.FL-LP-066 dia.1.13mm Coaxial Cable Assembly U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly U.FL-LP-062 dia.1mm Coaxial Cable Assembly U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly 3 to 6GHz 1.35 Max 1.3 Max 1.4 Max 1.5 Max 1.3 Max 1.4 Max 5. Durability (mating / un-mating, with corresponding plug) 6. Vibration Contact resistance Center : 25 m ohms max. Outer : 15 m ohms max. Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration No electrical discontinuity of 1µs min. of 59m/s2, for 5 cycles in the direction of each of the 3 axis. Acceleration of 735 m/s2, 11ms duration, sine half-wave waveform, 3 cycles in each of 3 axes. 30 cycles 7. Shock No damage, cracks or parts dislocation. 8. Humidity (Steady state) No damage, cracks or parts dislocation. Insulation resistance 10 M ohms min.(humidity high) Insulation resistance 500 M ohms min.(dry) 96 hours at temperature of 40ç and humidity of 95%. 9. Temperature cycle No damage, cracks or parts dislocation. Contact resistance: 25 m ohms max. (Center) 15 m ohms max. (Outer) Temperature: -40˚C/+5 to +35˚C/+90˚C/+5 to +35˚C Time: 5 cycles 5% salt water solution, 48 hours 30min. / 3min. /30min./ 3min. 10. Salt spray No excessive corrosion *V.S.W.R. Measurement System The above V.S.W.R. standard values were measured using the measurement connection shown below. Note 1: Cable type connectors were measured with SMA conversion adapters attached to both ends of the harness product of a suitable 100cm cable. Note 2: Board type connectors were mounted to a 50Ω glass epoxy board and measurements were conducted with SMA conversion adapters attached. sMaterial / Finishes Part Shell Male center contact Female center contact Insulator Plug Receptacle Material Phosphor bronze Brass Phosphor bronze PBT LCP Finish Silver plated Gold plated Gold plated Color: Black Color: Beige Remarks ————— ————— ————— UL94V-0 UL94V-0 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Surface Mountsearch at www.hirose-connectors.com, or contact your Hirose sales Height U.FL SeriesqUltra Small Hirose website RoHS Coaxial Connectors - 1.9mm or 2.4mm Mated representative. sReceptacles Note 1: Receptacles of (01) specification are sold by the bag with 100 pieces per bag. Please order in pack units. Note 2: Receptacles of (10) specification are sold by the reel (which contains 2,500 pieces). Please order in reel units. Note 3: Receptacles of (40) specification are sold by the reel (Which contains 4,000 pieces) Note 4: This area may be covered by insulating material. GND SIG Ø2 1.25 GND BRecommended PCB Mounting Pattern No conductive traces in this area 4±0.05 1.9±0.05 2.2±0.05 GND SIG 1±0.05 GND 1±0.05 1.05±0.05 3 2.6 0.6 (3.1) 2.6 1.8 U.FL-R-SMT-1 1.2Max(Note 4) 0.35 Part No. U.FL-R-SMT-1(01) U.FL-R-SMT-1(10) U.FL-R-SMT-1(40) CL No. 331-0472-2-01 331-0472-2-10 331-0472-2-40 Packaging Bag packaging (100 pieces/bag) Reel packaging (2,500 pieces/reel) Reel packaging (4,000 pieces/reel) Weight / EA RoHS 15.7/mg YES qPackaging Specifications Embossed Carrier Tape Dimensions 1.75±0.1 Reel Dimensions 1.8 14 Ø1 .5 1 0. +0 2±0.1 4±0.1 Center contact 0.3 Ø13 5.5±0.1 Ø21 12±0.3 8±0.1 Unreeling direction 1.6 Ø330±2 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have qUltra Small or will be discontinued soon. Please Connectors - 1.9mm the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. U.FL Series been discontinued, Surface Mount Coaxial check the products status on or 2.4mm Mated Height sCable Assembly (Plug) U.FL-LP-040 U.FL-LP-066 U.FL-LP(V)-040 U.FL-LP-062 U.FL-LP-088 2.8 2.8 3 Part No. 4 1.93 1.93 4 1.5 3.4 1.8 3 4 1.85 3 5 Mated Height 2.5mm Max. (2.4mm Nom.) Dia. 0.81mm Coaxial cable 53.7 2.5mm Max. (2.4mm Nom.) Dia. 1.13mm and Dia. 1.32mm Coaxial cable 59.1 2.0mm Max. (1.9mm Nom.) Dia. 0.81mm Coaxial cable 34.8 YES 2.4mm Max. (2.3mm Nom.) Dia. 1mm Coaxial cable 45.5 2.4mm Max. (2.3mm Nom.) Dia. 1.37mm Coaxial cable 71.7 Applicable cable Weight (mg) RoHS qCable Guide Description Cable Type Inner Conductor 7/0.05 SA (AWG36) 7/0.08 SA (AWG32) 7/0.08 SA (AWG32) 7/0.071 SA (AWG33) 7/0.102 SA (AWG30) * Cable Specification Dielectric Diameter Dia.0.40 PFA Dia.0.68 FEP Dia.0.66 FEP Dia.0.62 FEP Dia.0.88 FEP Outer Conductor Single Shield TA[SA] Single Shield TA[SA] Double Shield TA Tape, single Shield TAT Single Shield TA * Jacket Diameter Dia.0.81 PFA Dia.1.13 FEP Dia.1.32 FEP Dia.1 FEP Dia.1.37 FEP Nominal Impedance 50 ohms Nominal attenuation At 3GHz 6.52dB/m [6.45dB/m] 3.73dB/m [3.43dB/m] 3.8dB/m At 6GHz 9.52dB/m [9.42dB/m] 5.44dB/m [5.13dB/m] 5.6dB/m Dia.0.81mm Coaxial Cable Dia.1.13mm Coaxial Cable Dia.1.32mm Coaxial Cable Dia.1mm Coaxial Cable Dia.1.37mm Coaxial Cable 04 068 50 ohms 066 50 ohms 062 50 ohms 3.1dB/m 4.4dB/m 088 50 ohms 2.8dB/m 4.3dB/m (data as provided by cable suppliers, for reference only) * SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Surface Mountsearch at www.hirose-connectors.com, or contact your Hirose sales Height U.FL SeriesqUltra Small Hirose website RoHS Coaxial Connectors - 1.9mm or 2.4mm Mated representative. sHow to Specify Plug Cable Assembly Double-Ended Cable Assembly L Single-Ended Cable Assembly L qOrdering Information qStandard Tolerances for (L) L L=35 to 200mm L=200 to 500mm L=500 to 1000mm L=Longer than 1000mm Standard Tolerance ±04mm ±08mm ±12mm ±1.5% of (L) U.FL - [] LP - [] - A - (L) 1 1 Series name 2 Assembly type 3 Cable type 2 U.FL LP: Single ended 2LP: Double ended 04 : Dia.0.81mm Coaxial Cable 068 : Dia.1.13mm Coaxial Cable 066 : Dia.1.32mm Coaxial Cable 062 : Dia.1 mm Coaxial Cable 088 : Dia.1.37mm Coaxial Cable Length(L) 3 4 Note1: Minimum available length (L) is 35mm Note2: Contact nearest HRS representative if different tolerances are required. Note3: Contact Nearest HRS representative if one end requires preparation. 4 Total length(mm) Part No. of Plug Part No. of Cable Assembly U.FL-2LP-04N1T-A-(L) U.FL-2LP-04N2T-A-(L) U.FL-LP-04N1T-A-(L) U.FL-LP-04N2T-A-(L) U.FL-2LP-068N1T-A-(L) Description Dia. 0.81mm double ended coaxial cable, color: white Dia. 0.81mm double ended coaxial cable, color: black Dia. 0.81mm single ended coaxial cable, color: white Dia. 0.81mm single ended coaxial cable, color: black Dia. 1.13mm double ended coaxial cable, color: gray Dia. 1.13mm double ended coaxial cable, color: black Dia. 1.13mm single ended coaxial cable, color: gray Dia. 1.13mm single ended coaxial cable, color: black Dia. 1.32mm double ended coaxial cable, color: gray Dia. 1.32mm double ended coaxial cable, color: black Dia. 1.32mm single ended coaxial cable, color: gray Dia. 1.32mm single ended coaxial cable, color: black Dia. 0.81mm double ended coaxial cable, color: white Dia. 0.81mm double ended coaxial cable, color: black Dia. 0.81mm single ended coaxial cable, color: white Dia. 0.81mm single ended coaxial cable, color: black Dia. 1mm double ended coaxial cable, color: gray Dia. 1mm double ended coaxial cable, color: black Dia. 1mm single ended coaxial cable, color: gray Dia. 1mm single ended coaxial cable, color: black Dia. 1.37mm double ended coaxial cable, color: gray Dia. 1.37mm double ended coaxial cable, color: black Dia. 1.37mm single ended coaxial cable, color: gray Dia. 1.37mm single ended coaxial cable, color: black RoHS U.FL-LP-040 U.FL-LP-066 U.FL-2LP-068N2T-A-(L) U.FL-LP-068N1T-A-(L) U.FL-LP-068N2T-A-(L) U.FL-2LP-066N1-A-(L) U.FL-LP-066 U.FL-2LP-066N2-A-(L) U.FL-LP-066N1-A-(L) U.FL-LP-066N2-A-(L) U.FL-2LP(V)-04N1T-A-(L) YES U.FL-LP(V)-040 U.FL-2LP(V)-04N2T-A-(L) U.FL-LP(V)-04N1T-A-(L) U.FL-LP(V)-04N2T-A-(L) U.FL-2LP-062N1D-A-(L) U.FL-LP-062 U.FL-2LP-062N2D-A-(L) U.FL-LP-062N1D-A-(L) U.FL-LP-062N2D-A-(L) U.FL-2LP-088N1T-A-(L) U.FL-LP-088 U.FL-2LP-088N2T-A-(L) U.FL-LP-088N1T-A-(L) U.FL-LP-088N2T-A-(L) Please contact Hirose Sales Representative for cable length and cable end treatment. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have qUltra Small or will be discontinued soon. Please Connectors - 1.9mm the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. U.FL Series been discontinued, Surface Mount Coaxial check the products status on or 2.4mm Mated Height sConversion Adapters qSMA Conversion Adapter (Mating portion: U.FL side jack - SMA side plug) (10.7) 8HEX Note: The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. Part No. HRMP-U.FLJ(40) 14.05 (4.05) CL No. 311-0300-2-40 RoHS YES qSMA Conversion Adapter (Mating portion: U.FL side plug - SMA side jack) 6 5.6 1/4-36UNS-2A Part No. Note: The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. HRMJ-U.FLP(40) (18.6) (4) CL No. 311-0301-5-40 Ø6.35 RoHS YES qSMA Conversion Adapter (Mating portion: U.FL side plug - SMA side jack) 6 5.5 1/4-36UNS-2A Part No. Note: This connector is used by compressing the mated portion of U.FL side onto the U.FL-R-SMT-1 portion. HRMJ-U.FLP-ST1(40) 12.9 (7.9) (4.4) 5 1 CL No. 311-0385-5-40 RoHS YES sReceptacle to Inspection 7HEX M5∞0.5 This receptacle is used for inspecting the continuity, withstand voltage, and other aspects of the harness product. Part No. U.FL-R-1 CL No. 331-0466-0 (90) RoHS YES sPlug Extraction Tool This jig is used for extraction from a mating condition. 50 5 U.FL Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088. Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062. 2.1 Part No. U.FL-LP-N-2 U.FL-LP(V)-N-2 CL No. 331-0494-5 331-0493-2 RoHS YES 6 Ø15 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Surface Mountsearch at www.hirose-connectors.com, or contact your Hirose sales Height U.FL SeriesqUltra Small Hirose website RoHS Coaxial Connectors - 1.9mm or 2.4mm Mated representative. sUsage Precautions 1. Plugs 1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges and pull off vertically, in the direction of the connector mating axis. 2) To mate the connectors, the mating axes of both connectors must be Extraction Jig aligned and the connectors can be mated. The "click" will confirm fully U.FL Cable mated connection.Do not attempt to insert on an extreme angle. Assembly (1) Mating / unmating U.FL-R-SMT-1 After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram below. U.FL-LP Cable Assembly 1N max (U.FL-LP(V)-040, U.FL-LP-062) 2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088) (2) Pull forces on the cable after connectors are mated. U.FL-R-SMT-1 3N max (U.FL-LP(V)-040, U.FL-LP-062) 4N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088) 1N max (U.FL-LP(V)-040, U.FL-LP-062) 2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088) (3) Precautions Do NOT forcefully twist or deform wires. 2. Receptacles [ç] 260 240 220 200 180 160 140 120 100 80 250 ç max. for 10 seconds 230ç 220ç (1) Recommended reflow temperature profile Preheat (130 to 180ç) 120 seconds max. 50 seconds max. 60 seconds max. q The temperature of the printed circuit board surface temperature at the points of contact with the terminals. w Reflow soldering should be performed at a printed circuit surface temperature of 250°C max. e In individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and board size / thickness. Consuly your solder paste and equipment manufacturer for specific recommendations. Time (2) Recommended manual soldering (3) Recommended metal mask thickness (4) Reflow cycles Manual soldering: 350˚C for 5 seconds 0.1 to 0.12 mm 2 times 3. Operating environment and storage conditions (1) Operating environment The connectors are not designed to operate in the following environments: • Exposed to a excessive amounts of fine particles and dust • Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses. • Environments having large rapid variations in temperature. Store in the Hirose Electric packaging. Temperature: -10 to +40ç, Humidity: 85% max. Use within 6 months of delivery. Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface. (2) Storage conditions Receptacle 7