HAT2037T

HAT2037T Silicon N Channel Power MOS FET High Speed Power Switching ADE-208-530 D (Z) 5th. Edition February 1999 Features • • • • Low on-resistance Capable of 2.5 V gate drive Low drive current High density mounting Outline TSSOP–8 65 34 87 12 158 DDD 4 G SSSS 2367 1, 5, 8 Drain 2, 3, 6, 7 Source 4 Gate HAT2037T Absolute Maximum Ratings (Ta = 25°C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Channel dissipation Channel temperature Storage temperature Note: Symbol VDSS VGSS ID I D(pulse) I DR Pch Tch Tstg Note2 Note1 Ratings 28 ±12 5.5 44 5.5 1.3 150 –55 to +150 Unit V V A A A W °C °C 1. PW ≤ 10 µs, duty cycle ≤ 1 % 2. When using the glass epoxy board (FR4 40 x 40 x 1.6 mm), PW ≤ 10s Electrical Characteristics (Ta = 25°C) Item Symbol Min 28 ±12 — — 0.4 — — 9 — — — — — — — — — Typ — — — — — 0.021 0.027 14 780 470 190 20 130 155 160 0.81 55 Max — — ±10 1 1.4 0.028 0.038 — — — — — — — — 1.06 — Unit V V µA µA V Ω Ω S pF pF pF ns ns ns ns V ns IF =5.5A, VGS = 0 Note3 IF = 5.5A, VGS = 0 diF/ dt =20A/µs Test Conditions I D = 10mA, VGS = 0 I G = ±100µA, VDS = 0 VGS = ±10V, VDS = 0 VDS = 28 V, VGS = 0 VDS = 10V, I D = 1mA I D = 3A, VGS = 4V Note3 I D = 3A, VGS = 2.5V Note3 I D = 3A, VDS = 10V Note3 VDS = 10V VGS = 0 f = 1MHz VGS = 4V, ID = 3A VDD ≈ 10V Drain to source breakdown voltage V(BR)DSS Gate to source breakdown voltage V(BR)GSS Gate to source leak current Zero gate voltege drain current Gate to source cutoff voltage Static drain to source on state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Body–drain diode forward voltage Body–drain diode reverse recovery time Note: 3. Pulse test I GSS I DSS VGS(off) RDS(on) RDS(on) |yfs| Ciss Coss Crss t d(on) tr t d(off) tf VDF t rr 2 HAT2037T Main Characteristics Power vs. Temperature Derating 2.0 Pch (W) I D (A) 100 30 10 3 Maximum Safe Operation Area 10 µs 100 µs Test Condition : When using the glass epoxy board (FR4 40x40x1.6 mm), PW < 10 s 1.5 DC PW Op er at ion 1 m = s Channel Dissipation Drain Current 10 m 1.0 1 0.3 0.1 0.03 s 0.5 PW Operation in < Note 10 4 this area is s) limited by R DS(on) ( Ta = 25 °C 0 50 100 150 Ta (°C) 200 Ambient Temperature 0.01 1 shot Pulse 0.1 0.3 1 3 10 30 100 Drain to Source Voltage V DS (V) Note 4 : When using the glass epoxy board (FR4 40x40x1.6 mm) Typical Output Characteristics 50 10V 5V 4V 2.5 V 50 3V I D (A) Typical Transfer Characteristics –25°C 25°C Tc = 75°C I D (A) 40 40 30 30 Drain Current 20 VGS = 1.5 V 10 Pulse Test 0 2 4 6 Drain to Source Voltage 8 10 V DS (V) Drain Current 20 10 V DS = 10 V Pulse Test 0 1 2 3 Gate to Source Voltage 5 4 V GS (V) 3 HAT2037T Drain to Source Saturation Voltage vs. Gate to Source Voltage Static Drain to Source on State Resistance vs. Drain Current V DS(on) (V) Pulse Test Drain to Source On State Resistance R DS(on) ( W) 0.25 0.2 Pulse Test 0.1 0.05 0.20 Drain to Source Voltage 0.15 ID=5A 2.5 V 0.02 0.10 VGS = 4 V 0.01 0.05 2A 1A 2 4 6 Gate to Source Voltage 8 V GS (V) 10 0.005 0.002 0 0.2 0.5 1 2 Drain Current 5 10 I D (A) 20 Static Drain to Source on State Resistance R DS(on) (mW) Forward Transfer Admittance |yfs| (S) Static Drain to Source on State Resistance vs. Temperature 50 I D= 5 A 2 A 1 A 50 Forward Transfer Admittance vs. Drain Current Tc = –25 °C 40 VGS = 2.5 V 20 10 5 2 1 0.5 0.2 V DS = 10 V Pulse Test 0.5 1 2 5 10 20 75 °C 25 °C 30 20 4V 10 5, 2, 1 A Pulse Test 0 –40 0 40 80 120 160 Case Temperature Tc (°C) Drain Current I D (A) 4 HAT2037T Body–Drain Diode Reverse Recovery Time Typical Capacitance vs. Drain to Source Voltage VGS = 0 f = 1 MHz 500 Reverse Recovery Time trr (ns) 10000 3000 1000 300 100 30 10 10 0 100 50 Capacitance C (pF) 200 Ciss Coss Crss 20 10 5 0.1 di/dt = 20 A/µs V GS = 0, Ta = 25°C 0.2 0.5 1 2 Reverse Drain Current 5 I DR (A) 10 20 30 40 50 Drain to Source Voltage V DS (V) Dynamic Input Characteristics V DS (V) Switching Characteristics V GS (V) 50 I D = 5.5 A 40 V DD = 5 V 10 V 25 V V GS V DD = 25 V 10 V 5V 4 8 12 16 Gate Charge Qg (nc) 10 1000 500 Switching Time t (ns) V GS = 4 V, V DD = 10 V PW = 3 µs, duty < 1 % t d(off) tf tr t d(on) 8 Drain to Source Voltage 30 V DS 20 6 Gate to Source Voltage 200 100 50 4 10 2 0 20 20 10 0.1 0 0.2 0.5 1 Drain Current 2 5 I D (A) 10 5 HAT2037T Reverse Drain Current vs. Souece to Drain Voltage 50 Pulse Test Reverse Drain Current I DR (A) 40 30 20 5V V GS = 0 V 10 0 0.4 0.8 1.2 1.6 2.0 Source to Drain Voltage V SD (V) Normalized Transient Thermal Impedance vs. Pulse Width 10 Normalized Transient Thermal Impedance γ s (t) 1 D=1 0.5 0.1 0.2 0.1 0.05 0.01 0.02 0.01 θ ch – f(t) = γ s (t) • θ ch – f θ ch – f = 139 °C/W, Ta = 25 °C When using the glass epoxy board (FR4 40x40x1.6 mm) ls pu e PDM PW T 0.001 1s ho t D= PW T 0.0001 10 µ 100 µ 1m 10 m 100 m 1 10 100 1000 10000 Pulse Width PW (S) 6 HAT2037T Switching Time Test Circuit Vin Monitor D.U.T. RL Vin Vin 4V 50 W V DD = 10 V Vout 10% 10% 90% td(on) tr 90% td(off) tf 10% Vout Monitor Switching Time Waveform 90% 7 HAT2037T Package Dimensions Unit: mm 3.00 ± 0.1 4.40 ± 0.1 8 5 1 4 1.10 Max 6.40 ± 0.20 0.17 ± 0.05 +0.03 –0.04 0.65 0.10 0.22 +0.08 –0.07 0–8° 0.07 0.50 ± 0.10 0.13 M Hitachi code EIAJ JEDEC TTP–8D — — 8 HAT2037T Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & IC Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 2000 Sierra Point Parkway Brisbane, CA 94005-1897 Tel: (800) 285-1601 Fax: (303) 297-0447 Hitachi Europe GmbH Electronic components Group Dornacher Straße 3 D-85622 Feldkirchen, Munich Germany Tel: (89) 9 9180-0 Fax: (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: (1628) 585000 Fax: (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: (2) 2718-3666 Fax: (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: (2) 735 9218 Fax: (2) 730 0281 Telex: 40815 HITEC HX Copyright © Hitachi, Ltd., 1998. All rights reserved. Printed in Japan. 9