HAT2042T
Silicon N Channel Power MOS FET High Speed Power Switching
ADE-208-669F (Z) 7th. Edition February 1999 Features
• • • • Low on-resistance Capable of 2.5 V gate drive Low drive current High density mounting
Outline
TSSOP–8
65 34
87
1 D
8 D
12
4 G
5 G
SS 23
SS 67
MOS1
MOS2
1, 8 Drain 2, 3, 6, 7 Source 4, 5 Gate
HAT2042T
Absolute Maximum Ratings (Ta = 25°C)
Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Channel dissipation Channel dissipation Channel temperature Storage temperature Note: Symbol VDSS VGSS ID I D(pulse) I DR Pch Pch Tch Tstg
Note2 Note3 Note1
Ratings 28 ± 12 5.0 40 5.0 1.0 1.5 150 – 55 to + 150
Unit V V A A A W W °C °C
1. PW ≤ 10 µs, duty cycle ≤ 1% 2. 1 Drive operation ; When using the glass epoxy board (FR4 40 x 40 x 1.6 mm), PW ≤ 10 s 3. 2 Drive operation ; When using the glass epoxy board (FR4 40 x 40 x 1.6 mm), PW ≤ 10 s
Electrical Characteristics (Ta = 25°C)
Item Symbol Min 28 — — 0.4 — — 7 — — — — — — — — — — — — Typ — — — — 0.027 0.037 11 510 190 140 8.5 4.5 4 14 120 85 120 0.85 40 Max — ± 0.1 1 1.4 0.034 0.044 — — — — — — — — — — — 1.1 — Unit V µA µA V Ω Ω S pF pF pF nc nc nc ns ns ns ns V ns IF = 5.0 A, VGS = 0 Note4 IF = 5.0 A, VGS = 0 diF/ dt = 20 A/ µs Test Conditions I D = 10mA, VGS = 0 VGS = ± 12 V, VDS = 0 VDS = 28 V, VGS = 0 VDS = 10 V, I D = 1 mA I D = 3 A, VGS = 4 V Note4 I D = 3 A, VGS = 2.5 V Note4 I D = 3 A, VDS = 10 V Note4 VDS = 10 V VGS = 0 f = 1 MHz VDD = 10 V VGS = 4 V ID = 5 A VGS = 4 V, ID = 3 A VDD ≅ 10 V Drain to source breakdown voltage V(BR)DSS Gate to source leak current Zero gate voltege drain current Gate to source cutoff voltage Static drain to source on state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate to source charge Gate to drain charge Turn-on delay time Rise time Turn-off delay time Fall time Body–drain diode forward voltage Body–drain diode reverse recovery time Note: 4. Pulse test I GSS I DSS VGS(off) RDS(on) RDS(on) |yfs| Ciss Coss Crss Qg Qgs Qgd t d(on) tr t d(off) tf VDF t rr
2
HAT2042T
Main Characteristics
Power vs. Temperature Derating 2.0 Pch (W) I D (A) Test Condition : When using the glass epoxy board (FR4 40x40x1.6 mm), PW < 10 s 1.5 Maximum Safe Operation Area
10 µs
100 30 10 3
100 µs
DC
Channel Dissipation
Drain Current
Op
PW
er at ion (P
1
m
s
=
1.0
1 Dr ive
1 0.3 0.1 0.03
10
2
m
s
0.5
Op
ive Dr e Op ra tio n
Operation in this area is limited by R DS(on) Ta = 25 °C 1 shot Pulse
W
< Note 1 0
s) 5
er
at
ion
0
50
100
150 Ta (°C)
200
Ambient Temperature
0.01 0.1 0.3 1 3 10 30 100 Drain to Source Voltage V DS (V) Note 5 : When using the glass epoxy board (FR4 40x40x1.6 mm)
Typical Output Characteristics 10 10V I D (A) 8 4V 6 1.5 V Pulse Test I D (A) 10
Typical Transfer Characteristics
8
Drain Current
Drain Current
6 –25°C 25°C 2 Tc = 75°C V DS = 10 V Pulse Test 0 1 2 3 Gate to Source Voltage 5 4 V GS (V)
4
4
2 VGS = 1.0 V 0 1 2 3 Drain to Source Voltage 4 5 V DS (V)
3
HAT2042T
Drain to Source Saturation Voltage vs. Gate to Source Voltage
V DS(on) (V)
Static Drain to Source on State Resistance vs. Drain Current
Drain to Source On State Resistance R DS(on) ( Ω)
0.2
0.25
Pulse Test
Pulse Test
0.1 0.05
0.20
2.5 V
Drain to Source Voltage
0.15
0.02
0.10
ID=5A
VGS = 4 V
0.01
0.05
2A 1A
0.005
0.002
0
2 4 6 Gate to Source Voltage
8 V GS (V)
10
0.2
0.5 1 2 Drain Current
5 10 I D (A)
20
Static Drain to Source on State Resistance R DS(on) (mΩ )
Forward Transfer Admittance |yfs| (S)
Static Drain to Source on State Resistance vs. Temperature 100
50
Forward Transfer Admittance vs. Drain Current
80 I D= 5 A VGS = 2.5 V 40 2A
1A
20 10 5
Tc = –25 °C
60
75 °C 25 °C
5, 2, 1 A 20 0 –40 4V Pulse Test 0 40 80 120 160 Case Temperature Tc (°C)
2 1 0.5 0.2 V DS = 10 V Pulse Test 0.5 1 2 5 10 20
Drain Current I D (A)
4
HAT2042T
Body–Drain Diode Reverse Recovery Time Typical Capacitance vs. Drain to Source Voltage VGS = 0 f = 1 MHz
500
Reverse Recovery Time trr (ns)
10000 3000 1000
100 50
Capacitance C (pF)
200
Ciss 300 Coss 100 Crss 30 10
20 10 5 0.1 di/dt = 20 A/µs V GS = 0, Ta = 25°C 0.2 0.5 1 2 Reverse Drain Current 5 I DR (A) 10
0
10
20
30
40
50
Drain to Source Voltage V DS (V)
Dynamic Input Characteristics
V DS (V)
Switching Characteristics
V GS (V)
50 I D = 5.0 A 40 V DD = 5 V 10 V 25 V
10
1000 500
Switching Time t (ns)
V GS = 4 V, V DD = 10 V PW = 3 µs, duty < 1 %
8 V GS 6
Drain to Source Voltage
30 V DS 20
Gate to Source Voltage
200 100 50 tf tr t d(on) 0.2 0.5 1 Drain Current 2 5 I D (A) 10 t d(off)
4
10
V DD = 25 V 10 V 5V 4 8 12 16 Gate Charge Qg (nc)
2 0 20
20 10 0.1
0
5
HAT2042T
Reverse Drain Current vs. Souece to Drain Voltage 10 Pulse Test Reverse Drain Current I DR (A) 8
6 5V V GS = 0 V
4
2
0
0.4
0.8
1.2
1.6
2.0
Source to Drain Voltage
V SD (V)
Switching Time Test Circuit Vin Monitor D.U.T. RL Vin Vin 4V 50 Ω V DD = 10 V Vout Monitor
Switching Time Waveform 90% 10% 10% 90% td(on) tr 90% td(off) tf 10%
Vout
6
HAT2042T
Normalized Transient Thermal Impedance vs. Pulse Width ( 1 Drive Operation) 10 Normalized Transient Thermal Impedance γ s (t)
1
D=1 0.5
0.1
0.2
0.1 0.05
0.02 0.01
p ot uls e
0.01
θ ch – f(t) = γ s (t) • θ ch – f θ ch – f = 166 °C/W, Ta = 25 °C When using the glass epoxy board (FR4 40x40x1.6 mm)
PDM PW T
0.001
1
sh
D=
PW T
0.0001 10 µ
100 µ
1m
10 m
100 m
1
10
100
1000
10000
Pulse Width PW (S)
Normalized Transient Thermal Impedance vs. Pulse Width ( 2 Drive Operation) 10 Normalized Transient Thermal Impedance γ s (t)
1
D=1 0.5
0.1
0.2
0.1
0.05
0.01
0.02 0.01
θ ch – f(t) = γ s (t) • θ ch – f θ ch – f = 210 °C/W, Ta = 25 °C When using the glass epoxy board (FR4 40x40x1.6 mm)
e uls
PDM PW T
0.001
h 1s ot
D=
p
PW T
0.0001 10 µ
100 µ
1m
10 m
100 m 1 10 Pulse Width PW (S)
100
1000
10000
7
HAT2042T
Package Dimensions
Unit: mm
3.00 ± 0.1 4.40 ± 0.1 8 5
1
4 1.10 Max
6.40 ± 0.20
0.17 ± 0.05
0.07 +0.03 –0.04
0.65 0.10 0.22
+0.08 –0.07
0–8° 0.50 ± 0.10
0.13 M
Hitachi code EIAJ JEDEC
TTP–8D — —
8
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: (408) 433-1990 Fax: (408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: (89) 9 9180-0 Fax: (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: (1628) 585000 Fax: (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: (2) 2718-3666 Fax: (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: (2) 735 9218 Fax: (2) 730 0281 Telex: 40815 HITEC HX
Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.
