HASM10G-S240041

H HiTRON 2008/03/31 CHASSIS-MOUNT UNIVERSAL INPUT MEDICAL APPLICATION AC-DC GREEN POWER ENCAPSULATED MODULAR POWER SUPPLIES 10 WATTS MULTIPLE OUTPUT HASM10G-S &HASM10-D/T SERIES FEATURES: CHASSIS-MOUNT AC/DC MODULAR POWER SUPPLIES UNIVERSAL AC INPUT RANGE GREEN POWER DESIGN MEET MEDICAL STANDARD EN60601-1/UL60601-1 EMI MEETS CISPR PUB.22/FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: 90-264Vac typical. Input Frequency: 47-63 Hz. (Nominal 50/60Hz.). Input Current: 0.16A @115Vac./0.1A @230Vac typical. Inrush Current: 4.2Arms@230Vac typical. Input Fuse: Use external fuse. Dielectric Withstand: Meet IEC60601-1. 4,000Vac-Output/Input. 2,000Vac-Input/GND. 1,000Vac-Output/GND. EMI: Meet CISPR PUB. 22/FCC Class B. Hold-up time: Typ. 22.4 mS @115Vac, 130mS @230Vac. Green Power: 0.25W@132Vac, 0.51W@230Vac for single. Earth Leakage: Less than 0.16mA @230Vac. Remote ON/OFF: ON(Enable)=Open. OFF(Disable)=Short. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 10 Watts typical. Line Regulation: Various with output voltage. Typ.±0.1% . Load Regulation: Various with output voltage. Main VO1 ± 0.1-2.0% typical. Aux.VO2 ± 0.7-1.2% typical. Aux.VO3 ± 0.1% typical. Total Regulation: 0.1-1.9% typical. Noise & ripple: 1.0% typical peak to peak. Typ. 100mV for 3.3V/5V. OVP: Built-in on main output VO1. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. Typical 125-150% of rating output load. Con2sult the factory for special OLP setting. Operating Temperature: 0°C to +50°C range. @ full load without derating. From+50°C derating linearly to half load @+70°C (Refer to the Derating Chart). GENERAL SPECIFICATION Efficiency: 70-80% typical various with output voltage. Switching Frequency: 80K Hz. Circuit Topology: Fixed Frequency Flyback circuit. Transient Response: Peak deviation on 70mV, Recovery time