HEG42-190220-8

H HiTRON AC/DC EXTERNAL DESKTOP ADAPTER UNIVERSAL INPUT SINGLE OUTPUT 42 WATTS GREEN POWER SWITCHING POWER SUPPLIES HEG42 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT DESKTOP IEC320-3P /3PL/2P AC RECEPTACLE GREEN POWER MEET UNIVERSAL SAFETY STANDARDS EMI MEET EN55022 / FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: 90-264Vac typical. Input Connector: IEC320-3P DT7 or DT7L or 2P DT8 AC inlet receptacle. Input Frequency: 47-63Hz. Inrush Current: 8.0Arms @230Vac typical. Input Current: 0.63A @115Vac & 0.35A @230Vac typical. Dielectric Withstand: Meet IEC60950-1. EMI: Meet EN55022 / FCC Class B. Hold-up Time: 15.6mS @115Vac typical. 89.6mS @230Vac typical. Green Power: 0.157W@131Vac & 0.256W @ 264Vac Earth Leakage: Less than 0.17mA for class II or Less than 0.4mA for class I OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 42 Watt typical. Output Connector & Cord: Optional. Line Regulation: 0.5% typical. Load Regulation: ±3.0% typical. Tolerance: ±5%. Noise & Ripple: 1.0% typical peak to peak. OVP: Built-in, Latch. Overload Protection: Fully protected against output overload or short circuit. Typical set at 105-140% at 115Vac. Consult the factory for special OLP setting. GENERAL SPECIFICATION Efficiency: 87-88% typical. Switching Frequency: Approximate 59-63KHz. Circuit Topology: Fixed Frequency flyback circuit. Transient Response: Output voltage returns in less than 1mS following a 25% load change. Safety Standard: Meet UL60950-1/EN60950-1 Class I or II. Power Density: Typ. 3.3Watts / Cubic inch. Operating Temperature: 0 to +25/35/40°C without derating. (various with output voltage) Storage Temperature: -20 to +85°C. Temperature Coefficient: 0.04% /°C. Cooling: Free air convection. Construction: Impact resistant thermo-plastic case. Desktop Format. NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage indicate the change in output voltage as the load varied from half load to full load(±%) (3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires. (4) Due to requests in market and advances in technology, specifications subject to change without notice For the details of safety approval, please consult the factory. -29- OUTPUT VOLTAGE/CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HEG42-120400-7 HEG42-120400-8 HEG42-150280-7 HEG42-150280-8 HEG42-190220-7 HEG42-190220-8 HEG42-240100-7L HEG42-240150-7L HEG42-240200-7L HEG42-240200-7 HEG42-240200-8 AC PLUG DT7 DT8 DT7 DT8 DT7 DT8 DT7L DT7L DT7L DT7 DT8 O/P VOLTAGE 12.0Vdc 12.0Vdc 15.0Vdc 15.0Vdc 19.0Vdc 19.0Vdc 24.0Vdc 24.0Vdc 24.0Vdc 24.0Vdc 24.0Vdc O/P CURRENT 4.00A 4.00A 2.80A 2.80A 2.20A 2.20A 1.00A 1.50A 2.00A 2.00A 2.00A MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 320g(11.30Oz) -30-