HMI19-T050II

H HiTRON UNIVERSAL INPUT AC-DC MEDICAL APPLICATION OPEN FRAME SINGLE & MULTI-OUTPUT 19-20 WATTS INTERNAL SWITCHING POWER SUPPLIES HMI19 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES MEET MEDICAL STANDARD EN 60601-1/ UL 2601-1 EMI MEET EN 55011 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: 90-264Vac typical. Input Connector: Molex 5273 or equivalent. Input Frequency: 47-63Hz. Inrush Current: 16A @ 230Vac. Input Current: 0.4A@115Vac & 0.22A@230Vac. Dielectric Withstand: Meet IEC 60601-1. EMI: Meet EN55011 & FCC Class B. Hold-up Time: Typ. 14mS @ 115Vac. Typ. 70mS @ 230Vac. Earth Leakage: Less than 0.10 mA. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 19-20W. Output Connector: Molex 5273 or 41671. Line Regulation: Typ. 0.2-1.0%. Load Regulation: Main VO1 typ. ±1.0%. Aux. VO2 typ. ±2-3.0%(Stacked). Aux. VO3 typ. ±1-2.0%(P.R.). Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in at main output VO1. Adjustability: Factory set. Over Load Protection (OLP): Fully protected against overload or short circuit. Typ. 120-150% max. load. Consult the factory for special OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 73%. Switching Frequency: Typ. 67K Hz. Circuit Topology: Fixed-frequency Flyback Circuit. Transient Response: Output voltage returns in less than 0.2mS following a 25% load change. Safety standard: Meet Medical standards UL2601-1/ EN 60601-1 Class I. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: Free air convection. Construction: L-Bracket open frame format. Power Density: 3.3 Watts / Cubic Inch. Note: Due to requests in market and advances in technology, specifications subject to change without notification. In application -9- OUTPUT VOLTAGE/CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HMI19-S033050 HMI19-S050043 HMI19-S120017 HMI19-S240009 MAIN VO1@★ Typ. 5.0A 4.3A 1.7A 0.9A Volt. +3.3V +5.0V +12.0V +24.0V Max. 6.0A 5.0A 2.0A 1.0A DUAL OUTPUT MODEL NO. HMI19-D033I HMI19-D033M HMI19-D050M HMI19-D050I MAIN VO1@★ Typ. 4.0A 4.0A 4.0A 4.0A Volt, +3.3V +3.3V +5.0V +5.0V Max. 5.0A 5.0A 5.0A 5.0A AUX. VO2 † or ● Typ. Volt. Max. 0.3A +12V 0.6A 0.3A +24V 0.5A 0.3A +24V 0.5A 0.3A +12V 0.6A Pk. 1A 1A 1A 1A TRIPLE OUTPUT MODEL NO. HMI19-T033II HMI19-T033MI HMI19-T050II HMI19-T050MI HMI19-T050KK Symbol: "★" OVP built-in. MAIN VO1@★ Typ. 4.0A 4.0A 3.0A 3.0A 3.0A Volt. +3.3V +3.3V +5.0V +5.0V +5.0V Max. 5.0A 5.0A 4.0A 4.0A 4.0A Typ. AUX. VO2 † Volt. Max. Pk. 2A 1A 2A 1A 1A Typ. 0.5A +12V 1.0A 0.3A +24V 0.5A 0.5A +12V 1.0A 0.3A +24V 0.5A 0.4A +15V 0.8A AUX. VO3 ● Volt. Max. Pk. 1A 1A 1A 1A 1A 0.3A +12V 0.6A 0.3A +12V 0.6A 0.3A +12V 0.6A 0.3A +12V 0.6A 0.3A -15V 0.6A "@" Adjustable. "●" Installed with Post Regulator (P.R.). "†" Stacked-on main O/P. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 373.0g (13.2 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT SINGLE OUTPUT DUAL OUTPUT DC N/A VO1 VO2 N/A COM. P1-L P1-N P1-G P2-2 P2-3,4 P2-1 P2-2 P2-4 P2-3 CNTR & PIN # Mating connector: P1: Molex 5195 or 5239 series. P2: Molex 5195 or 5239 series/ 3069 series. ASSIGNMENT AC-L AC-N AC-G VO1 AC INPUT TRIPLE OUTPUT DC COM. P2-1 VO1 P2-2 VO2 P2-3 VO3 P2-4 DC COM. P2-1 -10-