HPD150-S120125

H HiTRON UNIVERSAL AC INPUT HARMONIC CORRECTION AC-DC INDUSTRIAL DIN- RAIL SINGLE OUTPUT 150 WATTS ACTIVE CURRENT SHARING SWITCHING MODE POWER SUPPLIES HPD150 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES IN THE WORLD MEET IEC 61000-3-2 HARMONIC CORRECTION MEET UNIVERSAL SAFETY STANDARDS AND INDUSTRIAL UL 508 INDUSTRIAL POWER SUPPLIES FOR SNAP-ON MOUNTING ON DIN-RAILS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac universal input. Input Connector: Phoenix GMSTBA2.5/3-G-7.62. Input Frequency: 47-63Hz. Inrush Current: Typ. 30A peak @ 230Vac. Input Current: 1.6A @ 115Vac, 0.8A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI/RFI: Meet CISPR EN 55022 & FCC B. Power Factor Correction: Meet Harmonic Correction per IEC 61000-3-2.PF typ.0.96-0.98. Remote Inhibit: Availabe. No Load Operation: No damage. Hold-up Time: 30mS @ 115Vac & 230Vac. Earth Leakage: Less than 0.40mA @ 230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 150W continuous. Output Connector: Phoenix MSTBA2.5/2-G-5.08. Line Regulation: Typ. 0.1%. Load Regulation: Typ. ± 1.0%. Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in. Remote Sense: Installed. Adjustability: Available. Load Sharing: Active current sharing. (Option) LED Indicator: Output indicating. Overload Protection (OLP): Fully protected against output overload and short circuit. Typically set at 115-130% of the output wattage. Consult the factory for the special OLP setting. Operating Temperature: -10 to +70°C. Derating from +60 to +70°C by derating 2%/°C. Storage Temperature: -25 to +85°C. Temperature Coefficient: Typ. 0.03% /°C. Cooling: Free air convection cooling for Ta + 60°C full load operation. Construction format: Enclosure metal box with DIN-clips format. GENERAL SPECIFICATION Efficiency: Typ. 83-86%. Switching Frequency: Fixed frequency 88-92KHz. Circuit Topology: Fixed freq. forward circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 2.4Watts /Cubic Inch. Industrial Grade UL 508. Note: Due to requests in market and advances in technology, specifications subject to change without notification.. In application -41- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HPD150-S120125 HPD150-S240065 HPD150-S480034 MAIN VO1 @ ★(≡)# TYP. 12.5A 6.5A 3.4A VOLT. 12.0V 24.0V 48.0V PEAK 15.0A 7.5A 4.0A Symbol: "(≡)" Active circuit current sharing. (Option) "★" OVP built-in. "#" Remote sensing. "@" Adjustable. Remark: Peak load less than 60sec. with duty cycle