187AMS8E

HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Features Conversion loss: 15 dB Fo, 3Fo, 4Fo isolation: 40 dB input Drive level: 10 to 20 dBm Typical Applications the HMC187AMs8(e) is ideal for: • Wireless local loop • lMDs, VsAt, and point-to-point radios • uNii & HiperlAN 5 Freq. Multipliers - pAssiVe - sMt • test equipment Functional Diagram * General Description the HMC187AMs8(e) is a miniature frequency doubler MMiC in plastic 8-lead MsOp package. the suppression of undesired fundamental and higher order harmonics is 40 dB typical with respect to input signal levels. the doubler uses the same diode/balun technology used in Hittite MMiC mixers. the doubler is ideal for high volume applications where frequency doubling of a lower frequency is more economical than directly generating a higher frequency. the passive schottky diode doubler technology contributes no measurable additive phase noise onto the multiplied signal. Electrical Specifications, TA = +25° C, As a Function of Drive Level input = +10 dBm parameter Frequency range, input Frequency range, Output Conversion loss FO isolation (with respect to input level) 3FO isolation (with respect to input level) 4FO isolation (with respect to input level) Min. typ. 1.25 - 1.75 2.5 - 3.5 18 22 35 42 30 Max. Min. input = +15 dBm typ. 1.0 - 1.75 2.0 - 3.5 14 45 46 40 17 Max. Min. input = +20 dBm typ. 0.85 - 2.0 1.7 - 4.0 15 18 Max. units GHz GHz dB dB dB dB * N/C denotes no internal connection, however, it is recommended to connect these pins to ground. 5-1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Isolation @ +15 dBm Drive Level* 0 -15 ISOLATION (dB) -30 -45 -60 -75 -90 1F0 3F0 4F0 Conversion Gain @ +15 dBm Drive Level 0 -5 CONVERSION GAIN (dB) -10 -15 -20 -25 -30 -35 1 2 3 4 5 6 OUTPUT FREQUENCY (GHz) +85 C +25 C -40 C 5 0 2 4 6 8 10 12 FREQUENCY (GHz) *With respect to input level Input Return Loss vs. Drive Level 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0.5 Output Return Loss for Several Input Frequencies 0 -5 RETURN LOSS (dB) -10 -15 2.50 GHz 1.75 GHz 1.00 GHz 17 dBm 15 dBm 13 dBm 10 dBm -20 -25 1 1.5 2 2.5 3 0 2 4 6 8 10 INPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 5-2 Freq. Multipliers - pAssiVe - sMt HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Output Return Loss with 1 GHz Input 0 Conversion Gain @ 25°C vs. Drive Level 0 -5 CONVERSION GAIN (dB) -10 -15 -20 -25 -30 20 dBm 17 dBm 15 dBm 13 dBm 11 dBm 9 dBm RETURN LOSS (dB) -5 5 Freq. Multipliers - pAssiVe - sMt -10 -15 17 dBm 15 dBm 10 dBm -35 1 2 3 4 5 6 OUTPUT FREQUENCY (GHz) -20 0 1 2 3 4 5 6 OUTPUT FREQUENCY (GHz) Conversion Gain @ -40 °C vs. Drive Level 0 -5 CONVERSION GAIN (dB) -10 -15 -20 -25 -30 -35 1 2 3 4 5 6 OUTPUT FREQUENCY (GHz) 20 dBm 17 dBm 15 dBm 13 dBm 11 dBm 9 dBm Output Return Loss with 1.75 GHz Input 0 RETURN LOSS (dB) -5 -10 -15 17 dBm 15 dBm 10 dBm -20 0 1 2 3 4 5 6 OUTPUT FREQUENCY (GHz) Conversion Gain @ +85°C vs. Drive Level 0 -5 CONVERSION GAIN (dB) -10 -15 -20 -25 -30 -35 1 2 3 4 5 6 OUTPUT FREQUENCY (GHz) 20 dBm 17 dBm 15 dBm 13 dBm 11 dBm 9 dBm Output Return Loss with 2.5 GHz Input 0 RETURN LOSS (dB) -5 -10 -15 17 dBm 15 dBm 10 dBm -20 0 1 2 3 4 5 6 OUTPUT FREQUENCY (GHz) 5-3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Absolute Maximum Ratings input Drive storage temperature Operating temperature +27 dBm -65 to +150 °C -40 to +85 °C eleCtrOstAtiC seNsitiVe DeViCe OBserVe HANDliNG preCAutiONs 5 Freq. Multipliers - pAssiVe - sMt 5-4 Outline Drawing NOtes: 1. leADFrAMe MAteriAl: COpper AllOY 2. DiMeNsiONs Are iN iNCHes [MilliMeters]. 3. DiMeNsiON DOes NOt iNCluDe MOlDFlAsH OF 0.15mm per siDe. 4. DiMeNsiON DOes NOt iNCluDe MOlDFlAsH OF 0.25mm per siDe. 5. All GrOuND leADs Must Be sOlDereD tO pCB rF GrOuND. Package Information part Number HMC187AMs8 HMC187AMs8e package Body Material low stress injection Molded plastic roHs-compliant low stress injection Molded plastic lead Finish sn/pb solder 100% matte sn Msl rating Msl1 Msl1 [1] package Marking [3] H187A XXXX H187A XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Pin Description pin Number 1, 4, 5, 8 Function N/C Description these pins are not connected internally; however, all data shown herein was measured with these pins connected to rF/DC ground externally. All ground leads must be soldered to pCB rF/DC ground. interface schematic 5 Freq. Multipliers - pAssiVe - sMt 3, 6 GND 2 rFiN pin is DC coupled and matched to 50 Ohms. 7 rFOut pin is DC coupled and matched to 50 Ohms. 5-5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Evaluation PCB 5 Freq. Multipliers - pAssiVe - sMt 5-6 List of Materials for Evaluation PCB 103313 item J1, J2 u1 pCB [2] Description pCB Mount sMA Connector HMC187AMs8(e) Doubler 103311 eval Board [1] [1] reference this number when ordering complete evaluation pCB [2] Circuit Board Material: rogers 4350 the circuit board used in the application should be generated with proper rF circuit design techniques. signal lines should have 50 ohm impedance while the package N/C and ground leads should be connected directly to the ground plane similar to that shown. the evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com