189AMS8E

HMC189AMS8 / 189AMS8E v02.1010 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 2 - 4 GHz INPUT Features Conversion Loss: 13 dB Fo, 3Fo, 4Fo Isolation: 33 dB Input Drive Level: +10 to +15 dBm Typical Applications The HMC189AMS8(E) is suitable for: • Wireless Local Loop • LMDS, VSAT, and Point-to-Point Radios • UNII & HiperLAN 5 FREQ. MULTIPLIERS - PASSIVE - SMT • Test Equipment Functional Diagram General Description The HMC189AMS8(E) is a miniature passive frequency doublers in plastic 8-lead MSOP packages. The suppression of undesired fundamental and higher order harmonics is 33 dB typical with respect to input signal levels. The doubler uses the same diode/balun technology used in Hittite MMIC mixers. The doubler is ideal for high volume applications where frequency doubling of a lower frequency is more economical than directly generating a higher frequency. The passive Schottky diode doubler technology contributes no measurable additive phase noise onto the multiplied signal. Electrical Specifications, TA = +25° C, As a Function of Drive Level Parameter Frequency Range, Input Frequency Range, Output Conversion Loss FO Isolation (with respect to input level) 3FO Isolation (with respect to input level) 4FO Isolation (with respect to input level) 29 37 32 Input = +10 dBm Min. Typ. 2.5 - 3.5 5-7 13 32 43 40 17 30 35 33 Max. Min. Input = +13 dBm Typ. 2.5 - 3.75 5 - 7.5 13 33 42 40 15 31 33 31 Max. Min. Input = +15 dBm Typ. 2-4 4-8 13 34 40 40 17 Max. Units GHz GHz dB dB dB dB 5-1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC189AMS8 / 189AMS8E v02.1010 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 2 - 4 GHz INPUT Isolation* @ +13 dBm Drive Level 0 -10 Conversion Loss @ +13 dBm Drive Level 0 -5 CONVERSION LOSS (dB) ISOLATION (dB) -10 -15 -20 -25 -30 -35 2 3 4 5 6 7 8 9 10 -20 1F0 3F0 4F0 -30 -40C +25C +85C -40 5 0 2 4 6 8 10 12 14 16 18 20 -50 -60 OUTPUT FREQUENCY (GHz) FREQUENCY (GHz) * With respect to input level Conversion Loss vs. Drive Level 0 -5 +7 dBm +10 dBm +13 dBm +15 dBm Isolation* @ +10 dBm Drive Level 0 -10 -20 -30 -40 -50 -60 -70 1F0 3F0 4F0 -15 -20 -25 -30 -35 2 3 4 5 6 7 8 9 10 ISOLATION (dB) -10 0 2 4 6 8 10 12 14 16 18 20 OUTPUT FREQUENCY (GHz) FREQUENCY (GHz) * With respect to input level Input Return Loss vs. Drive Level 0 Output Return Loss for Several Input Frequencies 0 Input=2 GHz Input=3 GHz Input=4 GHz -5 -5 RETURN LOSS (dB) -10 RETURN LOSS (dB) -10 -15 +7 dBm +10 dBm +13 dBm -15 -20 -20 -25 1 2 3 4 5 -25 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 5-2 FREQ. MULTIPLIERS - PASSIVE - SMT CONVERSION LOSS (dB) HMC189AMS8 / 189AMS8E v02.1010 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 2 - 4 GHz INPUT Absolute Maximum Ratings Input Drive Storage Temperature Operating Temperature +27 dBm -65 to +150 °C -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing 5 FREQ. MULTIPLIERS - PASSIVE - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC189AMS8 HMC189AMS8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] [2] Package Marking [3] 189A XXXX 189A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 5-3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC189AMS8 / 189AMS8E v02.1010 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 2 - 4 GHz INPUT Pin Description Pin Number 1, 4, 5, 8 Function N/C Description These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. Interface Schematic 2 RFIN Pin is DC coupled and matched to 50 Ohms from 2.0 to 4.0 GHz 3, 6 GND All ground leads must be soldered to PCB RF/DC ground. 5 FREQ. MULTIPLIERS - PASSIVE - SMT 5-4 7 RFOUT Pin is DC coupled and matched to 50 Ohms from 4.0 to 8.0 GHz Evaluation PCB List of Materials for Evaluation PCB 103313 [1] Item J1, J2 U1 PCB [2] Description PCB Mount SMA Connector HMC189AMS8(E) Doubler 103311 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com