204MS8GE

HMC204MS8G / 204MS8GE v04.0505 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Typical Applications Features Conversion Loss: 17 dB Fo, 3Fo, 4Fo Isolation: 42 dB Passive: No Bias Required Ultra Small Package: MSOP8 6 FREQUENCY MULTIPLIERS - SMT The HMC204MS8G / HMC204MS8GE is suitable for: • Wireless Local Loop • LMDS, VSAT, and Point-to-Point Radios • UNII & HiperLAN • Test Equipment Functional Diagram General Description The HMC204MS8G & HMC204MS8GE are passive miniature frequency doublers in 8 lead MSOP surface mount packages. Suppression of undesired fundamental and higher order harmonics is 42 dB typical with respect to input signal level. The doubler utilizes the same GaAs Schottky diode/balun technology found in Hittite MMIC mixers. It requires no DC bias and adds no measurable phase noise onto the multiplied signal. Electrical Specifications, TA = +25° C, As a Function of Drive Level Input = +10 dBm Parameter Frequency Range, Input Frequency Range, Output Conversion Loss FO Isolation (with respect to input level) 3FO Isolation (with respect to input level) 4FO Isolation (with respect to input level) 37 37 45 Min. Typ. 5.5 - 7.5 11.0 - 15.0 17 42 45 55 21 37 37 40 Max. Min. Input = +12 dBm Typ. 5.0 - 8.0 10.0 - 16.0 17 42 45 50 22 39 35 35 Max. Min. Input = +15 dBm Typ. 4.0 - 8.0 8.0 - 16.0 17 45 45 45 21 Max. Units GHz GHz dB dB dB dB 6 - 30 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC204MS8G / 204MS8GE v04.0505 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Conversion Gain @ +25° vs. Drive Level 0 -5 CONVERSION GAIN (dB) -10 -15 -20 -25 -30 -35 -40 + 8 dBm +10 dBm +12 dBm +15 dBm Conversion Gain vs. Temperature @ +15 dBm Drive Level 0 -5 CONVERSION GAIN (dB) -10 -15 -20 -25 -30 -35 -40 3 4 5 6 7 8 9 INPUT FREQUENCY (GHz) +25 C +85 C -40 C 6 FREQUENCY MULTIPLIERS - SMT 6 - 31 3 4 5 6 7 8 9 INPUT FREQUENCY (GHz) Isolation @ +15 dBm Drive Level* 0 Input Return Loss vs. Drive Level 0 INPUT RETURN LOSS (dB) -20 ISOLATION (dB) -5 + 14 dBm + 12 dBm + 10 dBm + 8 dBm -40 -10 -60 Fo 3Fo 4Fo -15 -80 -100 0 5 10 15 20 25 30 35 FREQUENCY (GHz) -20 4 5 6 FREQUENCY (GHz) 7 8 *With respect to input level Output Return Loss 0 OUTPUT RETURN LOSS (dB) -4 -8 -12 -16 -20 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC204MS8G / 204MS8GE v04.0505 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Absolute Maximum Ratings 6 FREQUENCY MULTIPLIERS - SMT Input Drive Storage Temperature Operating Temperature +27 dBm -65 to +150 °C -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC204MS8G HMC204MS8GE Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H204 XXXX H204 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 6 - 32 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC204MS8G / 204MS8GE v04.0505 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Evaluation PCB 6 FREQUENCY MULTIPLIERS - SMT List of Materials for Evaluation PCB 103313 [1] Item J1, J2 U1 PCB [2] Description PCB Mount SMA Connector HMC204MS8G / HMC204MS8GE 103311 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and exposed ground paddle should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 - 33