208AMS8E

HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz 9 MIXERS - DBL-BAL - SMT Typical Applications The HMC208AMS8 / HMC208AMS8E is ideal for: • Base Stations • PCMCIA Transceivers • Cable Modems • Portable Wireless Features Ultra Small Package: MSOP8 Conversion Loss: 9 dB LO / RF Isolation: 24 dB Input IP3: +17 dBm Functional Diagram General Description The HMC208AMS8 & HMC208AMS8E are ultra miniature double-balanced mixers in 8 lead plastic surface mount packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, biphase (de)modulator, or phase comparator. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25° C, As a Function of LO Drive Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) 20 13 10 13 7 LO = +13 dBm IF = 70 MHz Typ. 0.7 - 2.0 DC - 0.5 9 9 24 17 14 17 10 10.5 10.5 32 22 17 12 5 Max. Min. LO = +10 dBm IF = 70 MHz Typ. 0.8 - 1.2 DC - 0.5 8.5 8.5 40 30 22 16 8 10.5 10.5 Max. GHz GHz dB dB dB dB dB dBm dBm Units 0-1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz Conversion Loss vs Temperature @ LO = +13 dBm 0 CONVERSION LOSS (dB) Isolation @ LO = +13 dBm 0 -10 9 MIXERS - DBL-BAL - SMT 0-2 -5 ISOLATION (dB) -20 -30 -40 -50 -60 0.5 RF/IF LO/IF LO/RF -10 -15 -40 C +25 C +85 C -20 0.5 1 1.5 FREQUENCY (GHz) 2 2.5 1 1.5 FREQUENCY (GHz) 2 2.5 Conversion Loss vs. LO Drive 0 +7 dBm +9 dBm +11 dBm +13 dBm +15 dBm Return Loss @ LO = +13 dBm 0 CONVERSION LOSS (dB) RETURN LOSS (dB) -5 -5 -10 -10 -15 RF IF LO -15 -20 -20 0.5 -25 1 1.5 FREQUENCY (GHz) 2 2.5 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) IF Bandwidth @ LO = +13 dBm 0 P1dB vs. Temperature @ LO = +13 dBm 14 -40 C +25 C +85 C CONVERSION LOSS (dB) -5 P1dB (dBm) 0 0.2 0.4 0.6 0.8 1 13 -10 12 -15 11 -20 10 -25 IF FREQUENCY (GHz) 9 0.6 0.8 1 1.2 1.4 1.6 1.8 2 FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz 9 MIXERS - DBL-BAL - SMT Input IP3 vs. LO Drive 30 +9 dBm +11 dBm +13 dBm Input IP3 vs. Temperature @ LO = +13 dBm 25 -40 C +25 C +85 C 25 23 IP3 (dBm) IP3 (dBm) 20 21 15 19 10 17 5 0.6 0.8 1 1.2 1.4 1.6 1.8 2 15 0.6 0.8 1 1.2 1.4 1.6 1.8 2 LO FREQUENCY (GHz) LO FREQUENCY (GHz) Input IP2 vs. LO Drive 70 Input IP2 vs. Temperature @ LO = +13 dBm 70 60 60 IP2 (dBm) 40 +9 dBm +11 dBm +13 dBm IP2 (dBm) 50 50 40 -40 C +25 C +85 C 30 30 20 0.6 0.8 1 1.2 1.4 1.6 1.8 2 20 0.6 0.8 1 1.2 1.4 1.6 1.8 2 LO FREQUENCY (GHz) LO FREQUENCY (GHz) 0-3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 12 73 68 >95 1 2 0 64 >95 >95 2 28 43 69 87 >95 3 16 45 61 63 >95 4 51 29 78 92 >95 Harmonics of LO LO Freq. (GHz) 0.7 0.9 1.1 1.3 1.5 1.7 nLO Spur at RF Port 1 49 44 38 37 32 29 2 47 50 50 52 80 58 3 41 39 50 47 58 63 4 73 68 97 85 90 99 9 MIXERS - DBL-BAL - SMT 0-4 RF = 0.9 GHz @ -10 dBm LO = 0.97 GHz @ +13 dBm All values in dBc relative to the IF LO = +13 dBm Values in dBc below input LO level measured at RF Port. Absolute Maximum Ratings RF / Input LO Drive Storage Temperature Operating Temperature ESD Sensitivity (HBM) +13 dBm +27 dBm -65 to +150 °C -40 to +85 °C Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz 9 MIXERS - DBL-BAL - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC208AMS8 HMC208AMS8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H208A XXXX H208A XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 0-5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz Evaluation PCB 9 MIXERS - DBL-BAL - SMT List of Materials for Evaluation PCB 101830 [1] Item J1 - J3 U1 PCB [2] Description PCB Mount SMA RF Connector HMC208AMS8 / HMC208AMS8E Mixer 101828 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 0-6