216MS8E

HMC216MS8 / 216MS8E v02.0705 GaAs MMIC SMT DOUBLE-BALANCED FET MIXER, 1.3 - 2.5 GHz Typical Applications The HMC216MS8 / HMC216MS8E is ideal for: • Base Stations Features IP3 (Input): +25 dBm @ +11 dBm LO LO Range = +3 to +11 dBm Conversion Loss: 8.5 dB LO / RF Isolation: 32 dB 7 MIXERS - SMT • WirelessLAN • PCMCIA • Portable Wireless Functional Diagram General Description The HMC216MS8 & HMC216MS8E are ultra miniature double-balanced FET mixers in 8 lead plastic surface mount packages (MSOP). This MMIC mixer is constructed of switched GaAs FETs and novel planar transformer baluns on the chip. In addition to an LO drive of +3 to +13 dBm, a gate voltage of Vgg = -0.9 to -1.6 Vdc is required. The device can be used as an upconverter or downconverter for 1900 or 2400 MHz applications. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25° C, As a Function of LO Drive, Vgg = -1.2 Vdc LO = +11 dBm Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) 27 17 21 8 Typ. 1.3 - 2.5 DC - 0.65 9 9 30 20 25 11 10.5 10.5 27 17 14 5 Max. Min. Typ. 1.6 - 2.3 DC - 0.5 8.5 8.5 32 20 18 10 10 10 27 17 8 3 Max. Min. Typ. 1.7 - 2.0 DC - 0.4 9 9 32 20 12 8 10.5 10.5 Max. GHz GHz dB dB dB dB dBm dBm LO = +7 dBm LO = +3 dBm Units 7 - 78 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC216MS8 / 216MS8E v02.0705 GaAs MMIC SMT DOUBLE-BALANCED FET MIXER, 1.3 - 2.5 GHz Conversion Loss vs Temperature @ LO = +7 dBm -6 -8 CONVERSION LOSS (dB) -10 Isolation @ LO = +7 dBm 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 RF/IF LO/IF LO/RF -12 -14 -16 -18 -20 -22 1 1.5 2 FREQUENCY (GHz) 2.5 3 -40 C +25 C +85 C 7 MIXERS - SMT 7 - 79 1 1.5 2 FREQUENCY (GHz) 2.5 3 Conversion Loss vs. LO Drive 0 Return Loss @ LO = +7 dBm 0 CONVERSION LOSS (dB) -5 RETURN LOSS (dB) -5 -10 -10 +3 dBm +5 dBm +7 dBm +9 dBm +11 dBm -15 RF IF LO -15 -20 -20 1 1.5 2 FREQUENCY (GHz) 2.5 3 -25 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) IF Bandwidth @ LO = +7 dBm 0 P1dB vs. Temperature for LO = +7 dBm, Vgg = -1.2 Vdc 14 12 10 8 6 -40 C +25 C +85 C CONVERSION LOSS (dB) -5 P1dB (dBm) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -10 -15 -20 4 2 1.2 -25 IF FREQUENCY (GHz) 1.4 1.6 1.8 2 2.2 2.4 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC216MS8 / 216MS8E v02.0705 GaAs MMIC SMT DOUBLE-BALANCED FET MIXER, 1.3 - 2.5 GHz Input IP3 vs. Temperature and Vgg for @ LO = +7 dBm 23 THIRD ORDER INTERCEPT (dBm) 22 21 20 19 18 17 16 15 -1.6 -40 C +25 C +85 C Input IP3 vs. LO Drive and Vgg 30 THIRD ORDER INTERCEPT (dBm) 7 MIXERS - SMT 25 +5 dBm +7 dBm +9 dBm +11 dBm 20 15 10 -1.6 -1.5 -1.3 -1.2 -1.1 -0.9 -0.8 -1.5 -1.3 -1.2 -1.1 -0.9 -0.8 GATE VOLTAGE (V) GATE VOLTAGE (V) Input IP2 vs. Temperature and Vgg for @ LO = +7 dBm 60 SECOND ORDER INTERCEPT (dBm) 55 50 45 40 35 30 25 20 -1.6 -40 C +25 C +85 C -1.5 -1.3 -1.2 -1.1 -0.9 -0.8 GATE VOLTAGE (V) MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 14 45 83 >105 1 -1 0 45 67 >105 2 14 28 59 62 >105 3 24 21 55 59 85 4 40 46 50 77 96 Harmonics of LO LO Freq. (GHz) 1.5 1.7 1.9 2.1 2.3 2.5 nLO Spur at RF Port 1 41 38 34 31 29 32 2 47 47 41 37 38 45 3 61 72 69 72 74 65 4 78 71 72 79 74 74 RF = 1.975 GHz @ -10 dBm LO = 1.8 GHz @ +7 dBm, Vgg = -1.2V All values in dBc below IF power level (-1RF + 1LO). LO = +7 dBm, Vgg = 1.2V Values in dBc below input LO level measured at the RF port. 7 - 80 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC216MS8 / 216MS8E v02.0705 GaAs MMIC SMT DOUBLE-BALANCED FET MIXER, 1.3 - 2.5 GHz Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature +13 dBm +27 dBm -65 to +150 °C -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 7 MIXERS - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Outline Drawing Package Information Part Number HMC216MS8 HMC216MS8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H216 XXXX H216 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 81 HMC216MS8 / 216MS8E v02.0705 GaAs MMIC SMT DOUBLE-BALANCED FET MIXER, 1.3 - 2.5 GHz Evaluation Circuit Board 7 MIXERS - SMT List of Materials for Evaluation PCB 102037 Item J1 - J3 J4, J5 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin HMC216MS8 / HMC216MS8E Mixer 102035 Evaluation Board [1] [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. 7 - 82 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC216MS8 / 216MS8E v02.0705 GaAs MMIC SMT DOUBLE-BALANCED FET MIXER, 1.3 - 2.5 GHz Notes: 7 MIXERS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 83