245QS16E

HMC245QS16 / 245QS16E v02.0805 GaAs MMIC SP3T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Features Low Insertion Loss: 0.5 dB @ 2.0 GHz Non-Reflective Design Integrated 2:3 TTL Decoder “All Off” Isolation State Single Positive Suppy: Vdd = +5V 16 Lead QSOP SMT Package Typical Applications The HMC245QS16 / HMC245QS16E is ideal for: • Basestation Infrastructure • CATV / DBS • Wireless Local Loop 8 SWITCHES - SMT • Test Equipment Functional Diagram General Description The HMC245QS16 & HMC245QS16E are low cost non-reflective SP3T switches in 16-lead QSOP surface mount packages. Covering DC to 3.5 GHz, the switch offers 30 to 40 dB isolation and a low insertion loss of 0.5 dB. A 2:3 TTL/CMOS compatible decoder is integrated on the switch requiring only 2 control lines and a single +5V bias to select each path, replacing 6 control lines normally required by GaAs SP3T switches. Electrical Specifications, TA = +25° C, For TTL Control and Vdd= +5V in a 50 Ohm System Parameter Insertion Loss Frequency DC - 2.0 GHz DC - 3.0 GHz DC - 3.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.5 GHz “On State” “Off State” DC - 1.5 GHz DC - 3.5 GHz 0.3 - 3.5 GHz 0.5 - 3.5 GHz 0.3 - 2.5 GHz 0.3 - 3.5 GHz 0.3 - 2.5 GHz 0.3 - 3.5 GHz 0.3 - 3.5 GHz 23 22 44 40 40 35 31 26 Min. Typ. 0.5 0.6 0.7 44 39 35 30 20 17 12 15 26 25 48 44 40 150 Max. 0.8 0.9 1.0 Units dB dB dB dB dB dB dB dB dB dB dB dBm dBm Isolation Return Loss Return Loss RF1 - 3 Input Power for 1 dB Compression Input Third Order Intercept (Two-tone Input Power = +7 dBm each tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) ns ns 8 - 118 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC245QS16 / 245QS16E v02.0805 GaAs MMIC SP3T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Insertion Loss vs. Temperature 0 -0.5 INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) Isolation 0 -10 -20 -30 -40 -50 -60 -70 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) RF1 RF2 RF3 ISOLATION (dB) +25C +85C -40C 8 SWITCHES - SMT 8 - 119 Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) RFC RF1-3 "On" RF1-3 "Off" Off State Isolation 0 -10 -20 -30 -40 -50 -60 -70 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) RF1 RF2 RF3 0.1 and 1 dB Input Compression Point 30 INPUT COMPRESSION POINT (dBm) 29 28 Input Third Order Intercept Point 54 52 50 48 46 44 42 40 0.5 26 25 24 23 22 21 20 0.5 1 1.5 0.1 dB Compression Point 1 dB Compression Point INPUT IP3 (dBm) 27 ISOLATION (dB) 2 2.5 3 3.5 4 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC245QS16 / 245QS16E v02.0805 GaAs MMIC SP3T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Bias Voltage & Current Vdd Range= +5.0 Vdc ±10% Vdd (Vdc) +5.0 Idd (Typ) (mA) 3.0 Idd (Max) (mA) 6.0 Truth Table Control Input A Low High B Low Low High High Signal Path State RF COM to: RF1 RF2 RF3 All Off TTL/CMOS Control Voltages Low High 8 SWITCHES - SMT State Low High Bias Condition 0 to +0.8 Vdc @ 5 uA Typ. +2.0 to +5.0 Vdc @ 70 uA Typ. 8 - 120 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC245QS16 / 245QS16E v02.0805 GaAs MMIC SP3T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Absolute Maximum Ratings Bias Voltage Range (Port Vdd) Control Voltage Range (A & B) Channel Temperature Thermal Resistance (Insertion Loss Path) Thermal Resistance (Terminated Path) Storage Temperature Operating Temperature Maximum Input Power Vdd = +5 Vdc ESD Sensitivity (HBM) +7.0 Vdc -0.5V to Vdd +1 Vdc 150 °C 210 °C/W 250 °C/W -65 to +150 °C -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 SWITCHES - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. +20 dBm (0.05 - 0.5 GHz) +27 dBm (0.5 - 3.5 GHz) Class 1A Outline Drawing Package Information Part Number HMC245QS16 HMC245QS16E Package Body Material Low Stress Injection Molded Plastic Silica and Silicon Impregnated RoHS-compliant Low Stress Injection Molded Plastic Silica and Silicon Impregnated Leadframe Plating Sn/Pb Solder 100% Matte Tin MSL Rating MSL1 MSL1 [1] Package Marking [3] HMC245 XXXX HMC245 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 121 HMC245QS16 / 245QS16E v02.0805 GaAs MMIC SP3T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Pin Descriptions Pin Number 1, 6, 12, 14 Function RF3, RF2, RF1, RFC Description This pin is DC coupled and matched to 50 Ohms. Blocking capacitors are required. This pin must be connected to PCB RF ground to maximize isolation. Interface Schematic 2 - 5, 7, 11, 13, 15, 16 GND 8 SWITCHES - SMT 8 Vdd Supply Voltage +5.0 Vdc ±10% 9 B See truth table and control voltage table. 10 A See truth table and control voltage table. 8 - 122 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC245QS16 / 245QS16E v02.0805 GaAs MMIC SP3T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Evaluation PCB 8 SWITCHES - SMT List of Materials for Evaluation PCB 106687 Item J1 - J4 J5 - J8 C1 - C4 C5 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 100 pF Capacitor, 0402 Pkg. 10k pF Capacitor, 0603 Pkg. HMC245QS16 / HMC245QS16E SP3T Switch 106536 Evaluation PCB [1] The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 123