296MS8E

HMC296MS8 / 296MS8E v03.0705 Typical Applications • Miniature Basestations The HMC296MS8 / HMC296MS8E is ideal for: 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT • PCMCIA • Portable Wireless • WirelessLAN Functional Diagram ED U IN NT T O SC DUC DI RO P Features Input IP3: +24 dBm @ +11 dBm LO LO Range = +3 to +11 dBm Conversion Loss: 7 dB LO/RF Isolation: 40 dB LOW LO DRIVE DOUBLE-BALANCED FET MIXER, 1.1 - 1.7 GHz w r Ne o ed f Description d General men om The HMC296MS8 & HMC296MS8E are low LO drive, Rec ot high IP3 double-balanced FET mixers in 8 lead plastic N surface mount MSOP packages. This MMIC mixer is constructed of switched GaAs FETs and novel planar transformer baluns on the chip. The device can be used as an up or downconverter for 1.1 to 1.7 GHz applications. The consistent MMIC performance will improve system operation. The package dimensions are 0.118” x 0.192” (3.0 x 4.9 mm). s sign De Electrical Specifi cations, TA = +25° C, As a Function of LO Drive, Vgg = -1.5 Vdc LO = +11 dBm Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) 30 21 20 10 Typ. 1.1 - 1.7 DC - 0.7 7 7 40 26 24 14 10 10 35 22 15 6 Max. Min. Typ. 1.1 - 1.7 DC - 0.5 7.5 7.5 40 26 18 9 10.5 10.5 35 22 11 2 Max. Min. Typ. 1.2 - 1.6 DC - 0.4 7.5 7.5 40 26 14 4 11.5 11.5 Max. GHz GHz dB dB dB dB dBm dBm LO = +7 dBm LO = +3 dBm Units *Unless otherwise noted, all measurements performed as downconverter, IF= 70 MHz. 10 - 1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC296MS8 / 296MS8E v03.0705 Conversion Loss vs. Temperature @ LO = 11 dBm -5 -6 -7 -40 -50 -60 -9 +25 C +85 C -40 C -10 1 1.2 1.4 1.6 1.8 2 1 1.2 1.4 1.6 1.8 2 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Loss vs. LO Drive -5 +11 dBm +13 dBm +9 dBm +7 dBm +5 dBm +3 dBm Return Loss @ LO = 11 dBm 0 -6 -5 RETURN LOSS (dB) -7 -10 -8 -15 RF IF LO -9 -20 -10 1 1.2 1.4 1.6 1.8 2 FREQUENCY (GHz) -25 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) If Bandwidth @ LO = 11 dBm 0 CONVERSION LOSS (dB) -5 -10 -15 -20 -25 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 IF FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 MIXERS - SINGLE & DOUBLE BALANCED - SMT -8 ED U IN NT T O SC DUC DI RO P Isolation @ LO = 11 dBm 0 -10 -20 -30 RF/IF LO/RF LO/IF LOW LO DRIVE DOUBLE-BALANCED FET MIXER, 1.1 - 1.7 GHz CONVERSION LOSS (dB) ISOLATION (dB) D New r d fo e end m com e ot R N s sign e 10 CONVERSION LOSS (dB) HMC296MS8 / 296MS8E v03.0705 P1dB vs. LO Level, Vgg = -1.5 V 16 14 P1dB (dBm) IP3 (dBm) 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT 12 10 8 6 4 2 1.1 1.2 ED U IN NT T O SC DUC DI RO P Input IP3 vs. LO Drive * 30 +11 dBm +7 dBm +3 dBm LOW LO DRIVE DOUBLE-BALANCED FET MIXER, 1.1 - 1.7 GHz 25 20 1.3 1.4 FREQUENCY (GHz) w r Ne o ed f d men om Rec Not 15 s sign De 1.5 1.6 +11 dBm +7 dBm +3 dBm 1.5 1.6 1.7 10 1.1 1.2 1.3 1.4 1.7 1.8 FREQUENCY (GHz) Input IP3 vs. Temperature @ LO = 11 dBm* 30 Input IP2 vs. Temperature @ LO = +11 dBm* 70 65 25 IP3 (dBm) IP2 (dBm) 60 55 50 45 40 35 1.1 +85 C +25 C -40 C 20 15 +85 C +25 C -40 C 10 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.2 1.3 1.4 1.5 1.6 1.7 1.8 FREQUENCY (GHz) FREQUENCY (GHz) * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 10 - 3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC296MS8 / 296MS8E v03.0705 MxN Spurious Outputs mRF 0 1 2 3 4 0 1 xx 17 48 79 >105 >106 >102 99 92 RF = 1.47 GHz @ -10 dBm LO = 1.4 GHz @ 11 dBm, Vgg= -1.5V All values in dBc relative to the IF 1.8 2 36 27 29 57 57 59 29 60 LO = 11 dBm, Vgg= -1.5V Values in dBc below input LO level measured at the RF port. Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature Vgg ESD Sensitivity (HBM) +20 dBm +27 dBm -65 to +150 °C -40 to +85 °C -10V Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P Harmonics of LO LO Frequency (GHz) 1 1 nLO 2 nLO Spur at RF Port 2 3 3 4 -35 0 0 29 14 18 33 47 34 51 41 27 47 41 67 76 55 1.2 1.4 27 25 70 LOW LO DRIVE DOUBLE-BALANCED FET MIXER, 1.1 - 1.7 GHz 4 45 47 44 52 D New r d fo e end m com e ot R N 89 72 1.6 29 30 22 23 s sign e 42 54 10 HMC296MS8 / 296MS8E v03.0705 Outline Drawing 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P w r Ne o ed f d men om Rec Not s sign De NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] LOW LO DRIVE DOUBLE-BALANCED FET MIXER, 1.1 - 1.7 GHz 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC296MS8 HMC296MS8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H296 XXXX H296 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 10 - 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC296MS8 / 296MS8E v03.0705 Evaluation PCB List of Materials for Evaluation PCB 102037 [1] Item J1 - J3 U1 PCB [2] Description PCB Mount SMA F Connector HMC296MS8 / HMC296MS8E Mixer 102035 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: FRA The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 6 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P D New r d fo e end m com e ot R N s sign e LOW LO DRIVE DOUBLE-BALANCED FET MIXER, 1.1 - 1.7 GHz 10