311ST89E

HMC311ST89 / 311ST89E v01.0505 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz 5 AMPLIFIERS - SMT Designer’s Kit Available Typical Applications The HMC311ST89 / HMC311ST89E is an ideal RF/IF gain block or LO buffer amplifier for: • Cellular / PCS / 3G • Fixed Wireless & WLAN • CATV & Cable Modem • Microwave Radio Features P1dB Output Power: +15.5 dBm Output IP3: +31.5 dBm Gain: 16 dB 50 Ohm I/O’s Industry Standard SOT89 Package Included in the HMC-DK001 Designer’s Kit Functional Diagram General Description The HMC311ST89 & HMC311ST89E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT DC to 6 GHz amplifiers. Packaged in an industry standard SOT89, the amplifier can be used as either a cascadable 50 Ohm gain stage or to drive the LO of HMC mixers with up to +16.5 dBm output power. The HMC311ST89 & HMC311ST89E offer 16 dB of gain and an output IP3 of +31.5 dBm while requiring only 54 mA from a +5V supply. The Darlington feedback pair used results in reduced sensitivity to normal process variations and yields excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifications, Vs= 5.0 V, Rbias= 22 Ohm, TA = +25° C Parameter Gain DC - 1.0 GHz 1.0 - 4.0 GHz 4.0 - 6.0 GHz DC - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 6.0 GHz DC - 2.0 GHz 2.0 - 5.0 GHz 5.0 - 6.0 GHz DC - 6.0 GHz DC - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 6.0 GHz DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 6.0 GHz DC - 4.0 GHz 4.0 - 6.0 GHz 13.5 12.0 10.0 Min. 14.0 13.0 12.5 Typ. 16.0 15.0 14.5 0.004 0.007 0.012 8 7 8 20 15.5 15.0 13.0 31.5 30 27 24 4.5 5 54 0.007 0.012 0.016 Max. Units dB dB dB dB/ °C dB/ °C dB/ °C dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dB mA Gain Variation Over Temperature Return Loss Input / Output Reverse Isolation Output Power for 1 dB Compression (P1dB) Output Third Order Intercept (IP3) Noise Figure Supply Current (Icq) Note: Data taken with broadband bias tee on device output. 5 - 42 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC311ST89 / 311ST89E v01.0505 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz Broadband Gain & Return Loss 20 15 10 RESPONSE (dB) S21 S11 S22 Gain vs. Temperature 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 0 1 2 3 4 5 AMPLIFIERS - SMT 5 - 43 0 -5 -10 -15 -20 1 2 3 4 5 GAIN (dB) 5 +25 C +85 C -40 C 6 7 8 9 5 6 7 8 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Temperature 0 Output Return Loss vs. Temperature 0 OUTPUT RETURN LOSS (dB) INPUT RETURN LOSS (dB) -5 -5 -10 -10 -15 +25 C +85 C -40 C -15 +25 C +85 C -40 C -20 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) -20 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) Reverse Isolation vs. Temperature 0 REVERSE ISOLATION (dB) Noise Figure vs. Temperature 10 9 -5 NOISE FIGURE (dB) +25 C +85 C -40 C 8 7 6 5 4 3 2 1 +25 C +85 C -40 C -10 -15 -20 -25 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC311ST89 / 311ST89E v01.0505 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz 5 AMPLIFIERS - SMT P1dB vs. Temperature 18 16 14 P1dB (dBm) 12 10 8 6 4 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) Psat vs. Temperature 18 16 14 Psat (dBm) 12 10 8 6 4 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) +25 C +85 C -40 C +25 C +85 C -40 C Power Compression @ 1 GHz 18 Pout (dBm), GAIN (dB), PAE (%) 16 14 12 10 8 6 4 2 0 -2 -4 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 Pout Gain PAE Power Compression @ 6 GHz 18 Pout (dBm), GAIN (dB), PAE (%) 16 14 12 10 8 6 4 2 0 -2 -4 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 Pout Gain PAE INPUT POWER (dBm) INPUT POWER (dBm) Output IP3 vs. Temperature 34 32 30 28 OIP3 (dBm) 26 24 22 20 18 16 14 12 10 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) +25 C +85 C -40 C Gain, Power, OIP3 & Supply Current vs. Supply Voltage @ 1 GHz GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 40 35 30 25 20 15 10 5 4.5 4.75 5 Vs (Vdc) 5.25 Icq Gain P1dB Psat OIP3 80 70 60 50 40 30 20 10 5.5 Icq (mA) 5 - 44 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC311ST89 / 311ST89E v01.0505 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz Absolute Maximum Ratings Collector Bias Voltage (Vcc) RF Input Power (RFin)(Vcc = +3.9 Vdc) Junction Temperature Continuous Pdiss (T = 85 °C) (derate 5.21 mW/°C above 85 °C) Thermal Resistance (junction to lead) Storage Temperature Operating Temperature +7 Volts +10 dBm 150 °C 0.34 W 191 °C/W -65 to +150 °C -40 to +85 °C 5 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC311ST89 HMC311ST89E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H311 XXXX H311 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 45 AMPLIFIERS - SMT HMC311ST89 / 311ST89E v01.0505 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz 5 AMPLIFIERS - SMT Pin Descriptions Pin Number Function Description Interface Schematic 1 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias for the output stage. 2, 4 GND These pins and package bottom must be connected to RF/DC ground. Application Circuit Note: 1. Select Rbias to achieve Icq using equation below, Rbias > 22 Ohm. 2. External blocking capacitors are required on RFIN and RFOUT. Icq = Vs - 3.9 Rbias Recommended Component Values Frequency (MHz) Component 50 L1 C1, C2 270 nH 0.01 μF 900 56 nH 100 pF 1900 18 nH 100 pF 2200 18 nH 100 pF 2400 15 nH 100 pF 3500 8.2 nH 100 pF 5200 3.3 nH 100 pF 5800 3.3 nH 100 pF 5 - 46 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC311ST89 / 311ST89E v01.0505 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz Evaluation PCB 5 AMPLIFIERS - SMT List of Materials for Evaluation PCB 108313 [1] Item J1 - J2 J3 - J4 C1, C2 C3 C4 C5 R1 L1 U1 PCB [2] Description PCB Mount SMA Connector DC Pin Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 2.2 μF Capacitor, Tantalum Resistor, 0805 Pkg. Inductor, 0603 Pkg. HMC311ST89 / HMC311ST89E 107368 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 47