340ALP5E

HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-bAlAnCeD DuAl MIxer, 1.7 - 4.5 GHz Features Conversion Loss: 8.0 dB LO/rF isolation: 45 dB LO/iF isolation: 33 dB input iP3: +20 dBm Conversion Gain Balance: 0.1 dB 32 Lead 5x5mm sMT Package: 25mm2 Typical Applications The HMC340ALP5 / HMC340ALP5e Dual Mixer is ideal for: 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT • Wireless infrastructure • Wireless Local Loop • image reject Mixer • i/Q Modulator • ssB Modulator Functional Diagram General Description The HMC340ALP5(e) is a double balanced dual mixer covering 1.7 - 4.5 GHz rF/LO range. This passive MMiC mixer is constructed of GaAs schottky diodes and on-chip baluns. The device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. The mixer symmetry of the HMC340ALP5(e) make it ideal for combining with external hybrids to implement a single sideband upconverter or image reject downconverter assembly. The consistent MMiC performance will improve system operation and assure regulatory compliance. A roHs compliant, leadless 5x5 mm QFN surface mount package (LP5) houses the dual MMiC mixer iC. electrical Specifications, TA = +25° C, As a Function of lo Drive Parameter Min. Frequency range, rF & LO Frequency range, iF Conversion Loss Conversion Gain Amplitude Balance Noise Figure (ssB) LO to rF isolation LO to iF isolation iP3 (input) 1 dB Gain Compression (input) 30 25 Typ. 1.7 - 4.5 DC - 1.5 8 0.10 8 45 33 20 12 10 0.25 10 40 33 LO = +13 dBm iF = 100 MHz Max. Min. Typ. 3.4 - 3.8 DC - 1.5 8 0.10 8 47 38 23 13 10 0.25 10 Max. GHz GHz dB dB dB dB dB dBm dBm Units * Unless otherwise noted, all measurements performed as single channel downconverter. 10 - 1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-bAlAnCeD DuAl MIxer, 1.7 - 4.5 GHz Single Channel: Isolation @ lo = +13 dbm 0 RF TO IF LO TO RF LO TO IF Single Channel: Conversion Gain vs. Temperature @ lo = +13 dbm 0 CONVERSION GAIN (dB) -5 ISOLATION (dB) -15 -10 -30 10 4.5 5 -15 +25 C +85 C - 40 C -45 -20 1 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) -60 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) Single Channel: Conversion Gain vs. lo Drive 0 LO= +9 dBm LO= +11 dBm LO= +13 dBm LO= +15 dBm Single Channel: return loss @ lo = +13 dbm 0 RETURN LOSS (dB) -5 -5 -10 -10 -15 -15 LO RF -20 1 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) -20 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) Single Channel: IF bandwidth @ lo = +13 dbm 0 Single Channel: Input P1db vs. Temperature @ lo = +13 dbm 15 14 -5 RESPONSE (dB) P1dB (dBm) 13 12 11 10 9 +25 C +85 C - 40 C -10 -15 RETURN LOSS CONVERSION GAIN -20 0 0.5 1 IF FREQUENCY (GHz) 1.5 2 8 1 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 Mixers - siNGLe & DOUBLe BALANCeD - sMT CONVERSION GAIN (dB) HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-bAlAnCeD DuAl MIxer, 1.7 - 4.5 GHz Single Channel: Input IP3 vs. Temperature @ lo = +13 dbm 30 Single Channel: Input IP3 vs. lo Drive 30 IP3 (dBm) 20 IP3 (dBm) LO= +11 dBm LO= +13 dBm LO= +15 dBm 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 25 25 20 15 15 +25C +85C -40C 10 1.5 2 2.5 3 3.5 4 4.5 5 10 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Single Channel: Input IP2 vs. lo Drive 70 65 60 IP2 (dBm) 55 50 45 40 35 30 1.5 LO= +11 dBm LO= +13 dBm LO= +15 dBm Single Channel: Input IP2 vs. Temperature @ lo = +13 dbm 60 55 50 IP2 (dBm) 45 40 35 30 1.5 +25C +85C -40C 2 2.5 3 3.5 4 4.5 5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Single Channel: upconverter Conversion Gain vs. lo Drive 0 Single Channel: upconverter IP3 vs. lo Drive 30 CONVERSION GAIN (dB) -5 IP3 (dBm) LO= +9 dBm LO= +11 dBm LO= +13 dBm LO= +15 dBm 25 20 -10 15 LO= +11 dBm LO= +13 dBm LO= +15 dBm -15 10 -20 1.5 2 2.5 3 3.5 4 4.5 5 5 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) 10 - 3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-bAlAnCeD DuAl MIxer, 1.7 - 4.5 GHz Dual Channel: Channel to Channel Isolation -70 Dual Channel: Conversion Gain Amplitude balance 1 AMPLITUDE BALANCE (dB) 0.5 ISOLATION (dB) -80 RF1 TO IF2 RF2 TO IF1 0 -90 10 4.5 5 -0.5 -100 -1 1 2 3 FREQUENCY (GHz) 4 5 -110 1.5 2 2.5 3 3.5 4 RF FREQUENCY (GHz) Dual Channel: lo1 to lo2 Isolation -20 Dual Channel: rF1 to rF2 Isolation -20 -30 ISOLATION (dB) ISOLATION (dB) -30 -40 -40 -50 -50 -60 -60 -70 1.5 2 2.5 3 3.5 4 4.5 5 -70 1.5 2 2.5 3 3.5 4 4.5 5 LO FREQUENCY (GHz) RF FREQUENCY (GHz) Dual Channel: IF1 to IF2 Isolation -20 Harmonics of lo LO Freq. (GHz) nLO spur at rF Port 1 39 40 43 44 44 42 38 36 2 29 26 28 38 48 49 49 53 3 57 63 41 63 66 63 63 59 4 68 68 63 67 70 67 83 89 -40 ISOLATION (dB) 1.5 2.0 2.5 -60 3.0 3.5 4.0 4.5 5.0 0 0.5 1 IF FREQUENCY (GHz) 1.5 2 -80 -100 LO = +13 dBm Values in dBc below input LO level measured at rF Port. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 Mixers - siNGLe & DOUBLe BALANCeD - sMT HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-bAlAnCeD DuAl MIxer, 1.7 - 4.5 GHz Mxn Spurious outputs nLO mrF 0 1 2 3 4 0 xx 19 71 86 86 1 11 0 67 86 86 2 20 26 67 85 86 3 36 37 68 78 86 4 45 41 71 78 86 Absolute Maximum ratings rF / iF input LO Drive +13 dBm +27 dBm 150°C 1.07 W 60.4 °C/W -65 to +150 °C -40 to +85 deg °C 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT Channel Temperature Continuous Pdiss (T = 85°C) (derate 16.55 mW/°C above 85°C) Thermal resistance (rTH) (junction to package base) storage Temperature Operating Temperature rF = 3.5 GHz @ -10 dBm LO = 3.6 GHz @ +13 dBm All values in dBc below iF power level eLeCTrOsTATiC seNsiTiVe DeViCe OBserVe HANDLiNG PreCAUTiONs outline Drawing NOTes: 1. LeADFrAMe MATeriAL: COPPer ALLOY 2. DiMeNsiONs Are iN iNCHes [MiLLiMeTers] 3. LeAD sPACiNG TOLerANCe is NON-CUMULATiVe. 4. PAD BUrr LeNGTH sHALL Be 0.15mm MAxiMUM. PAD BUrr HeiGHT sHALL Be 0.05mm MAxiMUM. 5. PACKAGe WArP sHALL NOT exCeeD 0.05mm. 6. ALL GrOUND LeADs AND GrOUND PADDLe MUsT Be sOLDereD TO PCB rF GrOUND. 7. reFer TO HiTTiTe APPLiCATiON NOTe FOr sUGGesTeD Package Information Part Number HMC340ALP5 HMC340ALP5e Package Body Material Low stress injection Molded Plastic roHs-compliant Low stress injection Molded Plastic LAND PATTerN. Lead Finish sn/Pb solder 100% matte sn MsL rating MsL1 MsL1 [1] Package Marking [3] H340A xxxx H340A xxxx [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number xxxx 10 - 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-bAlAnCeD DuAl MIxer, 1.7 - 4.5 GHz Pin Descriptions Pin Number 1, 2, 4, 5, 7-11, 13-18, 20, 21, 23-28, 30-32 Function N/C Description No Connection. These pins may be connected to rF ground without affecting performance. interface schematic 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 6 3, 6 LO1, LO2 LO Port: This pin is DC coupled and matched to 50 Ohms. 12, 29 iF2, iF1 iF Port: This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessary iF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 19, 22 rF2, rF1 rF Port: This pin is DC coupled and matched to 50 Ohms. Package Bottom GND Package bottom must be connect to rF/DC ground. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-bAlAnCeD DuAl MIxer, 1.7 - 4.5 GHz Application Circuit for use as an I/Q Modulator 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT Application Circuit for use as an IrM Mixer 10 - 7 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-bAlAnCeD DuAl MIxer, 1.7 - 4.5 GHz evaluation PCb 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 8 list of Materials for evaluation PCb 107482 item J1 - J6 U1 PCB [2] Description PCB Mount sMA rF Connector HMC340ALP5(e) Dual Mixer 107467 evaluation Board [1] [1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: rogers 4350 The circuit board used in the application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com