410MS8GE

HMC410MS8G / 410MS8GE Typical Applications The HMC410Ms8G / HMC410Ms8Ge is ideal for: 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT • Long Haul radio Platforms • Microwave radio • VsAT Functional Diagram ED U IN NT T O SC DUC DI RO P v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Features Conversion Loss: 8 dB LO/rF isolation: 40 dB LO/iF isolation: 37 dB input iP3: +24 dBm No external Components MsOP8G sMT Package e ot R N d men General Description com w r Ne o ed f s sign De The HMC410Ms8G & HMC410Ms8Ge are passive double balanced high iP3 mixers that operate between 9 GHz and 15 GHz. The HMC410Ms8G & HMC410Ms8Ge operate with LO drive levels between +13 dBm and +19 dBm, and provide 8 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias. Electrical Specifications, TA = +25° C Parameter Min. Frequency range, rF & LO Frequency range, iF Conversion Loss Noise Figure (ssB) LO to rF isolation LO to iF isolation rF to iF isolation iP3 (input) 1 dB Compression (input) 30 30 8 20 11 iF = 1.45 GHz LO = +17 dBm Typ. 9.0 - 15.0 DC - 2.5 8 8 40 - 45 37 17 24 14 11 11 Max. GHz GHz dB dB dB dB dB dBm dBm Units * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 10 - 1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410MS8G / 410MS8GE Conversion Gain vs. Temperature @ LO = +17 dBm 0 -5 -10 -15 +25 C -40 C +85 C -40 -50 -60 -20 8 9 10 11 12 13 FREQUENCY (GHz) N e ot R 14 15 d men com 16 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss @ LO = +17 dBm 0 CONVERSION GAIN (dB) RETURN LOSS (dB) -5 -5 -10 -10 -15 -15 LO = +11 dBm LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -20 RF LO -20 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) -25 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) IF Bandwidth @ LO = +17 dBm 0 -5 Upconverter Performance Conversion Gain @ LO = +17 dBm 0 CONVERSION GAIN (dB) -5 RESPONSE (dB) -10 -15 -20 -25 -30 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) IF CONVERSION GAIN IF RETURN LOSS -10 -15 -20 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 Mixers - siNGLe & DOUBLe BALANCeD - sMT ED U IN NT T O SC DUC DI RO P v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Isolation @ LO = +17 dBm 0 -10 -20 -30 RF/IF LO/RF LO/IF CONVERSION GAIN (dB) ISOLATION (dB) D New r d fo e s sign e 10 HMC410MS8G / 410MS8GE Input IP3 vs. LO Drive* 35 IP3 (dBm) IP3 (dBm) 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 30 25 20 15 9 10 ED U IN NT T O SC DUC DI RO P v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Input IP3 vs. Temperature @ LO = +17 dBm* 35 LO = +15 dBm LO = +17 dBm LO = +19 dBm 30 +25 C -40 C +85 C 25 20 11 12 13 FREQUENCY (GHz) N Input IP2 vs. LO Drive * 70 65 60 e ot R 14 d men com 15 15 w r Ne o ed f 9 10 11 s sign De 12 13 14 15 FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +17 dBm 20 +25 C -40 C +85 C LO = +15 dBm LO = +17 dBm LO = +19 dBm 18 P1dB (dBm) IP2 (dBm) 16 55 50 45 40 9 10 11 12 13 14 15 FREQUENCY (GHz) 14 12 10 9 10 11 12 13 14 15 FREQUENCY (GHz) MxN Spurious @ IF Port nLO mrF 0 1 2 3 4 0 xx 15 85 >90 N/A 1 4 0 70 >90 >90 2 28 40 67 >90 >90 3 23 62 78 79 >90 4 N/A 46 83 >90 >90 Harmonics of LO nLO spur @ rF Port LO Freq. (GHz) 9 10.5 12 13.5 15 16.5 1 34 37 44 47 40 34 2 28 37 45 46 56 47 3 46 50 46 62 58 51 4 60 69 60 N/A N/A N/A rF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +17 dBm All values in dBc relative to the iF power level. Measured as downconverter. LO = +17 dBm All values in dBc below input LO level @ rF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 10 - 3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410MS8G / 410MS8GE Absolute Maximum Ratings rF / iF input LO Drive iF DC Current storage Temperature Operating Temperature esD sensitivity (HBM) eLeCTrOsTATiC seNsiTiVe DeViCe OBserVe HANDLiNG PreCAUTiONs Outline Drawing e ot R N d men com NOTes: 1. LeADFrAMe MATeriAL: COPPer ALLOY 2. DiMeNsiONs Are iN iNCHes [MiLLiMeTers] 3. DiMeNsiON DOes NOT iNCLUDe MOLDFLAsH OF 0.15mm Per siDe. 4. DiMeNsiON DOes NOT iNCLUDe MOLDFLAsH OF 0.25mm Per siDe. 5. ALL GrOUND LeADs AND GrOUND PADDLe MUsT Be sOLDereD TO PCB rF GrOUND. Package Information Part Number HMC410Ms8G HMC410Ms8Ge Package Body Material Low stress injection Molded Plastic roHs-compliant Low stress injection Molded Plastic Lead Finish sn/Pb solder 100% matte sn MsL rating MsL1 MsL1 [1] Package Marking [3] H410 xxxx H410 xxxx [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number xxxx F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 Mixers - siNGLe & DOUBLe BALANCeD - sMT ED U IN NT T O SC DUC DI RO P v02.0607 +20 dBm +27 dBm ±4 mA -65 to +150 °C -40 to +85 °C Class 1A GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz D New r d fo e s sign e 10 HMC410MS8G / 410MS8GE Pin Descriptions Pin Number 1, 8 GND 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 2 3, 4, 6 ED U IN NT T O SC DUC DI RO P v02.0607 Function Description interface schematic Pins and exposed ground slug must be connected to rF ground. LO This pin is AC coupled & matched to 50 Ohms from 9.0 to 15.0 GHz. N/C iF This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary iF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die nonfuntcion and possible die failure will result. GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz 5 e ot R N d men com Not connected. w r Ne o ed f s sign De 7 rF This pin is DC coupled & matched to 50 Ohms from 9.0 to 15.0 GHz. 10 - 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410MS8G / 410MS8GE Evaluation PCB e ot R N d men com List of Materials for Evaluation PCB 103350 [1] item J1 - J2 J3 U1 PCB [2] Description PCB Mount sMA rF Connector, sri PCB Mount sMA Connector, Johnson HMC410Ms8G / HMC410Ms8Ge 101650 evaluation Board [1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: rogers 4350 The circuit board used in the final application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 6 Mixers - siNGLe & DOUBLe BALANCeD - sMT ED U IN NT T O SC DUC DI RO P v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz D New r d fo e s sign e 10