536LP2E

HMC536LP2 / 536LP2E v02.0409 GaAs MMIC POSITIVE CONTROL T/R SWITCH, DC - 6 GHz Typical Applications The HMC536LP2(E) is ideal for: • Cellular/PCS/3G Infrastructure • WiMAX, WiBro & Fixed Wireless • CATV/CMTS • Test Instrumentation Features Input P0.1dB: +33 dBm @ +5V Insertion Loss: 0.6 dB Positive Control: +3V or +5V Isolation: 27 dB 2x2 mm Leadless DFN SMT Package, 4 mm2 Functional Diagram General Description The HMC536LP2(E) is a DC to 6 GHz GaAs MMIC T/R switch in leadless 2x2 mm DFN LP2 surface mount packages with an exposed ground paddle. The switch is ideal for cellular, WiMAX, & WiBro access point and subscriber applications featuring low 0.6 dB insertion loss and high +54 dBm input IP3. Power handling is excellent up through 6 GHz with the switch offering a P0.1dB compression point of +29 dBm at +3V and +33 dBm at +5V control. On-chip circuitry allows positive voltage control of 0/+3V or 0/+5V at very low DC currents. The HMC536LP2(E) occupy only 4 mm2 and are ideal for applications where small size is required. 11 SWITCHES - SPDT T/R - SMT Electrical Specifi cations, TA = +25° C, Vctl = 0/+3 Vdc to +5 Vdc, 50 Ohm System Parameter Frequency DC - 3.0 GHz DC - 4.5 GHz DC - 6.0 GHz DC - 4.0 GHz 4.0 - 5.0 GHz 5.0 - 6.0 GHz DC - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 6.0 GHz (Vctl = 3V) (Vctl = 5V) 0.5 - 6.0 GHz 0.5 - 6.0 GHz 0.5 - 1.0 GHz 1.0 - 3.0 GHz 3.0 - 6.0 GHz DC - 6.0 GHz 27 31 23 26 24 Min. Typ. 0.6 0.7 1.0 27 30 29 20 20 12 29 33 54 52 49 33 70 Max. 0.9 1.0 1.3 Units dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm ns ns Insertion Loss Isolation (RFC to RF1/RF2) Return Loss Input Power for 0.1 dB Compression Input Third Order Intercept (Vctl = 3V, 5V) (Two-Tone Input Power = +7 dBm Each Tone) Switching Speed tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 11 - 144 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC536LP2 / 536LP2E v02.0409 GaAs MMIC POSITIVE CONTROL T/R SWITCH, DC - 6 GHz Insertion Loss 0 Return Loss 0 -5 RFC RF1 RF2 INSERTION LOSS (dB) RETURN LOSS (dB) 5 6 -0.5 -10 -15 -20 -25 -30 -1 -1.5 +25 C +85 C -40 C -2 0 1 2 3 4 FREQUENCY (GHz) -35 0 1 2 3 4 5 6 FREQUENCY (GHz) Isolation Between Ports RFC and RF1 / RF2 0 -5 -10 ISOLATION (dB) -15 -20 -25 -30 -35 -40 0 1 2 3 4 5 6 FREQUENCY (GHz) RF1 RF2 Isolation Between Ports RF1 and RF2 0 -5 -10 ISOLATION (dB) -15 -20 -25 -30 -35 -40 0 1 2 3 4 5 6 FREQUENCY (GHz) RF1-RF2 11 SWITCHES - SPDT T/R - SMT 11 - 145 Input 0.1 dB Compression Point INPUT 0.1dB COMPRESSION POINT (dBm) 40 38 36 34 32 30 5V 3V Input Third Order Intercept Point, Vctl = 3v 64 60 56 IP3 (dBm) 52 48 44 +25C +85C -40C 28 26 0 1 2 3 4 5 6 FREQUENCY (GHz) 40 0 1 2 3 4 5 6 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC536LP2 / 536LP2E v02.0409 GaAs MMIC POSITIVE CONTROL T/R SWITCH, DC - 6 GHz Control Voltages *Control Input Tolerances are ± 0.2V State Low High 150 °C 0.86 W Control Input 75 °C/W -65 to +150 °C -40 to +85 °C Class 1A A Low High B High Low Signal Path State RFC to: RF1 RF2 Bias Condition* 0 Vdc @ 25 μA Typical +3 Vdc to +5 Vdc @ 25 μA Typical Absolute Maximum Ratings Control Voltage Range Hot Switch Power Level (Vctl = +3V) Channel Temperature Continuous Pdiss (T = 85 °C) (derate 13.3 mW/°C above 85 °C) Thermal Resistance Storage Temperature Operating Temperature ESD Sensitivity (HBM) -0.5 to +7.5V +29 dBm Truth Table DC blocks are required at ports RFC, RF1, RF2. Choose value for lowest frequency of operation. Outline Drawing 11 SWITCHES - SPDT T/R - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC536LP2 HMC536LP2E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] 536 XXX 536 XXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 3-Digit lot number XXX 11 - 146 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC536LP2 / 536LP2E v02.0409 GaAs MMIC POSITIVE CONTROL T/R SWITCH, DC - 6 GHz Pin Descriptions Pin Number 1 Function A Description See truth and control voltage tables. Interface Schematic 3 B See truth and control voltage tables. These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. This pin should be connected to RF ground to achieve best isolation. Package bottom has exposed metal paddle that must be connected to RF/DC ground. 2, 4, 6 RFC, RF1, RF2 5 N/C GND Evaluation PCB 11 SWITCHES - SPDT T/R - SMT 11 - 147 List of Materials for Evaluation PCB 115195 [1] Item J1 - J3 J4 - J6 C1 - C3 R1 - R2 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 100 pF Capacitor, 0402 Pkg. 1K Ohm Resistor, 0402 Pkg. HMC536LP2(E) SPDT Switch 115194 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com