561LP3E

HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Features High Output Power: +14 dBm Low Input Power Drive: 0 to +6 dBm Fo Isolation: 15 dBc @ Fout= 16 GHz 100 KHz SSB Phase Noise: -139 dBc/Hz RoHS Compliant 3x3 mm SMT Package Typical Applications 7 FREQ. MULTIPLIERS - ACTIVE - SMT The HMC561LP3E are suitable for: • Clock Generation Applications: SONET OC-192 & SDH STM-64 • Point-to-Point & VSAT Radios • Test Instrumentation • Military & Space Functional Diagram General Description The HMC561LP3(E) is a x2 active broadband frequency multiplier utilizing GaAs PHEMT technology in a leadless RoHS compliant SMT package. When driven by a +5 dBm signal, the multiplier provides +14 dBm typical output power from 8 to 21 GHz and the Fo and 3Fo isolations are 15 dBc at 16 GHz. The HMC561LP3(E) is ideal for use in LO multiplier chains for Pt to Pt & VSAT Radios yielding reduced parts count vs. traditional approaches. The low additive SSB Phase Noise of -139 dBc/Hz at 100 kHz offset helps maintain good system noise performance. The RoHS packaged HMC561LP3(E) eliminates the need for wire bonding, and allows the use of surface mount manufacturing techniques. For availability on NonRoHS compliant HMC561LP3 product please contact Hittite Microwave sales directly. Electrical Specifi cations, TA = +25°C, Vdd = +5V, 5 dBm Drive Level Parameter Frequency Range, Input Frequency Range, Output Output Power Fo Isolation (with respect to output level) 3Fo Isolation (with respect to output level) 4Fo Isolation (with respect to output level) Input Return Loss Output Return Loss SSB Phase Noise (100 kHz Offset) Supply Current (Idd) (Vdd = 5V, Vgg = -1.7V Typ.) *Adjust Vgg between -2.0 and -1.2V to achieve Idd = 98 mA 11 Min. Typ. 4 - 10.5 8 - 21 14 15 15 20 16 8 -139 98 Max. Units GHz GHz dBm dBc dBc dBc dB dB dBc/Hz mA 7 - 82 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Output Power vs. Temperature @ 5 dBm Drive Level 20 Output Power vs. Drive Level 20 15 10 5 0 -5 -10 7 -2 dBm 0 dBm 2 dBm 4 dBm 6 dBm OUTPUT POWER (dBm) OUTPUT POWER (dBm) 16 12 8 +25 C +85 C -40 C 4 0 7 9 11 13 15 17 19 21 23 FREQUENCY (GHz) 7 9 11 13 15 17 19 21 23 FREQUENCY (GHz) Output Power vs. Supply Voltage @ 5 dBm Drive Level 20 Isolation @ 5 dBm Drive Level 20 15 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 16 10 5 0 -5 -10 -15 -20 -25 -30 Fo 2 Fo 3 Fo 4 Fo 12 4.5 V 5.0 V 5.5 V 8 4 0 7 9 11 13 15 17 19 21 23 FREQUENCY (GHz) -35 7 9 11 13 15 17 19 21 23 FREQUENCY (GHz) Output Power vs. Input Power 20 15 OUTPUT POWER (dBm) 10 5 0 -5 -10 -15 -20 -5 -2 1 4 7 10 INPUT POWER (dBm) 8 GHz 14 GHz 20 GHz SSB Phase Noise Performance, Fout= 16 GHz, Input Power = +3 dBm 0 SSB PHASE NOISE (dBc/Hz) -30 -60 -90 -120 -150 -180 2 10 10 3 10 4 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 83 FREQ. MULTIPLIERS - ACTIVE - SMT HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Input Return Loss vs. Temperature Output Return Loss vs. Temperature 0 +25 C +85 C -40 C 7 RETURN LOSS (dB) 0 -5 -4 FREQ. MULTIPLIERS - ACTIVE - SMT -15 -20 -25 -30 -35 -40 3 4 5 6 7 8 9 10 11 12 FREQUENCY (GHz) 25 C +85 C -40 C RETURN LOSS (dB) -10 -8 -12 -16 -20 7 9 11 13 15 17 19 21 23 FREQUENCY (GHz) Supply Current vs. Input Power 130 120 110 Idd (mA) 100 90 80 70 -10 -6 -2 2 6 10 INPUT POWER (dBm) Absolute Maximum Ratings RF Input (Vdd = +5V) Supply Voltage (Vdd) Channel Temperature Continuous Pdiss (T= 85 °C) (derate 9.8 mW/°C above 85 °C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature +10 dBm +5.5 Vdc 150 °C 635 mW 102 °C/W -65 to +150 °C -40 to +85 °C Typical Supply Current vs. Vdd Vdd (Vdc) 4.5 5.0 5.5 Idd (mA) 97 98 99 Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 7 - 84 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Outline Drawing 7 FREQ. MULTIPLIERS - ACTIVE - SMT 7 - 85 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC561LP3 HMC561LP3E Package Body Material Low Stress Injection Molded Plastic [4] RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] 561 XXXX 561 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX [4] For availability on Non-RoHS HMC561LP3 products please contact Hittite Microwave sales directly. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Pin Description 7 FREQ. MULTIPLIERS - ACTIVE - SMT Pin Number Function Description Package bottom must also be connected to RF/DC ground. Interface Schematic 1, 3, 10, 12 GND 2 RFIN Pin is AC coupled and matched to 50 Ohms. These pins are internally not connected; however, this product was specified with these pins connected to RF/ DC ground. Pin is AC coupled and matched to 50 Ohms. 4 - 9, 14, 16 N/C 11 RFOUT 13 Vdd Supply voltage 5V ± 0.5V. External bypass capacitors of 100 pF, 1,000 pF and 2.2 μF are required. 15 Vgg Gate control for multiplier. Adjust to achieve Idd of 98 mA. Please follow “MMIC Amplifier Biasing Procedure” Application note. Application Circuit Component C1, C2 C3, C4 C5, C6 Value 100 pF 1,000 pF 2.2 μF 7 - 86 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Evaluation PCB 7 FREQ. MULTIPLIERS - ACTIVE - SMT List of Materials for Evaluation PCB 115556 [1] Item J1, J2 J3 - J5 C1, C2 C3, C4 C5, C6 U1 PCB [2] Description PCB Mount SRI K Connector DC Pin 100 pF Capacitor, 0402 Pkg. 1,000 pF Capacitor, 0603 Pkg. 2.2 μF Tantalum Capacitor HMC561LP3E x2 Active Multiplier 115555 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 87