580ST89E

HMC580ST89 / 580ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 1 GHz Features P1dB Output Power: +22 dBm Gain: 22 dB Output IP3: +37 dBm Cascadable 50 Ohm I/Os Single Supply: +5V Industry Standard SOT89 Package Typical Applications 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT The HMC580ST89 / HMC580ST89E is ideal forr: • Cellular / PCS / 3G • Fixed Wireless & WLAN • CATV, Cable Modem & DBS • Microwave Radio & Test Equipment • IF & RF Applications Functional Diagram General Description The HMC580ST89 & HMC580ST89E are InGaP Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT amplifiers covering DC to 1 GHz. Packaged in an industry standard SOT89, the amplifier can be used as a cascadable 50 Ohm RF or IF gain stage as well as a PA or LO driver with up to +26 dBm output power. The HMC580ST89(E) offers 22 dB of gain with a +37 dBm output IP3 at 250 MHz, and can operate directly from a +5V supply. The HMC580ST89(E) exhibits excellent gain and output power stability over temperature, while requiring a minimal number of external bias components. Electrical Specifi cations, Vs= 5V, Rbias= 1.8 Ohm, TA = +25° C Parameter Gain Gain Variation Over Temperature Input Return Loss DC - 0.25 GHz 0.25 - 0.50 GHz 0.50 - 1.00 GHz DC - 1.0 GHz DC - 0.25 GHz 0.25 - 0.50 GHz 0.50 - 1.00 GHz DC - 0.50 GHz 0.50 - 1.00 GHz DC - 1.0 GHz DC - 0.25 GHz 0.25 - 0.50 GHz 0.50 - 1.00 GHz DC - 0.25 GHz 0.25 - 0.50 GHz 0.50 - 1.00 GHz DC - 1.0 GHz Min. 19 18.5 15 Typ. 22 21 17 0.005 35 28 19 12 11 23 22 20.5 19 37 35 33 2.8 88 110 Max. Units dB dB dB dB/ °C dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dB mA Output Return Loss Reverse Isolation Output Power for 1 dB Compression (P1dB) 19 17.5 16 Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) Noise Figure Supply Current (Icq) Note: Data taken with broadband bias tee on device output. 8 - 146 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC580ST89 / 580ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 1 GHz Broadband Gain & Return Loss 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 0 0.5 1 1.5 Gain vs. Temperature 24 20 8 +25C +85C -40C RESPONSE (dB) 12 8 4 0 2 2.5 3 0 0.25 0.5 0.75 1 1.25 1.5 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Temperature 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 -35 -40 -45 0 0.3 0.5 0.8 1 1.3 1.5 FREQUENCY (GHz) +25C +85C -40C Output Return Loss vs. Temperature 0 -5 RETURN LOSS (dB) -10 -15 +25C +85C -40C -20 -25 0 0.25 0.5 0.75 1 1.25 1.5 FREQUENCY (GHz) Reverse Isolation vs. Temperature 0 REVERSE ISOLATION (dB) -5 Noise Figure vs. Temperature 10 8 -10 -15 -20 -25 -30 -35 0 0.25 0.5 0.75 1 1.25 1.5 FREQUENCY (GHz) 0 0 0.25 0.5 0.75 1 1.25 1.5 FREQUENCY (GHz) +25C +85C -40C NOISE FIGURE (dB) 6 +25C +85C -40C 4 2 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 147 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT GAIN (dB) S21 S11 S22 16 HMC580ST89 / 580ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 1 GHz P1dB vs. Temperature Psat vs. Temperature 28 24 20 Psat (dBm) 16 12 8 4 0 +25C +85C -40C 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT P1dB (dBm) 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 0.3 0.5 0.8 +25C +85C -40C 1 1.3 1.5 0 0.25 0.5 0.75 1 1.25 1.5 FREQUENCY (GHz) FREQUENCY (GHz) Output IP3 vs. Temperature 45 Gain, Power & OIP3 vs. Supply Voltage for Constant Icc = 88 mA @ 850 MHz GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 36 32 28 24 20 16 12 8 4 0 4.5 5 Vs (V) 5.5 Gain P1dB Psat IP3 40 IP3 (dBm) 35 30 +25C +85C -40C 25 20 0 0.25 0.5 0.75 1 1.25 1.5 FREQUENCY (GHz) Vcc vs. Icc Over Temperature for Fixed Vs= 5V, RBIAS= 1.8 Ohms 94 92 90 Icc (mA) 88 86 84 82 80 78 4.82 -40C +85C ACPR vs. Channel Output Power -20 -25 -30 +25C ACPR (dBc) -35 -40 -45 -50 -55 -60 -65 WCDMA 140MHz WCDMA 400MHz CDMA2000 140MHz CDMA2000 400MHz 4.83 4.84 Vcc (V) 4.85 4.86 4.87 2 4 6 8 10 12 14 16 18 CHANNEL OUTPUT POWER (dBm) 8 - 148 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC580ST89 / 580ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 1 GHz Absolute Maximum Ratings Collector Bias Voltage (Vcc) RF Input Power (RFIN)(Vcc = +4.2 Vdc) Junction Temperature Continuous Pdiss (T = 85 °C) (derate 9 mW/°C above 85 °C) Thermal Resistance (junction to lead) Storage Temperature Operating Temperature ESD Sensitivity (HMB) +5.5 Vdc +10 dBm 150 °C 0.59 W 110 °C/W -65 to +150 °C -40 to +85 °C Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 - 149 Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-180S OR EQUIVALENT. 2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING. 3. LEAD PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC580ST89 HMC580ST89E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H580 XXXX H580 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC580ST89 / 580ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 1 GHz Pin Descriptions 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Pin Number Function Description Interface Schematic 1 IN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 OUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins and package bottom must be connected to RF/DC ground. Application Circuit Recommended Bias Resistor Values for Icc = 88 mA, Rbias = (Vs - Vcc) / Icc, Vs > +5V Supply Voltage (Vs) RBIAS VALUE RBIAS POWER RATING 6V 13 Ω ¼W 8V 36 Ω ½W Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Component Values for Key Application Frequencies with Vs = +5V Frequency (MHz) Component 50 L1 C1, C2 Rbias 270 nH 0.01 μF 0 Ohms 250 110 nH 820 pF 1.5 Ohms 400 110 nH 820 pF 1.5 Ohms 900 56 nH 100 pF 1.8 Ohms 8 - 150 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC580ST89 / 580ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 1 GHz Evaluation PCB 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 - 151 List of Materials for Evaluation PCB 116402 [1] Item J1 - J2 J3 - J4 C1, C2 C3 C4 C5 R1 L1 U1 PCB [2] Description PCB Mount SMA Connector DC Pin Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 2.2 μF Capacitor, Tantalum Resistor, 1206 Pkg. Inductor, 0603 Pkg. HMC580ST89 / HMC580ST89E 107368 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [3] Evaluation board tuned for 900 MHz operation F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com