585MS8GE

HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Typical Applications The HMC585MS8G / HMC585MS8GE are ideal for: • Basestations & Repeaters • GSM, GPRS & EDGE • CDMA & W-CDMA Features High Input IP3: +33 dBm Conversion Loss: 9 dB Low LO Drive: -2 to +4 dBm Single Supply: +5V @ 50 mA Compact MSOP Package: 14.8mm2 9 MIXERS - HIGH IP3 - SMT • Cable Modem Termination Systems Functional Diagram General Description The HMC585MS8G & HMC585MS8GE are high dynamic range passive MMIC mixers with integrated LO amplifiers in plastic surface mount 8 lead Mini Small Outline Packages (MSOP) covering an RF range of 400 MHz to 650 MHz. The LO range of 300 MHz to 750 MHz supports both high side and low side LO applications. Excellent input IP3 performance of +33 dBm for down conversion and +27 dBm for up conversion is provided for 2.5G & 3G applications at an LO drive of 0 dBm. RF conversion loss is 9 dB typical. The DC to 250 MHz IF frequency response will satisfy a wide range of Tx and Rx frequency plans. Electrical Specifi cations, TA = +25°C, LO = 0 dBm, IF = 50 MHz*, Vdd= 5V Parameter Frequency Range, RF Frequency Range, LO Frequency Range, IF Conversion Loss LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) LO Input Drive Level (Typical) Supply Current 10 30 Min. Typ. 400 - 650 300 - 750 DC - 0.25 9.0 7 15 33 22 -2 to +4 50 11 Max. Units MHz MHz GHz dB dB dB dBm dBm dBm mA *Unless otherwise noted, all measurements performed as a downconverter, with high side LO & IF = 50 MHz. 9 - 356 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Conversion Gain vs. Temperature @ LO = 0 dBm 0 Isolation @ LO = 0 dBm 10 0 CONVERSION GAIN (dB) -5 ISOLATION (dB) -10 -20 -30 -40 -50 -25 0.37 -60 0.37 RF TO IF LO TO RF LO TO IF -10 +25C +85C -40C -15 9 0.62 0.67 -20 0.42 0.47 0.52 0.57 0.62 0.67 0.42 0.47 0.52 0.57 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss @ LO = 0 dBm 0 CONVERSION GAIN (dB) -5 RETURN LOSS (dB) -5 LO RF -10 -10 -15 -20 -4dBm -2dBm 0dBm +2dBm +4dBm -15 -20 -25 0.37 0.42 0.47 0.52 0.57 0.62 0.67 -25 0.25 0.35 0.45 0.55 0.65 0.75 0.85 RF FREQUENCY (GHz) FREQUENCY (GHz) Upconverter Performance Conversion Gain @ LO = 0 dBm 0 IF Bandwidth @ LO = 0 dBm 0 CONVERSION GAIN (dB) -5 -5 -10 RESPONSE (dB) RETURN LOSS CONVERSION GAIN -10 -15 -15 -20 -25 0.37 -20 0.42 0.47 0.52 0.57 0.62 0.67 0 0.05 0.1 0.15 0.2 0.25 RF FREQUENCY (GHz) IF FREQUENCY (GHz) Unless otherwise noted, all measurements performed as a downconverter, with high side LO & IF = 50 MHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 357 MIXERS - HIGH IP3 - SMT HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Input IP3 vs. Temperature @ LO= 0 dBm 40 Input IP3 vs. LO Drive 40 35 INPUT IP3 (dBm) INPUT IP3 (dBm) 35 30 30 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 9 MIXERS - HIGH IP3 - SMT 25 + 25C - 40C + 85C 25 20 0.37 0.42 0.47 0.52 0.57 0.62 0.67 20 0.37 0.42 0.47 0.52 0.57 0.62 0.67 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Input IP2 vs. Temperature @ LO= 0 dBm 45 Input IP2 vs. LO Drive 40 40 INPUT IP2 (dBm) 35 INPUT IP3 (dBm) + 25C - 40C + 85C 35 30 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 30 25 25 0.37 0.42 0.47 0.52 0.57 0.62 0.67 20 0.37 0.42 0.47 0.52 0.57 0.62 0.67 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Input P1dB vs. Temperature @ LO= 0 dBm 30 + 25C + 85C - 40C Upconverter IP3 vs. LO Drive, IF= 50 MHz 40 28 INPUT IP3 (dBm) 35 INPUT IP3 (dBm) 26 30 24 25 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 22 20 20 0.37 0.42 0.47 0.52 0.57 0.62 0.67 15 0.37 0.42 0.47 0.52 0.57 0.62 0.67 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Unless otherwise noted, all measurements performed as a downconverter, with high side LO & IF = 50 MHz. 9 - 358 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Input IP3 vs. LO Drive, IF= 100 MHz 40 Input IP3 vs. LO Drive, IF= 150 MHz 35 35 INPUT IP3 (dBm) INPUT IP3 (dBm) 30 30 25 25 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 20 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 9 0.52 0.57 0.62 0.67 20 15 15 0.37 0.42 0.47 0.52 0.57 0.62 0.67 10 0.37 0.42 0.47 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Input IP3 vs. LO Drive, IF= 200 MHz 35 30 25 20 15 10 5 0.37 Conversion Gain vs. LO Drive, IF= 200 MHz 0 CONVERSION GAIN (dB) -5 -10 -15 LO = LO = LO = LO = LO = -4dBm -2dBm 0dBm +2dBm +4dBm -20 -4dBm -2dBm 0dBm +2dBm +4dBm 0.42 0.47 0.52 0.57 0.62 0.67 -25 0.37 0.42 0.47 0.52 0.57 0.62 0.67 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Unless otherwise noted, all measurements performed as a downconverter, with high side LO & IF = 50 MHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 359 MIXERS - HIGH IP3 - SMT INPUT IP3 (dBm) HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz MxN Spurious Outputs nLO mRF 0 1 2 0 xx 5 61 20 7 1 -4 0 63 24 8 2 26 27 50 22 -1 3 -1 22 50 27 26 4 8 24 63 0 -4 Harmonics of LO nLO Spur at RF Port LO Freq GHz 0.3 0.4 0.5 0.6 0.7 0.8 1 17 10 6 6 6 6 2 36 40 32 34 28 26 3 31 20 18 23 34 48 4 39 33 31 33 41 xx 9 MIXERS - HIGH IP3 - SMT 3 4 RF Freq = 0.5 GHz @ -10 dBm LO Freq = 0.4 GHz @ 0 dBm All values in dBc below IF power level (RF - LO). LO power = 0 dBm All values in dBc below input LO level measured at RF port. 9 - 360 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Absolute Maximum Ratings RF/IF Input LO Drive Bias Supply (Vdd) Channel Temperature Continuous Pdiss (T = 85°C) (Derate 13.2 mW/°C above 85°C) Storage Temperature Operating Temperature IF DC Current +27 dBm +10 dBm +7 Vdc 150 °C 0.85 W -65 to +150 °C -40 to +85 °C ±40 mA ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 9 MIXERS - HIGH IP3 - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Outline Drawing Package Information Part Number HMC585MS8G HMC585MS8GE Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H585 XXXX H585 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 361 HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Pin Descriptions Pin Number Function Description Interface Schematic 1 LO This pin is AC coupled and matched to 50 Ohm. 9 MIXERS - HIGH IP3 - SMT 2 N/C Not connected. 3, 6, 7 GND This pin must be connected to RF ground. 4 Vdd Power supply for LO amplifier. An external RF bypass capacitor is required. 5 IF Port This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally using a series capacitor. Choose value of capacitor to pass IF frequency desired. For operation to DC, this pin must not sink/source more than 40 mA of current or failure may result. 8 RF Port This pin is DC coupled and matched to 50 Ohm. 9 - 362 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Evaluation PCB 9 MIXERS - HIGH IP3 - SMT List of Materials for Evaluation PCB 114445 [1] Item J1 - J3 J4 - J5 C1 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 10,000 pF Chip Capacitor, 0603 Pkg. HMC585MS8G / HMC585MS8GE Mixer 104813 Evaluation Board, 1.0” x 1.0” [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 363