589ST89E

HMC589ST89 / 589ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4 GHz Typical Applications Features P1dB Output Power: +21 dBm Gain: 21 dB Output IP3: +33 dBm Single Supply: +5V Industry Standard SOT89 Package 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT The HMC589ST89 / HMC589ST89E is ideal for: • Cellular / PCS / 3G • Fixed Wireless & WLAN • CATV, Cable Modem & DBS • Microwave Radio & Test Equipment • IF & RF Applications Functional Diagram General Description The HMC589ST89 & HMC589ST89E are InGaP HBT Gain Block MMIC SMT amplifiers covering DC to 4 GHz and packaged in an industry standard SOT89. The amplifier can be used as a cascadable 50 Ohm RF or IF gain stage as well as a LO or PA driver with up to +19 dBm P1dB output power for cellular/3G, FWA, CATV, microwave radio and test equipment applications. The HMC589ST89(E) offers 20 dB gain and +33 dBm output IP3 at 1 GHz while requiring only 82 mA from a single positive supply. The HMC589ST89(E) InGaP HBT gain block offers excellent output power and gain stability over temperature. Electrical Specifi cations, Vs= 5V, Rbias= 1.8 Ohm, TA = +25° C Parameter DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz DC - 5 GHz DC - 1.0 GHz 1.0 - 4.0 GHz DC - 1.0 GHz 1.0 - 4.0 GHz DC - 4 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz DC - 2.0 GHz 2.0 - 4.0 GHz Min. 19 16 14 13 13 8 8 7 17.5 16 16 14.5 Typ. 21 19 17 15 0.008 17 11 12 10 23 21 19 19 17.5 33 32 30.5 29 4.0 4.5 82 Max. 25 23 22 20 Units dB dB dB dB dB/ °C dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dB dB mA Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Reverse Isolation Output Power for 1 dB Compression (P1dB) Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) Noise Figure Supply Current (Icq) 102 Note: Data taken with broadband bias tee on device output. 8 - 152 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC589ST89 / 589ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4 GHz Broadband Gain & Return Loss 25 20 15 RESPONSE (dB) 10 0 -5 -10 -15 -20 -25 -30 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) 5 Gain vs. Temperature 24 20 16 12 8 4 0 0 1 2 3 4 5 FREQUENCY (GHz) +25 C +85 C -40 C 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 - 153 Input Return Loss vs. Temperature 0 INPUT RETURN LOSS (dB) +25 C +85 C -40 C Output Return Loss vs. Temperature 0 +25C +85C -40C GAIN (dB) RETURN LOSS (dB) S21 S11 S22 -5 -5 -10 -10 -15 -15 -20 -20 -25 0 1 2 3 4 5 FREQUENCY (GHz) -25 0 1 2 3 4 5 FREQUENCY (GHz) Reverse Isolation vs. Temperature 0 REVERSE ISOLATION (dB) -5 -10 -15 -20 -25 -30 0 1 2 3 4 5 FREQUENCY (GHz) +25 C +85 C -40 C Noise Figure vs. Temperature 10 +25 C +85 C -40 C 8 NOISE FIGURE (dB) 6 4 2 0 0 1 2 3 4 5 FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC589ST89 / 589ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4 GHz P1dB vs. Temperature Psat vs. Temperature 28 24 20 16 12 8 4 +25 C +85 C -40 C 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT P1dB (dBm) 24 20 Psat (dBm) 4 5 16 +25 C +85 C -40 C 12 8 4 0 1 2 3 FREQUENCY (GHz) 0 1 2 3 4 5 FREQUENCY (GHz) Output IP3 vs. Temperature 40 Gain, Power & OIP3 vs. Supply Voltage @ 850 MHz, Rbias = 1.8 Ohms GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 36 32 28 24 20 16 12 8 4 0 4.5 5 Vs (Vdc) 5.5 Gain P1dB Psat IP3 36 IP3 (dBm) 32 28 +25 C +85 C -40 C 24 20 0 1 2 3 4 5 FREQUENCY (GHz) Vcc vs. Icc Over Temperature for Fixed Vs= 5V, RBIAS= 1.8 Ohms 90 88 86 84 Icc (mA) 82 80 78 76 74 72 70 4.83 4.84 4.85 4.86 -40 C 4.87 4.88 +25 C +85 C Vcc (Vdc) 8 - 154 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC589ST89 / 589ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4 GHz Absolute Maximum Ratings Collector Bias Voltage (Vcc) RF Input Power (RFIN)(Vcc = +5 Vdc) Junction Temperature Continuous Pdiss (T = 85 °C) (derate 8.4 mW/°C above 85 °C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +5.5 Vdc +10 dBm up to 1 GHz +8 dBm from 1-4 GHz 150 °C 0.546 W 119 °C/W -65 to +150 °C -40 to +85 °C Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 - 155 Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-180S OR EQUIVALENT. 2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING. 3. LEAD PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC589ST89 HMC589ST89E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H589 XXXX H589 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC589ST89 / 589ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4 GHz Pin Descriptions 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Pin Number Function Description Interface Schematic 1 IN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 OUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins and package bottom must be connected to RF/DC ground. Application Circuit Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Bias Resistor Values for Icc = 88 mA, Rbias = (Vs - Vcc) / Icc Supply Voltage (Vs) RBIAS VALUE RBIAS POWER RATING 5V 1.8 Ω 1/8 6V 13 Ω ¼W 8V 38 Ω ½W W Recommended Component Values for Key Application Frequencies Frequency (MHz) Component 50 L1 C1, C2 270 nH 0.01 μF 900 56 nH 100 pF 1900 24 nH 100 pF 2200 24 nH 100 pF 2400 15 nH 100 pF 3500 8.2 nH 100 pF 4000 8.2 nH 100 pF 8 - 156 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC589ST89 / 589ST89E v04.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4 GHz Evaluation PCB 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 - 157 List of Materials for Evaluation PCB 116405 [1] Item J1 - J2 J3 - J4 C1, C2 C3 C4 C5 R1 L1 U1 PCB [2] Description PCB Mount SMA Connector DC Pin Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 2.2 μF Capacitor, Tantalum Resistor, 1206 Pkg. Inductor, 0603 Pkg. HMC589ST89 / HMC589ST89E 108370 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [3] Evaluation board tuned for 1.9 GHz operation F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com