603MS10E

HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz 5 ATTENUATORS - SMT Typical Applications The HMC603MS10 / HMC603MS10E is ideal for: • Cellular/3G Infrastructure • ISM, MMDS • WLAN, WiMAX, & WiBro Features 0.5 dB LSB Steps to 15.5 dB Single Positive Control Per Bit ± 0.15 dB Typical Bit Error High Input IP3: +50 dBm MSOP10 SMT Package Functional Diagram General Description The HMC603MS10 & HMC603MS10E are general purpose broadband 5-bit positive control GaAs IC digital attenuators in 10 lead MSOP surface mount plastic packages. Covering 0.7 to 3.8 GHz, the insertion loss is less than 2.0 dB typical. The attenuator bit values are 0.5 (LSB), 1, 2, 4 and 8 dB for a total attenuation of 15.5 dB. Attenuation accuracy is excellent at ± 0.15 dB typical with an IIP3 of +50 dBm. Five bit control voltage inputs, toggled between 0 and +3 to +5V, are used to select each attenuation state at less than 1.0 uA each. A single Vdd bias of +3 to +5V applied through an external 5K Ohm resistor is required. Electrical Specifi cations, TA = +25° C, Vdd= +3V to +5V & Vctl= 0/Vdd (Unless Otherwise Stated) Parameter Frequency (GHz) 0.7 - 1.4 1.4 - 2.3 2.3 - 2.7 2.7 - 3.8 Min. Typical 1.3 1.7 2.2 2.7 15.5 0.7 - 1.4 1.4 - 2.3 2.3 - 2.7 2.7 - 3.8 0.7 - 2.2 2.2 - 3.8 0.7 - 3.8 0.7 - 3.8 25 18 13 12 ± (0.2 + 2% of Atten. Setting) Max. ± (0.3 + 3% of Atten. Setting) Max. 29 28 53 48 Max. 1.6 2.0 2.5 3.1 Units dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm Insertion Loss Attenuation Range Return Loss (RF1 & RF2, All Atten. States) Attenuation Accuracy: (Referenced to Insertion Loss) All States Input Power for 0.1 dB Compression Input Third Order Intercept Point (Two-tone Input Power = 0 dBm Each Tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) Vdd = 5V Vdd = 3V REF - 2 dB States 2.5 - 15.5 dB States 0.7 - 3.8 1.6 1.6 µs µs 5 - 190 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz Return Loss RF1, RF2 Insertion Loss 0 -0.5 INSERTION LOSS (dB) RETURN LOSS (dB) -1 -1.5 -2 -2.5 -3 -3.5 -4 0.5 +25 C +85 C -40 C (Only Major States are Shown) 0 -5 -10 -15 2 dB 0.5 dB I.L 5 1 dB 8 dB -20 -25 4 dB 15.5 dB 1 1.5 2 2.5 3 3.5 4 -30 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) FREQUENCY (GHz) Normalized Attenuation (Only Major States are Shown) 0 NORMALIZED ATTENUATION (dB) -3 0.3 -6 -9 -12 -15 0.9 GHz 1.9 GHz Bit Error vs. Attenuation State 0.5 3.5 GHz 2.4 GHz BIT ERROR (dB) 0.1 -0.1 -18 0.5 1 1.5 2 2.5 3 3.5 4 -0.3 0.5 3.5 6.5 9.5 12.5 15.5 FREQUENCY (GHz) ATTENUATION STATE (dB) Bit Error vs. Frequency (Only Major States are Shown) 0.6 1 dB 0.5 dB Relative Phase vs. Frequency (Only Major States are Shown) 40 RELATIVE PHASE (deg) 0.3 BIT ERROR (dB) 20 15.5 dB 8 dB 4 dB 0 0 -0.3 15.5 dB 2 dB -20 0.5, 1, 2 dB 4 dB 8 dB -0.6 0.5 1 1.5 2 2.5 3 3.5 4 -40 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 191 ATTENUATORS - SMT HMC603MS10 / 603MS10E 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz v00.0905 5 ATTENUATORS - SMT Worst Case Step Error 0.6 0.5 0.4 STEP ERROR (dB) 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 0.5 1 1.5 2 2.5 3 3.5 4 Truth Table Control Voltage Input V1 8 dB High High High High High Low Low V2 4 dB High High High High Low High Low V3 2 dB High High High Low High High Low V4 1 dB High High Low High High High Low V5 0.5 dB High Low High High High High Low Attenuation State RF1 - RF2 Reference I.L. 0.5 dB 1 dB 2 dB 4 dB 8 dB 15.5 dB Max. Atten. FREQUENCY (GHz) Any combination of the above states will provide an attenuation approximately equal to the sum of the bits selected. Bias Voltage & Current Vdd = +5.0 Vdc ± 10% Vdd (VDC) +3.0 +5.0 Idd (Typ.) (µA) 4.0 5.0 Control & Bias Voltages State Low High 0.00.20.2 Bias Condition 0 to +0.2V @ 1.0 µA Max. Vdd ± 0.2V @ 0.5 µA Max. Note: Vdd = +3V to +5V ± 0.2V Application Circuit Note: DC Blocking Capacitors C1 & C2 are required on RF1 & RF2. Choose C1 = C2 = 100 ~ 300 pF to allow lowest customer specifi c frequency to pass with minimal loss. R1= 5K Ohm is required to supply voltage to the circuit through either Pin 6 or Pin 10. 5 - 192 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz Absolute Maximum Ratings RF Input Power (0.7 - 3.8 GHz) Control Voltage (V1 - V5) Bias Voltage (Vdd) Channel Temperature Thermal Resistance Storage Temperature Operating Temperature ESD Sensitivity (HBM) +30 dBm Vdd + 0.5 Vdc +8.0 Vdc 150 °C 182 °C/W -65 to +150 °C -40 to +85 °C Class 1A 5 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC603MS10 HMC603MS10E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking H603 XXXX H603 XXXX [3] [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 193 ATTENUATORS - SMT HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz 5 ATTENUATORS - SMT Pin Descriptions Pin Number 1-5 Function V1 - V5 Description See truth table and control voltage table. Interface Schematic 6 RF2 This pin is DC coupled and matched to 50 Ohm. A blocking capacitor is required. 7-9 GND These pins must be DC grounded. 10 RF1 This pin is DC coupled and matched to 50 Ohm. A blocking capacitor is required. 5 - 194 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz Evaluation Circuit Board 5 ATTENUATORS - SMT * R2 - R6= 100 Ohm. These resistors are optional and may be used to enhance decoupling of the RF path from the control inputs. List of Materials for Evaluation PCB 112747 [1] Item J1 - J2 J3 - J8 R1 R2 - R6 C1 - C2 U1 PCB [2] Description PCB Mount SMA Connector DC Pin 5k Ohm Resistor, 0402 Pkg. 100 Ohm Resistor, 0402 Pkg. 0402 Chip Capacitor, Select Value for Lowest Frequency HMC603MS10 / HMC603MS10E Digital Attenuators 112746 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 195