683LP6CE

HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Features High input iP3: +23 dBm conversion Gain: 7.5 dB Low Lo Drive: 0 dBm High channel isolation 40 Lead 6x6mm smt Package: 36mm2 9 mixers - Downconverters - smt Typical Applications the Hmc683LP6c(e) is ideal for: • cellular/3G & Lte/wimAx/4G • Basestations & repeaters • Gsm, cDmA & oFDm • Dual Density receivers Functional Diagram General Description the Hmc683LP6c(e) is a high linearity, dual channel downconverter with integrated Lo amplifier in a 6x6 smt QFn package covering 0.7 - 1.0 GHz. excellent input iP3 performance of +23 dBm for down conversion is provided for 3G & 4G Gsm/cDmA applications at an Lo drive of 0 dBm. with an input 1 dB compression of +11 dBm, the rF port will accept a wide range of input signal levels. conversion gain is 7.5 dB typical. the 60 - 500 mHz iF frequency response will satisfy various Gsm/cDmA receive frequency plans. Electrical Specifications, TA = +25 °C, IF - 100 MHz, LO = 0 dBm Parameter Frequency range, rF Frequency range, Lo Frequency range, iF conversion Gain noise Figure (ssB) Lo to rF isolation Lo to iF isolation rF to iF isolation iP3 (input) 1 dB compression (input) channel to channel isolation Lo Drive input Level (typical) supply current (icc) [1] see Application circuit 10 15 19 5 min. Vcc1, 2 = Vcc_BAL1, 2 = Vcc_AMP1, 2 [1] = Vcc_IF1P, N = Vcc_IF2P, N = +5V, BIAS1, 2 = +2.5V typ. 700 - 1000 570 - 900 60 - 500 7.5 11 16 20 28 23 11 50 -3 to +3 420 [2] Unless otherwise noted all measurements with low side Lo & iF = 100 mHz. 520 max. Units mHz mHz mHz dB dB dB dB dB dBm dBm dB dBm mA 9-1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Single Channel: Isolation 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 0.6 Single Channel: Conversion Gain vs. Temperature 12 10 8 6 4 2 0 0.6 +25 C +85 C -40 C 9 mixers - Downconverters - smt 9-2 CONVERSION GAIN (dB) RF/IF LO/RF LO/IF 0.7 0.8 0.9 1 1.1 0.7 0.8 0.9 1 1.1 FREQUENCY (GHz) FREQUENCY (GHz) Single Channel: Conversation Gain vs. LO Drive 12 10 8 6 4 2 0 0.6 -3 dBm 0 dBm +3 dBm Single Channel: Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0.5 RF1 LO1 LO_SEL 0V LO1 LO_SEL +5V CONVERSION GAIN (dB) 0.7 0.8 0.9 1 1.1 0.6 0.7 0.8 0.9 1 1.1 FREQUENCY (GHz) FREQUENCY (GHz) Single Channel: IF Bandwidth 15 10 5 RESPONSE (dB) IF Return Loss Conversion Gain Single Channel: Input P1dB vs. Temperature 20 15 P1dB (dBm) 0 -5 -10 -15 -20 -25 0 0.1 0.2 10 5 +25 C +85 C -40 C 0.3 0.4 0.5 0 0.6 0.7 0.8 0.9 1 1.1 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Single Channel: Input IP3 vs. Temperature 30 25 20 9 mixers - Downconverters - smt Single Channel: Input IP3 vs. LO Drive 30 25 20 IP3 (dBm) 15 10 5 0 0.6 -3 dBm 0 dBm +3 dBm IP3 (dBm) 15 10 5 0 0.6 +25 C +85 C -40 C 0.7 0.8 0.9 1 1.1 0.7 0.8 0.9 1 1.1 FREQUENCY (GHz) FREQUENCY (GHz) Dual Channel: Channel to Channel Isolation [1] -20 Dual Channel: LO1 to LO2 Isolation [2] -10 -20 ISOLATION (dBc) ISOLATION (dBc) 1.1 -30 RF1 TO RF2 AT IFI RF2 TO RF1 AT IF2 -30 -40 -50 -60 -40 -50 -60 0.6 0.7 0.8 0.9 1 -70 0.7 0.8 0.9 FREQUENCY (GHz) 1 1.1 FREQUENCY (GHz) Noise Figure vs. Temperature 16 15 NOISE FIGURE (dB) 14 13 12 11 10 9 8 0.6 +25 C +85 C -40 C [1] For 900 mHz, rF1 = 900 mHz @ 0 dBm, rF2 = 901 mHz @ 0 dBm, Lo = 800 mHz @ 0 dBm, iF2 terminated with 50 ohms. channel isolation is the dBc difference at iF1 port between the fundamental tone @ 100 mHz and the leakage tone @ 101 mHz. [2] For 900 mHz, Lo1 = 800 mHz @ 0 dBm, Lo2 = 799 mHz @ 0 dBm, Lo1 is selected, rF1 = rF2 = 900 mHZ @ 0 dBm, iF2 terminated with 50 ohms. Lo1-Lo2 isolation is the dBc difference measured at the iF1 port between the fundamental tone at 100 mHz and the leakage tone @ 101 mHz. 0.7 0.8 0.9 1 1.1 FREQUENCY (GHz) 9-3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz +2RF -2LO Response vs. LO Drive [3] 60 +2RF-2LO RESPONSE (dBc) +2RF -2LO Response vs. Temperature [3] 60 +2RF-2LO RESPONSE (dBc) 9 mixers - Downconverters - smt 9-4 55 55 50 50 45 +25 C +85 C -40 C 45 -3 dBm 0 dBm +3 dBm 40 0.6 0.7 0.8 0.9 1 1.1 40 0.6 0.7 0.8 0.9 1 1.1 FREQUENCY (GHz) FREQUENCY (GHz) +3RF -3LO Response vs. Temperature [3] 80 +3RF-3LO RESPONSE (dBc) 75 70 65 60 55 50 0.6 +25 C +85 C -40 C +3RF -3LO Response vs. LO Drive [3] 80 +3RF-3LO RESPONSE (dBc) 75 70 65 60 55 50 0.6 -3 dBm 0 dBm +3 dBm 0.7 0.8 0.9 1 1.1 0.7 0.8 0.9 1 1.1 FREQUENCY (GHz) FREQUENCY (GHz) [1] referenced to rF input Power @ 0 dBm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Harmonics of LO nLo spur @ rF Port 3 22 16 59 63 94 4 28 45 82 88 94 Lo Freq. (GHz) 0.6 0.7 0.8 0.9 1.0 1.1 1 17 15 17 20 21 23 2 33 25 24 26 28 29 3 36 34 33 35 41 53 4 37 39 30 25 54 57 9 mixers - Downconverters - smt MxN Spurious @ IF Port nLo mrF 0 1 2 3 4 0 xx 34 55 88 93 1 23 0 50 57 94 2 16 38 56 82 92 rF Freq. = 0.9 GHz @ -5 dBm Lo Freq. = 0.8 GHz @ 0 dBm All values in dBc below iF power level (1rF - 1Lo). Lo = 0 dBm All values in dBc below input Lo level measured at rF port. Typical Supply Current vs. Vcc vcc 4.75 5.00 5.25 icc (A) 390 420 450 Truth Table Lo_seL (v) 0 5 Lo signal Path Lo1 Lo2 Downconverter will operate over full voltage range shown above. Absolute Maximum Ratings rF / iF input (vcc= +5v) Lo Drive (vcc= +5v) vcc (Lo or iF) channel temperature continuous Pdiss (t = 85°c) (derate 110.53 mw/°c above 85°c) thermal resistance (channel to ground paddle) storage temperature operating temperature +15 dBm +6 dBm 5.5v 12.5°c 4.42 w 9.05 °c/w -65 to 150°c -40 to +85 °c eLectrostAtic sensitive Device oBserve HAnDLinG PrecAUtions 9-5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Outline Drawing 9 mixers - Downconverters - smt 9-6 notes: 1. PAcKAGe BoDY mAteriAL: Low stress inJection moLDeD PLAstic siLicA AnD siLicon imPreGnAteD. 2. LeAD AnD GroUnD PADDLe mAteriAL: coPPer ALLoY. 3. LeAD AnD GroUnD PADDLe PLAtinG: 100% mAtte tin. 4. Dimensions Are in incHes [miLLimeters]. 5. LeAD sPAcinG toLerAnce is non-cUmULAtive. 6. PAD BUrr LenGtH sHALL Be 0.15mm mAx. PAD BUrr HeiGHt sHALL Be 0.25mm mAx. 7. PAcKAGe wArP sHALL not exceeD 0.05mm 8. ALL GroUnD LeADs AnD GroUnD PADDLe mUst Be soLDereD to PcB rF GroUnD. 9. reFer to Hittite APPLicAtion note For sUGGesteD PcB LAnD PAttern. Package Information Part number Hmc683LP6c Hmc683LP6ce Package Body material Low stress injection molded Plastic roHs-compliant Low stress injection molded Plastic Lead Finish sn/Pb solder 100% matte sn msL rating msL1 msL1 [1] Package marking [3] H683 xxxx H683 xxxx [2] [1] max peak reflow temperature of 235 °c [2] max peak reflow temperature of 260 °c [3] 4-Digit lot number xxxx For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz 9 mixers - Downconverters - smt Pin Descriptions Pin number 1, 10 Function rF1, rF2 Description these are the rF inputs of the mixers. see application circuit for the off-chip matching components these are the center taps of the internal rF baluns. connect these pins to the Ac ground via external capacitors. see application circuit. these pins must be connected to rF ground. interface schematic 2, 9 3, 5, 8, 15, 16, 22, 23, 26 - 29, 35, 36 tAP1, tAP2 GnD 4, 7 BiAs1, BiAs2 Bias pins for mixer cores. see application circuit for the nominal value. 6, 17, 18, 24, 33, 34 vcc1, vcc_BAL2, vcc_AmP2, vcc2, vcc_AmP1, vcc_BAL1 Power supply voltage pins. see application circuit for bypass capacitors required. 11, 20, 31, 40 n/c no connection required. these pins may be connected to rF GnD without affecting performance. current source inductors for iF amplifiers. 12, 39 inD1, inD2 13, 14, 38, 37 iF2P, iF2n, iF1P, iF1n Differential iF outputs and Dc bias for iF amplifiers. 19, 32 BiAs_ADJ1, BiAs_ADJ2 Adjusts Lo buffer amplifies current via external resistor. see application circuit. 21, 30 Lo2, Lo1 these are Lo inputs of the mixers. see application circuit for off-chip matching components. 25 Lo_seL control voltage for Lo1 or Lo2 selection. Lo1 is selected when Lo seL is set low. Lo2 is selected when Lo seL is set high. see application circuit and truth table for low and high voltage levels. 9-7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Evaluation PCB 9 mixers - Downconverters - smt the circuit board used in the final application should use rF circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 9-8 HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz 9 mixers - Downconverters - smt List of Materials for Evaluation PCB 119926 [1] item J1 - J6 J7 - J10 L1, L2 L3 - L6 L7, L8 L9, L10 c7, c8, c26, c38 c9, c10 c11, c17, c19, c24, c27, c29, c34, c37, c40, c48, c50 c12, c15, c16, c18, c20, c25, c28, c30, c35, c36, c39, c47, c49 c13, c14, c60 - c63 c21, c22, c32, c33 c51 - c59 r7, r8 t1, t2 U1 PcB [2] Description PcB mount smA connector 2mm vertical molex 8pc connector 51 nH inductor, 0603 Pkg. 390 nH inductor, 0603 Pkg. 5.1 nH inductor, 0402 Pkg. 3.6 nH inductor, 0402 Pkg. 22 pF capacitor, 0402 Pkg. 10 nF capacitor, 0603 Pkg. 1 nF capacitor, 0402 Pkg. 0.1 µF capacitor, 0603 Pkg. 100 pF capacitor, 0402 Pkg. 0.01 µF capacitor, 0402 Pkg. 0.47 µF capacitor, 0603 Pkg. 330 ohm resistor, 0603 Pkg. 1:1 transformer - tyco etc1-it Hmc683LP6c(e) 118274 evaluation PcB [1] reference this number when ordering complete evaluation PcB [2] circuit Board material: Arlon-25Fr adn Fr4 9-9 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Application Circuit 9 mixers - Downconverters - smt For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 9 - 10