HMC-C009_1

HMC-C009 v03.1007 GaAs MMIC I/Q MIXER MODULE 4.0 - 8.5 GHz 12 CONNECTORIZED MODULES - MIXERS Features Wide IF Bandwidth: DC - 3.5 GHz Image Rejection: 35 dB LO to RF Isolation: 40 dB High Input IP3: +23 dBm Hermetically Sealed Module l A li ti Typical Applications The HMC-C009 is ideal for: • Telecommunications Equipment • Test Equipment • Military Radios, Radar & ECM • Space Systems Field Replaceable SMA Connectors -55 to +85 °C Operating Temperature General Description The HMC-C009 is a passive I/Q MMIC mixer housed in a miniature hermetic module which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The module utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated on a GaAs MESFET process. This MMIC based module is a more reliable and consistent alternative to hybrid style I/Q Mixers and Single Sideband Converter assemblies. The module features removable SMA connectors which can be detached to allow direct connection of the modules I/O pins to a microstrip or coplanar circuit. Functional Diagram Electrical Specifi cations, TA = +25° C, IF= 100 MHz, LO = +15 dBm* Parameter Frequency Range, RF/LO Frequency Range, IF Conversion Loss (As IRM) Image Rejection 1 dB Compression (Input) LO to RF Isolation LO to IF Isolation IP3 (Input) Amplitude Balance Phase Balance 32 14 22 Min. Typ. 4.0 - 8.5 DC - 3.5 7.5 35 +14 40 20 +23 0.3 8 35 15 10.5 28 Max. Min. Typ. 5.5 - 7.5 DC - 3.5 7.5 34 +15 40 20 +23 0.2 6 9.5 Max. Units GHz GHz dB dB dBm dB dB dBm dB Deg * Unless otherwise noted, all measurements performed as downconverter. 12 - 46 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C009 v03.1007 GaAs MMIC I/Q MIXER MODULE 4.0 - 8.5 GHz Data taken As IRM With External IF Hybrid Conversion Gain vs. Temperature 0 Image Rejection vs. Temperature 50 12 CONNECTORIZED MODULES - MIXERS 12 - 47 CONVERSION GAIN (dB) -5 IMAGE REJECTION (dB) 40 30 -10 20 +25C +85C -55C -15 +25C +85C -55C 10 -20 3 4 5 6 7 8 9 RF FREQUENCY (GHz) 0 3 4 5 6 7 8 9 RF FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss 0 CONVERSION GAIN (dB) -5 RETURN LOSS (dB) -5 -10 RF LO -10 +11dBm +13dBm +15dBm +17dBm +19dBm -15 -15 -20 -20 3 4 5 6 7 8 9 RF FREQUENCY (GHz) -25 3 4 5 6 7 8 9 FREQUENCY (GHz) Input P1dB vs. Temperature 20 18 16 P1dB (dBm) Input IP3 vs. LO Drive 30 25 20 14 12 10 8 6 3 4 5 6 7 8 9 RF FREQUENCY (GHz) +25C +85C -55C IP3 (dBm) 15 10 5 0 3 4 5 6 7 8 9 RF FREQUENCY (GHz) LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C009 v03.1007 GaAs MMIC I/Q MIXER MODULE 4.0 - 8.5 GHz 12 CONNECTORIZED MODULES - MIXERS Quadrature Channel Data Taken Without IF Hybrid Isolations 0 IF Bandwidth* 0 CONVERSION GAIN RETURN LOSS -10 ISOLATION (dB) RESPONSE (dB) 8 9 LO/IF2 -20 LO/IF1 -30 RF/IF1 -40 LO/RF -50 3 4 5 6 7 RF FREQUENCY (GHz) RF/IF2 -5 -10 -15 -20 -25 0.5 1 1.5 2 2.5 3 3.5 IF FREQUENCY (GHz) Amplitude Balance vs. LO Drive 2 1.5 1 0.5 0 -0.5 -1 -1.5 -2 3 4 5 6 7 8 9 RF FREQUENCY (GHz) LO = +13dBm LO = +15dBm LO = +17 dBm LO = +19 dBm Phase Balance vs. LO Drive 10 5 0 -5 -10 -15 -20 3 4 5 6 7 8 9 RF FREQUENCY (GHz) LO = +13dBm LO = +15dBm LO = +17 dBm LO = +19 dBm Upconverter Performance Conversion Gain vs. LO Drive* 0 Upconverter Performance Sideband Rejection vs. LO Drive* 0 SIDEBAND REJECTION (dBc) -10 -20 -30 -40 -50 -60 LO = +11 dBm LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm CONVERSION GAIN (dB) -5 -10 LO = +11 dBm LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -15 -20 3 4 5 6 7 8 9 RF FREQUENCY (GHz) PHASE BALANCE (degrees) AMPLITUDE BALANCE (dB) 3 4 5 6 7 8 9 RF FREQUENCY (GHz) * Conversion gain data taken with external IF hybrid 12 - 48 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C009 v03.1007 GaAs MMIC I/Q MIXER MODULE 4.0 - 8.5 GHz Harmonics of LO nLO Spur at RF Port LO Freq. (GHz) 1 3.5 4.5 5.5 6.5 7.5 8.5 41 43 46 44 43 44 2 54 43 57 60 66 65 3 59 59 52 71 69 69 4 57 58 71 60 62 70 mRF 0 1 2 3 4 0 xx 35 94 95 90 1 -10 0 64 97 93 2 35 45 72 99 95 3 25 54 67 84 97 4 51 74 95 97 106 MxN Spurious Outputs nLO 12 CONNECTORIZED MODULES - MIXERS 12 - 49 RF = 5.6 GHz @ -10 dBm LO = 5.5 GHz @ +15 dBm Data taken without IF hybrid All values in dBc below IF power level LO = +15 dBm Values in dBc below input LO level measured at RF Port. Data taken with IF ports terminated in 50 Ohms. Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature +20 dBm +27 dBm -65 to +150 °C -55 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C009 v03.1007 GaAs MMIC I/Q MIXER MODULE 4.0 - 8.5 GHz 12 CONNECTORIZED MODULES - MIXERS Outline Drawing Package Information Package Type Package Weight [1] Spacer Weight [1] Includes the connectors [2] ±1 gms Tolerance C-4 20 gms [2] 2.6 gms [2] NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™ 2. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 3. SPACER MATERIAL: NICKEL PLATED ALUMINUM 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES ±0.010 [0.25] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602-5CCSF OR EQUIVALENT. 12 - 50 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C009 v03.1007 GaAs MMIC I/Q MIXER MODULE 4.0 - 8.5 GHz Pin Descriptions Pin Number 1 Function RF Description This pin is AC coupled and matched to 50 Ohms. This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/ sink more than 3mA of current or part non-function and possible part failure will result. This pin is AC coupled and matched to 50 Ohms. Interface Schematic 12 CONNECTORIZED MODULES - MIXERS 12 - 51 2 IF1 3 IF2 4 LO For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com