HMC-C010

HMC-C010 v00.0505 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz 9 PHASE SHIFTERS - CONNECTORIZED MODULES Features Wide Bandwidth: 6 - 15 GHz >600° Phase Shift Single Positive Voltage Control Hermetically Sealed Module Field Replaceable SMA Connectors -55 to +85 °C Operating Temperature Typical Applications The HMC-C010 is ideal for: • Fiber Optics • Military • Test Equipment General Description The HMC-C010 is an Analog Phase Shifter which is controlled via an analog control voltage from 0 to +5V. The HMC-C010 provides a continuously variable phase shift of 0 to 800 degrees at 6 GHz, and 0 to 450 degrees at 16 GHz, with consistent insertion loss versus phase shift. The phase shift is monotonic with respect to control voltage. The control port has a modulation bandwidth of 50 MHz. The low insertion loss and extremely robust packaging enable this part to be used in a wide range of applications including the phase adjustment of clocks in fiber optic systems and test equipment. The HMC-C010 is housed in a miniature hermetic module with replaceable SMA connectors. Functional Diagram Electrical Specifications, TA = +25° C, 50 Ohm System Parameter Phase Shift Range: Insertion Loss Return Loss (Input and Output) Control Voltage Range Modulation Bandwidth Phase Voltage Sensitivity Insertion Phase Temperature Sensitivity Frequency (GHz) 6 - 10 GHz 10 - 15 GHz 6 - 15 GHz 6 - 15 GHz 6 - 15 GHz 6 - 15 GHz 6 - 15 GHz 6 - 15 GHz Min. 600 360 Typ. 800 600 7 7 0-5 50 120 0.5 10 Max. Units degrees degrees dB dB Volt MHz deg /Volt deg /°C 9 - 80 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C010 v00.0505 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz Insertion Loss vs. Control Voltage 0 -1 INSERTION LOSS (dB) -2 -3 -4 -5 -6 -7 -8 -9 -10 0 0.5 1 1.5 2 2.5 Vctl (Vdc) 3 3.5 4 4.5 5 +25C +85C -55C Phase Shift vs. Control Voltage NORMALIZED PHASE SHIFT (degrees) 900 800 700 600 500 400 300 200 100 0 0 0.5 1 1.5 2 2.5 Vctl (Vdc) 3 3.5 4 4.5 5 6 GHz 11 Ghz 15 GHz 9 PHASE SHIFTERS - CONNECTORIZED MODULES 9 - 81 Phase Shift vs. Frequency @ Vctl = 5V (Relative to Vctl = 0V) NORMALIZED PHASE SHIFT (degrees) 900 800 Insertion Loss vs. Frequency 0 -2 INSERTION LOSS (dB) -4 -6 -8 -10 -12 -14 -16 -18 -20 0V 1V 2V 3V 4V 5V 700 600 500 400 300 200 100 0 5 6 7 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) +25C +85C -55C 5 6 7 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) Input Return Loss vs. Frequency, Vctl = 0 to +5V 0 Output Return Loss vs. Frequency, Vctl = 0 to +5V 0 RETURN LOSS (dB) -10 RETURN LOSS (dB) 5 6 7 8 9 10 11 12 13 14 15 16 -5 -5 -10 -15 -15 -20 FREQUENCY (GHz) -20 5 6 7 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C010 v00.0505 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz 9 PHASE SHIFTERS - CONNECTORIZED MODULES Second Harmonics vs. Control Voltage, Pin = -10 dBm 90 80 2nd HARMONICS (dBc) 70 60 50 40 30 20 10 0 0 1 2 Vctl (Vdc) 3 4 5 6 GHz 11 GHz 15 Ghz Input IP3 vs. Control Voltage 35 30 INPUT IP3 (dBm) 25 20 15 10 5 0 0 1 2 Vctl (Vdc) 3 4 5 6 GHz 11 GHz 15 Ghz Insertion Loss vs. Pin @ 7 GHz 0 -1 INSERTION LOSS (dB) Insertion Loss vs. Pin @ 11 GHz 0 -1 INSERTION LOSS (dB) -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -15 -10 -5 0 5 0V 2V 5V -2 -3 -4 -5 -6 -7 -8 -9 0V 2V 5V 10 15 20 25 -10 -15 -10 -5 0 5 10 15 20 25 INPUT POWER (dBm) INPUT POWER (dBm) Insertion Loss vs. Pin @ 15 GHz 0 -1 INSERTION LOSS (dB) -2 -3 -4 -5 -6 -7 -8 -9 -10 -15 -10 -5 0 5 10 15 20 25 0V 2V 5V Phase Shift vs. Pin @ 7 GHz NORMALIZED PHASE SHIFT (degrees) 50 45 40 35 30 25 20 15 10 5 0 -5 -10 -20 -15 -10 -5 0 5 0V 2V 5V INPUT POWER (dBm) INPUT POWER (dBm) 9 - 82 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C010 v00.0505 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz Phase Shift vs. Pin @ 11 GHz NORMALIZED PHASE SHIFT (degrees) 20 Phase Shift vs. Pin @ 15 GHz NORMALIZED PHASE SHIFT (degrees) 5 4 3 2 1 0 -1 -2 -3 -4 -5 -20 -15 -10 -5 0 5 0V 2V 5V 9 PHASE SHIFTERS - CONNECTORIZED MODULES 9 - 83 15 0V 2V 5V 10 5 0 -5 -20 -15 -10 -5 0 5 INPUT POWER (dBm) INPUT POWER (dBm) Absolute Maximum Ratings Control Voltage (Vctl) Input Power (RFin) Channel Temperature (Tc) Continuous Pdiss (T = 85 °C) (derate 21 mW/°C above 85 °C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) -1 Vdc to +8 Vdc +25 dBm 150 °C 1.36 W 48 °C/W -65 to +150 °C -55 to +85 °C Class 1B For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C010 v00.0505 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz 9 PHASE SHIFTERS - CONNECTORIZED MODULES Outline Drawing NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™ 2. BRACKET MATERIAL: ALUMINUM 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602 - 5CCSF OR EQUIVALENT. 7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80 HARDWARE WITH DESIRED MOUNTING SCREWS. 9 - 84 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C010 v00.0505 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz Pin Descriptions Pin Number Function Description Interface Schematic 9 RF input connector, SMA female, field replaceable. This pin is DC blocked and matched to 50 Ohms from 6 - 15 GHz. 1 RFIN & RF Ground 2 RFOUT & RF Ground RF output connector, SMA female, field replaceable. This pin is DC blocked and matched to 50 Ohms from 6 - 15 GHz. 3 Vctl Phase shift control pin. Application of a voltage between 0 and 5 volts causes the transmission phase to change. The DC equivalent circuit is a series connected diode and resistor. GND Power supply ground. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 85 PHASE SHIFTERS - CONNECTORIZED MODULES