HMC-C019

HMC-C019 v00.0306 HIGH ISOLATION SPST SWITCH MODULE, DC - 20.0 GHz Features High Isolation: 100 dB up to 4 GHz 65 dB up to 20 GHz Low Insertion Loss: 3.5 dB @ 10 GHz 4.0 dB @ 16 GHz Fast Switching RF Pulse Modulator 9 SWITCHES - CONNECTORIZED MODULES Typical Applications The HMC-C019 is ideal for: • Basestation Infrastructure • Fiber Optics & Broadband Telecom • Microwave Radio & VSAT • Military Radios, Radar, & ECM • Test Instrumentation Non-Reflective Topology Hermetically Sealed Module Field Replaceable SMA connectors -55 to +85 °C Operating Temperature General Description The HMC-C019 is a high speed, high isolation GaAs MESFET SPST switch housed in a miniature hermetic module with field replaceable SMA connectors. Covering DC to 20 GHz, the switch features 100 dB isolation up to 4 GHz and 65 dB isolation up to 20 GHz. CMOS interface allows a positive +5V bias voltage at very low DC currents. This non-reflective switch exhibits very fast switching speeds, with very low switching transients making it ideal for high speed RF pulse modulation applications. Functional Diagram Electrical Specifications TA = +25° C, With VDC1, VDC2 = +5V & 0/+5V Control, 50 Ohm System Parameter Insertion Loss Frequency DC - 4.0 GHz DC - 16.0 GHz DC - 20.0 GHz DC - 4.0 GHz DC - 10.0 GHz DC - 16.0 GHz DC - 20.0 GHz “On State & Off State” DC - 12.0 GHz DC - 20.0 GHz 0.5 - 20.0 GHz 0.5 - 10.0 GHz 0.5 - 20.0 GHz DC - 20 GHz DC - 20 GHz 20 90 75 70 60 Min. Typ. 3.0 4.0 6.0 100 80 75 65 12 8 23 45 43 2.5 8.5 20 Max. 3.3 4.5 8.0 Units dB dB dB dB dB dB dB dB dB dBm dBm dBm ns ns mVpp Isolation Return Loss RF1 & RF2 Input Power for 1 dB Compression Input Third Order Intercept (Two-Tone Input Power= +7 dBm Each Tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) Switching Transients 9 - 106 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C019 v00.0306 HIGH ISOLATION SPST SWITCH MODULE, DC - 20.0 GHz Insertion Loss 0 -1 INSERTION LOSS (dB) -2 Isolation 0 -20 ISOLATION (dB) -40 -60 -80 +25 C +85 C -55 C 9 SWITCHES - CONNECTORIZED MODULES 9 - 107 -3 -4 -5 -6 -7 -8 -9 -10 0 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) +25 C +85 C -55 C -100 -120 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 -35 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) RF1 ON RF1 OFF RF2 ON RF2 OFF 0.1 and 1dB Input Compression Point 30 INPUT P1dB AND P0.1dB (dBm) 25 20 15 P1dB P0.1dB 10 0 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) Input Third Order Intercept Point 55 50 INPUT IP3 (dBm) 45 40 35 30 25 0 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) +25 C +85 C -55 C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C019 v00.0306 HIGH ISOLATION SPST SWITCH MODULE, DC - 20.0 GHz 9 SWITCHES - CONNECTORIZED MODULES Absolute Maximum Ratings RF Input Power Supply Voltage (VDC1, VDC2) Control Voltage Range (Vctl1, Vctl2) Hot Switch Power Level Storage Temperature Operating Temperature +27 dBm +7 Vdc -0.5V to Vdd +0.5V +23 dBm -65 to +150 °C -55 to +85 °C Control Voltages Vctl1 & Vctl2 State High Low Bias Condition +3.5 to VDC @ 1 mA Typ. 0 to +1.5V @ 20 μA Typ. Truth Table Control Input (Vctl1 & Vctl2) RF1 to RF2 Path On Off High Low ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Bias Voltage & Current VDC Range = +5 Vdc ± 10% VDC1 & VDC2 (Vdc) +5.0 IDC ( Typ.) (mA) 2.8 (Bias current increases with switching rate to 15 - 20 mA.) 9 - 108 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C019 v00.0306 HIGH ISOLATION SPST SWITCH MODULE, DC - 20.0 GHz Outline Drawing 9 SWITCHES - CONNECTORIZED MODULES NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR TM 2. BRACKET MATERIAL: ALUMINUM 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES .005 [0.13] UNLESS OTHERWISE SPECIFIED 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602-5CCSF OR EQUIVALENT. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 109 HMC-C019 v00.0306 HIGH ISOLATION SPST SWITCH MODULE, DC - 20.0 GHz 9 SWITCHES - CONNECTORIZED MODULES Pin Descriptions Pin Number Function Description RF connector, SMA female, field replaceable. These pins are DC coupled and matched to 50 Ohms. DC blocking capacitors are required if external RF line potential is not equal to 0V. Interface Schematic 1, 5 RF1, RF2 2, 6 GND Power supply ground. 3, 7 Vctl1, Vctl2 CMOS interface, control voltages per table. Requires active pullup to +5V. 4, 8 VDC1, VDC2 Supply voltage (+5V ±10%) 9 - 110 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C019 v00.0306 HIGH ISOLATION SPST SWITCH MODULE, DC - 20.0 GHz Notes: 9 SWITCHES - CONNECTORIZED MODULES For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 111