HMC-C071

HMC-C071 v01.0609 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 20 GHz Features High Isolation: >42 dB up to 12 GHz >32 dB up to 20 GHz Low Insertion Loss: 2 dB @ 2 GHz 2.8 dB @ 12 GHz Fast Switching: 17 ns Rise/Fall Times Typical Applications The HMC-C071 is ideal for: • Fiber Optics & Broadband Telecom • Microwave Radio & VSAT • Military Radios, Radar, & ECM • Test Instrumentation Non-Reflective Design Hermetically Sealed Module Field Replaceable SMA connectors -55 to +85 °C Operating Temperature General Description The HMC-C071 is a general purpose broadband high isolation non-reflective GaAs pHEMT SP4T switch housed in a miniature hermetic module with field replaceable SMA connectors. Covering DC to 20 GHz, the switch offers high isolation and low insertion loss. The switch features >42 dB isolation up to 12 GHz and >32 dB isolation up to 20 GHz. The HMC-C071 also provides 2.8 dB insertion loss up to 12 GHz with very fast rise and fall times of 17ns. A CMOS interface allows a single +5V bias voltage at very low DC currents. 8 SWITCHES Functional Diagram Electrical Specifi cations, TA = +25° C, With Vdc = +5V & 0/+5V Control, 50 Ohm System Parameter Insertion Loss Frequency DC - 6 GHz DC - 12 GHz DC - 20 GHz DC - 6 GHz DC - 12 GHz DC - 20 GHz “On State” “Off State” DC - 12 GHz DC - 20 GHz DC - 12 GHz DC - 20 GHz 0.5 - 20 GHz 0.5 - 20 GHz 20.5 36.5 46 36 32 Min. Typ. -2.7 -2.8 -3.5 48 42 37 12 10 15 10 24 40 17 130 Max. -3.0 -3.2 -3.9 Units dB dB dB dB dB dB dB dB dB dB dBm dBm ns ns Isolation Return Loss Return Loss RF1, RF2 Input Power for 1 dB Compression Input Third Order Intercept (Two-Tone Input Power= +7 dBm Each Tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 20 GHz 8 - 18 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C071 v01.0609 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 20 GHz Insertion Loss 0 Return Loss RFC 0 -5 + 25 C + 85 C - 55 C INSERTION LOSS (dB) -5 RETURN LOSS (dB) 20 25 -10 -15 -20 -25 -10 + 25 C + 85 C - 55 C -15 0 5 10 15 FREQUENCY (GHz) -30 0 5 10 15 20 25 FREQUENCY (GHz) Return Loss RF1, RF2, RF3, RF4 On 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0 5 10 15 20 25 FREQUENCY (GHz) + 25 C + 85 C - 55 C Return Loss RF1, RF2, RF3, RF4 Off 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0 5 10 15 20 25 FREQUENCY (GHz) + 25 C + 85 C - 55 C 8 SWITCHES Isolations 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 -70 0 5 10 15 20 25 FREQUENCY (GHz) Isolation Between Ports RF1 and RF2 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 -70 0 5 10 15 20 25 FREQUENCY (GHz) RF1 to RF2 Isolation, RF3 On RF2 to RF3 Isolation, RF1 On + 25 C + 85 C - 55 C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 19 HMC-C071 v01.0609 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 20 GHz Input P1dB Compression Point 27 Input Third Order Intercept Point 45 24 P1dB (dBm) IP3 (dBm) + 25 C + 85 C - 55 C 40 21 35 18 30 + 25 C + 85 C - 55 C 15 0 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) 25 0 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) 8 SWITCHES Absolute Maximum Ratings RF Input Power Supply Voltage (Vdc) Control Voltage Range (Vctl) Storage Temperature Operating Temperature +24 dBm +7V -0.5V to Vdc +1V -65 to +150 °C -55 to +85 °C Control Voltages State High Low Bias Condition +3.0 to Vdc @ 1 mA Typ. 0 to +1.5V @ 20 μA Typ. Truth Table Control Input Signal Path State VCTL2 LOW HIGH LOW HIGH RFC to: RF1 RF2 RF3 RF4 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS VCTL1 LOW LOW HIGH HIGH Bias Voltage & Current Vdc Range = +5 Vdc ± 10% Vdc (V) +5.0 Idc (Typ.) (mA) 1.4 (Bias current increases with switching rate to 15 - 20 mA.) 8 - 20 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C071 v01.0609 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 20 GHz Pin Descriptions Pin Number 1 Function GND Description Power supply ground. Interface Schematic 2, 3 Vctl1, 2 CMOS interface, control voltages per table. Requires active pull up to +5V (Vdc). 4 Vdc Supply voltage RF connector, SMA female, field replaceable. These pins are DC coupled and matched to 50 Ohms. DC blocking capacitors are required if external RF line potential is not equal to 0V. 5-9 RFC, RF1, RF2, RF3, RF4 8 SWITCHES For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 21 HMC-C071 v01.0609 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 20 GHz Outline Drawing 8 SWITCHES Package Information Package Type C-15 NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™ 2. FINISH: GOLD PLATE OVER NICKEL PLATE 3. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. TOLERANCES: 4.1 .XX = ±.02 [.51] 4.2 .XXX = ±.010 [.25] 5. MARK LOT NUMBER ON .080 X .250 LABEL WHERE SHOWN, WITH .030 MIN TEXT HEIGHT. 6. MOUNTING SPACER PART NUMBER: 123811. 8 - 22 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C071 v01.0609 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 20 GHz Notes: 8 SWITCHES For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 23