HMC-PC10

HMC-T2240 Synthesized Signal Generator, 10 MHz to 40 GHz 2 0 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at TE@hittite.com HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz v01.0710 Wide Frequency Range, 10 MHz to 40 GHz Signal Generator! 9 The HMC-T2240 is an easy to implement test equipment solution designed to fulfill your signal generation needs. Built on a foundation of high quality and market leading Hittite MMICs, the HMC-T2240 provides the highest output power, lowest harmonic levels and broadest frequency range amongst signal generators of its size and cost. This compact and lightweight signal generator also features USB, GPIB and Ethernet interfaces ensuring carefree integration within various test environments while improving overall productivity and equipment utilization. Applications  ATE  Test & Measurement  R&D Laboratories Advantages SYNTHESIZED SIGNAL GENERATOR  Versatile: Higher Drive Simplifies Test Set-Ups  Efficient: 500 μs Frequency Switching  Reliable: Incorporates Hittite MMICs  Flexible: Manual or Software Control Via USB, GPIB or Ethernet Performance  High Output Power: +29 dBm @ 1 GHz  Wide Frequency Range: 10 MHz to 40 GHz  Excellent Phase Noise Performance: -96 dBc/Hz @ 10 kHz Offset @ 10 GHz  Spurious Rejection: -65 dBc @ 10 GHz  Power Resolution: 0.1 dB  Frequency Resolution: 1 Hz 9-2 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at TE@hittite.com HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz v01.0710 Frequency Accuracy: As Per Internal Ref. ±2 ppm Resolution: 1 Hz Internal Reference: 10 MHz Aging Rate: 60 dB Resolution: 0.1 dB Power Accuracy: ±1 dB for leveled outputs 1e+2 1e+3 1e+4 1e+5 1e+6 1e+7 FREQUENCY OFFSET (Hz) Spurious @ 10 dBm Output < -60 dBc @ Integer Frequencies < -45 dBc @ Fractional Frequencies Harmonics Frequency (GHz) 0.01 0.05 0.1 0.5 1 2 5 10 15 20 25 2nd Harmonics (dBc) -20 -36 -21 -27 -30 -30 -38 -29 -27 -42 -26 3rd Harmonics (dBc) -36 -41 -31 -38 -49 -52 -56 -55 -44 - SSB Phase Noise (dBc/Hz) Frequency (GHz) 0.01 0.10 0.50 1 5 10 15 20 25 30 40 Offset From Carrier 10 Hz -79 -88 -85 -87 -72 -61 -60 -51 -55 -53 -50 100 Hz -89 -95 -93 -89 -75 -64 -62 -60 -63 -65 -59 1 kHz -100 -103 -117 -111 -96 -90 -87 -84 -78 -82 -78 10 kHz 100 kHz 1 MHz 10 MHz -106 -110 -122 -116 -102 -96 -92 -90 -83 -87 -84 -102 -104 -120 -114 -98 -92 -90 -86 -82 -85 -81 -126 -128 -135 -134 -123 -117 -110 -111 -99 -105 -105 -140 -140 -136 -146 -145 -142 -133 -136 -126 -120 -126 Output Noise: Floor < -155 dBc/Hz Output Power = +10 dBm Above data is typical performance at +25°C after 30 minutes of warm-up time unless otherwise stated. 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at TE@hittite.com 9-3 SYNTHESIZED SIGNAL GENERATOR HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz v01.0710 General Specifi cations 9 Power - AC: 100 to 240 VAC @ 50 to 60 Hz Calibration: 1 Year Environment (for indoor use only): 0 to 35 °C Cooling: 2 Internal Fans Input / Output: 10 MHz REFOUT [1] 10 MHz REFIN [2] TRIGGER IN [3]: TTL TRIGGER OUT [3]: TTL RS-232 (used for field upgrades) Ethernet GPIB USB 1.1/2.0 RF Output 2.92mm Female Mechanical Vibration & Shock: MIL-STD 810 Table 415.5 C-VII MIL-STD 202 MTD 214 1.5G Compliance [4]: CSA & CE General Mechanical Characteristics H: 76.2 mm (3 in) W: 203 mm (8 in) D: 305 mm (12 in) Weight 3.2 kg (7 lbs) Warranty: 1 Year Parts and Labor [1] +10 dBm typ. into 50 Ohms; BNC Connector [2] -5 dBm min. 50 Ohms; BNC Connector [3] The trigger input can be driven from either 3.3V or 5V sources for direct interface with TTL signal levels; BNC Connector [4] Testing in Process Two Tone Third Order Intercept Test Set-up SYNTHESIZED SIGNAL GENERATOR HMC-T2240 I/O CONTROL HMC-T2240 Spectrum Analyzer HMC-T2240 RF RFIN DUT LO IF Device Under Test • Amplifiers • Mixers & Converters • Modulators • RFICs & Subsystems Efficient Mixer Conversion Loss, Isolation & MxN Spurious Test Set-up Device Under Test • Single or Double-Balanced Mixers • Up/Down Converters • I/Q Mixers LO IF HMC-T2240 I/O CONTROL DUT HMC-T2240 RF Spectrum Analyzer RFIN 9-4 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at TE@hittite.com HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz v01.0710 HMC-T2240 Rear Panel I/O Connections 9 Connectivity & Control Remote Interface Hardware: USB (Windows XP®, Windows 7®, Windows Vista® Drivers Supplied), GPIB or Ethernet Software: LabVIEW 2009 Driver Frequency Switching Speed: 500 us Typ. Local Interface Front Panel Rotary Knob & Display Windows ® - Windows XP ® , Windows 7 ® and Windows Vista ® are registered trademarks of Microsoft Corporation. 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at TE@hittite.com 9-5 SYNTHESIZED SIGNAL GENERATOR Its compact size, light weight, fast switching speed and USB, GBIP and Ethernet control interfaces support the standard SCPI command set ensuring smooth integration within all test environments, particularly those associated with automated test. An installation disk that accompanies each unit includes all the drivers required to remotely control the device as well as a user friendly GUI interface (right) compatible with a Windows XP ®, Windows 7® or Windows Vista® operating system. User control is facilitated via pull down menus that allow programming of single or swept modes in frequency or power. Integration of multiple units within a production test environment is easy, and affordable. HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz v01.0710 HMC-T2240 9 Ordering Information Model Number HMC-T2240 Description Synthesized Signal Generator 10 MHz to 40 GHz Price $19,498.00 Test Rack Mount Kit Part Number HMC-RM02 Description Dual Rack Mounting Plate 19” 2u Chassis Price $385.00 Includes 100 - 240V AC Power Supply and one Power Cord at no cost. Please specify your preferred power cord part number at time of ordering. (see “Optional Power Cord” table) SYNTHESIZED SIGNAL GENERATOR Power Cord Part Number HMC-PC01 HMC-PC02 HMC-PC03 HMC-PC04 HMC-PC05 HMC-PC06 HMC-PC07 HMC-PC08 HMC-PC09 HMC-PC10 HMC-PC11 Region Continental Europe United Kingdom China Australia, New Zealand North America South Africa / India Switzerland Denmark Israel Italy Japan All pricing is in U.S. Dollars and is subject to change without notice. 9-6 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at TE@hittite.com