HMC156AC8
v00.1210
GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.7 - 2.4 GHz INPUT
Features
Conversion loss: 15 dB Fo, 3Fo, 4Fo isolation: 38 dB input Drive level: 10 to 20 dBm
Typical Applications
the HMC156AC8 is suitable for: • Wireless local loop • lMDs, VsAt, and point-to-point radios • uNii & HiperlAN
5
Freq. Multipliers - pAssiVe - sMt
• test equipment
Functional Diagram
General Description
the HMC156AC8 is a miniature frequency doubler in a non-hermetic ceramic surface mount package. suppression of undesired fundamental and higher order harmonics is 38 dB typical with respect to input signal levels. the doubler uses the same diode/balun technology used in Hittite MMiC mixers, features small size and requires no DC bias.
Electrical Specifications, TA = +25° C, As a Function of Drive Level
input = +10 dBm parameter Frequency range, input Frequency range, Output Conversion loss FO isolation (with respect to input level) 3FO isolation (with respect to input level) 4FO isolation (with respect to input level) 42 45 28 Min. typ. 1.1 - 2.1 2.2 - 4.2 17 47 55 38 22 43 44 31 Max. Min. input = +15 dBm typ. 0.8 - 2.4 1.6 - 4.8 15 47 55 38 20 27 29 25 Max. Min. input = +20 dBm typ. 0.7 - 2.3 1.4 - 4.6 15 35 40 35 20 Max. units GHz GHz dB dB dB dB
5-1
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC156AC8
v00.1210
GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.7 - 2.4 GHz INPUT
Isolation @ +15 dBm Drive Level*
0
Conversion Gain vs. Drive Level
0
CONVERSION GAIN (dB)
-10
ISOLATION (dB)
-20
-40
-20
-60
-30
Input = 10 dBm Input = 15 dBm Input = 20 dBm
-80
Fo 3Fo 4Fo
5
8 10
-40 1 1.5 2 2.5 3 3.5 4 4.5 5 OUTPUT FREQUENCY (GHz)
-100 0 2 4 6 FREQUENCY (GHz)
*With respect to input level
Input Return Loss vs. Drive Level
0
Output Return Loss @ +15 Drive Level
0
-5 RETURN LOSS (dB) RETURN LOSS (dB)
-4
-10
-8
-15
Input = 10 dBm Input = 15 dBm Input = 20 dBm
-12
-20
-16
-25 0 0.5 1 1.5 2 2.5 3 3.5 4 INPUT FREQUENCY (GHz)
-20 0 1 2 3 4 5 OUTPUT FREQUENCY (GHz)
Absolute Maximum Ratings
input Drive storage temperature Operating temperature +27 dBm -65 to +150 °C -40 to +85 °C
eleCtrOstAtiC seNsitiVe DeViCe OBserVe HANDliNG preCAutiONs
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
5-2
Freq. Multipliers - pAssiVe - sMt
HMC156AC8
v00.1210
GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.7 - 2.4 GHz INPUT
Pin Descriptions
pin Number 1, 3 - 6, 8 Function GND Description All ground leads must be soldered to pCB rF/DC ground. interface schematic
5
Freq. Multipliers - pAssiVe - sMt
2
rFiN
pin is DC coupled and matched to 50 Ohms.
7
rFOut
pin is DC coupled and matched to 50 Ohms.
Outline Drawing
NOtes: 1. pACKAGe BODY MAteriAl: WHite AluMiNA 92% 2. leAD, pACKAGe BOttOM MAteriAl: COpper 3. plAtiNG: eleCtrOlYtiC GOlD 100 - 200 MiCrOiNCHes OVer eleCtrOlYtiC NiCKel 100 tO 200 MiCrOiNCHes. 4. DiMeNsiONs Are iN iNCHes [MilliMeters]. 5. pACKAGe leNGtH AND WiDtH DiMeNsiONs DO NOt iNCluDe liD seAl prOtrusiON .005 per siDe. 6. All GrOuND leADs AND GrOuND pADDle Must Be sOlDereD tO pCB pF GrOuND.
5-3
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC156AC8
v00.1210
GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.7 - 2.4 GHz INPUT
Evaluation PCB
5
Freq. Multipliers - pAssiVe - sMt
5-4
List of Materials for Evaluation PCB 107196 [1]
item J1, J2 u1 pCB [2] Description pCB Mount sMA Connector HMC156AC8, Doubler 107165 eval Board
[1] reference this number when ordering complete evaluation pCB [2] Circuit Board Material: rogers 4350
the circuit board used in the application should be generated with proper rF circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. the evaluation circuit board shown is available from Hittite upon request.
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
很抱歉,暂时无法提供与“HMC156AC8”相匹配的价格&库存,您可以联系我们找货
免费人工找货