HMC158C8

v02.1201 MICROWAVE CORPORATION HMC158C8 Features Conversion Loss: 15 dB Fo, 3Fo, 4Fo Isolation: 40 dB Input Drive Level: 10 to 20 dBm GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.3 - 4.0 GHz INPUT Typical Applications The HMC158C8 is suitable for: • Wireless Local Loop • LMDS, VSAT, and Pt to Pt Radios • UNII & HiperLAN • Test Equipment 11 FREQ. MULTIPLIERS - SMT Functional Diagram General Description The HMC158C8 is a miniature frequency doubler MMIC in a non-hermetic ceramic surface mount non-hermetic package. Suppression of undesired fundamental and higher order harmonics is 40 dB typical with respect to input signal level. The doubler uses the same diode/balun technology used in Hittite MMIC mixers, features small size and requires no DC bias. Electrical Specifications, TA = +25° C, As a Function of Drive Level Input = +10 dBm Parameter Frequency Range, Input Frequency Range, Output Conversion Loss FO Isolation (with respect to input level) 3FO Isolation (with respect to input level) 4FO Isolation (with respect to input level) Min. Typ. 1.7 - 4.0 3.4 - 8.0 18 22 37 Max. Min. Input = +15 dBm Typ. 1.7 - 3.5 3.4 - 7.0 15 45 18 Max. Min. Input = +20 dBm Typ. 1.3 - 4.0 2.6 - 8.0 15 18 Max. Units GHz GHz dB dB 40 50 dB 32 40 dB 11 - 6 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v02.1201 MICROWAVE CORPORATION HMC158C8 GaAs MMIC SMT FREQUENCY DOUBLER, 1.3 - 4.0 GHz INPUT GaAs Gain vs. Drive Level PUMPED MIXER 17 - 25 GHz Conversion MMIC SUB-HARMONICALLY Isolation @ +15 dBm Drive Level* CONVERSION GAIN (dB) 11 Output Return Loss vs. Drive Level Input Return Loss vs. Drive Level For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 11 - 7 FREQ. MULTIPLIERS - SMT *With respect to input level v02.1201 MICROWAVE CORPORATION HMC158C8 GaAs MMIC SMT FREQUENCY DOUBLER, 1.3 - 4.0 GHz INPUT Absolute Maximum Ratings Input Drive Storage Temperature Operating Temperature +27 dBm -65 to +150 °C -40 to +85 °C 11 FREQ. MULTIPLIERS - SMT Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92% 2. LEAD, PACKAGE BOTTOM MATERIAL: COPPER 3. PLATING: ELECTROLYTIC GOLD 100 - 200 MICROINCHES OVER ELECTROLYTIC NICKEL 100 TO 200 MICROINCHES. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. PACKAGE LENGTH AND WIDTH DIMENSIONS DO NOT INCLUDE LID SEAL PROTRUSION .005 PER SIDE. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB PF GROUND. 11 - 8 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v02.1201 MICROWAVE CORPORATION HMC158C8 GaAs MMIC SMT FREQUENCY DOUBLER, 1.3 - 4.0 GHz INPUT Evaluation PCB 11 FREQ. MULTIPLIERS - SMT 11 - 9 List of Materials Item J1, J2 U1 PCB* Description PC Mount SMA Connector HMC158C8, Doubler 107165 Eval Board * Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com