HMC207AS8

HMC207AS8 / 207AS8E v00.1210 GaAs MMIC SMT DoublebAlAnCeD MIxer, 0.7 - 2.0 GHz Features Conversion Loss: 9 dB LO / iF isolation: 45 dB LO / rF isolation: 40 dB input iP3: +17 dBm Typical Applications The HMC207As8 / HMC207As8e is ideal for: • Base stations 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT • Cable Modems • Portable Wireless Functional Diagram General Description The HMC207As8 & HMC207As8e are miniature double-balanced mixers in 8 lead plastic surface mount small Outline iC (sOiC) packages. This passive MMiC mixer is constructed of GaAs schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, biphase modulator (de)modulator, or phase comparator. The consistent MMiC performance will improve system operation and assure regulatory compliance. The high LO suppression of 45 to 50 dB yields excellent carrier suppression for modulator applications. electrical Specifications, TA = +25° C, As a Function of lo Drive Parameter Min. Frequency range, rF & LO Frequency range, iF Conversion Loss Noise Figure (ssB) LO to rF isolation LO to iF isolation rF to iF isolation iP3 (input) 1 dB Gain Compression (input) 32 38 17 14 8 LO = +13 dBm iF = 70 MHz Typ. 0.7 - 2.0 DC - 0.3 9 9 40 45 23 17 11 10.5 10.5 40 40 18 12 7 Max. Min. LO = +10 dBm iF = 70 MHz Typ. 0.8 - 1.2 DC - 0.3 7.5 7.5 45 45 22 15 10 10 10 Max. GHz GHz dB dB dB dB dB dBm dBm Units 10 - 1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC207AS8 / 207AS8E v00.1210 GaAs MMIC SMT DoublebAlAnCeD MIxer, 0.7 - 2.0 GHz Isolation @ lo = +13 dbm 0 -10 RF to IF LO to IF LO to RF Conversion loss vs Temperature @ lo = +13 dbm 0 CONVERSION LOSS (dB) -5 ISOLATION (dB) -20 -30 -40 -50 -60 0.5 -10 10 2 -15 -40 C +25 C +85 C -20 0.5 1 1.5 2 1 1.5 FREQUENCY (GHz) FREQUENCY (GHz) Conversion loss vs. lo Drive 0 +7 dBm +9 dBm +11 dBm +13 dBm +15 dBm return loss @ lo = +13 dbm 0 CONVERSION LOSS (dB) RETURN LOSS (dB) -5 -5 -10 -10 -15 RF IF LO -15 -20 -20 0.5 -25 1 1.5 2 0 0.5 1 FREQUENCY (GHz) 1.5 2 FREQUENCY (GHz) IF bandwidth @ lo = +13 dbm 0 -5 -10 -15 -20 -25 -30 0 0.2 0.4 0.6 0.8 1 IF FREQUENCY (GHz) P1db vs. Temperature @ lo = +13 dbm 15 14 13 12 11 10 9 0.5 CONVERSION LOSS (dB) -40 C +25 C +85 C 0.8 1.1 1.4 1.7 2 FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 Mixers - siNGLe & DOUBLe BALANCeD - sMT P1dB (dBm) HMC207AS8 / 207AS8E v03.0709 GaAs MMIC SMT DoublebAlAnCeD MIxer, 0.7 - 2.0 GHz Input IP3 vs. Temperature @ lo = +13 dbm 35 30 25 IP3 (dBm) 20 15 10 5 0.5 -40 C +25 C +85 C Input IP3 vs. lo Drive 30 25 IP3 (dBm) 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 20 15 10 5 0 -5 0.5 +9 dBm +11 dBm +13 dBm 0.8 1.1 1.4 1.7 2 0.8 1.1 1.4 1.7 2 LO FREQUENCY (GHz) LO FREQUENCY (GHz) Input IP2 vs. lo Drive 70 60 50 IP2 (dBm) 40 30 20 10 0 0.5 Input IP2 vs. Temperature @ lo = +13 dbm 70 60 IP2 (dBm) 50 40 -40 C +25 C +85 C +9 dBm +11 dBm +13 dBm 30 0.8 1.1 1.4 1.7 2 20 0.5 0.8 1.1 1.4 1.7 2 LO FREQUENCY (GHz) LO FREQUENCY (GHz) Mxn Spurious outputs nLO mrF 0 1 2 3 4 0 xx 16 68 89 >105 1 14 0 62 92 >105 2 27 46 67 91 >105 3 22 45 69 65 95 4 44 46 73 86 96 Harmonics of lo LO Freq. (GHz) 0.7 0.9 1.1 1.3 1.5 1.7 nLO spur at rF Port 1 48 64 47 40 39 38 2 38 33 32 34 40 51 3 66 73 54 39 45 42 4 50 63 54 55 57 60 rF = 0.9 GHz @ -10 dBm LO = 0.97 GHz @ +13 dBm All values in dBc relative to the iF LO = +13 dBm Values in dBc below input LO level measured at rF Port. 10 - 3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC207AS8 / 207AS8E v03.0709 GaAs MMIC SMT DoublebAlAnCeD MIxer, 0.7 - 2.0 GHz Absolute Maximum ratings rF / iF input LO Drive storage Temperature Operating Temperature esD sensitivity (HBM) +13 dBm +27 dBm -65 to +150 °C -40 to +85 °C Class 1A eLeCTrOsTATiC seNsiTiVe DeViCe OBserVe HANDLiNG PreCAUTiONs 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 4 outline Drawing NOTes: 1. LeADFrAMe MATeriAL: COPPer ALLOY 2. DiMeNsiONs Are iN iNCHes [MiLLiMeTers]. 3. DiMeNsiON DOes NOT iNCLUDe MOLDFLAsH OF 0.15mm Per siDe. 4. DiMeNsiON DOes NOT iNCLUDe MOLDFLAsH OF 0.25mm Per siDe. 5. ALL GrOUND LeADs MUsT Be sOLDereD TO PCB rF GrOUND. Package Information Part Number HMC207As8 HMC207As8e Package Body Material Low stress injection Molded Plastic roHs-compliant Low stress injection Molded Plastic Lead Finish sn/Pb solder 100% matte sn MsL rating MsL1 MsL1 [1] Package Marking [3] HMC207A xxxx HMC207A xxxx [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number xxxx F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC207AS8 / 207AS8E v03.0709 GaAs MMIC SMT DoublebAlAnCeD MIxer, 0.7 - 2.0 GHz Pin Descriptions Pin Number 1, 3, 6, 8 Function GND Description Package bottom must also be connected to rF/DC ground. interface schematic 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 2 LO This pin is DC coupled and matched to 50 Ohm. 4 N/C No connection required. These pins may be connected to rF/ DC ground without affecting performance. This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary iF frequency range. For operation to DC, this pin must not source or sink more than 10 mA of current or part non-function and possible part failure will result. 5 iF 8 rF This pin is DC coupled and matched to 50 Ohm. 10 - 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC207AS8 / 207AS8E v03.0709 GaAs MMIC SMT DoublebAlAnCeD MIxer, 0.7 - 2.0 GHz evaluation PCb 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 6 list of Materials for evaluation PCb 101785 [1] item J1 - J3 U1 PCB [2] Description PCB Mount sMA rF Connector HMC207As8 / HMC207As8e Mixer 101783 evaluation Board [1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: rogers 4350 The circuit board used in the application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com