HMC213AMS8 / 213AMS8E
v02.1210
GaAs MMIC SMT DoublebAlAnCeD MIxer, 1.5 - 4.5 GHz
Features
Ultra small Package: MsOP8 Conversion Loss: 8.5 dB LO / rF isolation: 40 dB
Typical Applications
The HMC213AMs8(e) is ideal for: • Base stations • PCMCiA Transceivers • Wireless Local Loop
10
Mixers - siNGLe & DOUBLe BALANCeD - sMT
Functional Diagram
General Description
The HMC213AMs8(e) is a ultra miniature doublebalanced mixer in 8 lead plastic surface mount package (MsOP). This passive MMiC mixer is constructed of GaAs schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, biphase (de)modulator, or phase comparator. The consistent MMiC performance will improve system operation and assure regulatory compliance.
electrical Specifications, TA = +25° C, As a Function of lo Drive
Parameter Min. Frequency range, rF & LO Frequency range, iF Conversion Loss Noise Figure (ssB) LO to rF isolation LO to iF isolation iP3 (input) 1 dB Gain Compression (input) 29 27 16 7 LO = +13 dBm iF = 100 MHz Typ. 1.5 - 4.5 DC - 1.5 8.5 8.5 40 35 19 10 10 10 32 26 14 5 Max. Min. LO = +10 dBm iF = 100 MHz Typ. 1.7 - 3.6 DC - 1.5 9 9 40 35 18 8 10.5 10.5 Max. GHz GHz dB dB dB dB dBm dBm Units
10 - 1
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC213AMS8 / 213AMS8E
v02.1210
GaAs MMIC SMT DoublebAlAnCeD MIxer, 1.5 - 4.5 GHz
Isolation @ lo = +13 dbm
0 -10
RF/IF LO/IF LO/RF
Conversion Gain vs. Temperature @ lo = +13 dbm
0
CONVERSION GAIN (dB)
-5 ISOLATION (dB) -20 -30 -40 -50 -60 1 1.5 2 2.5 3 3.5 4 4.5 5 1 1.5 2 2.5 3
-10
10
4 4.5 5
-15
-40 C +25 C +85 C
-20 FREQUENCY (GHz)
3.5
FREQUENCY (GHz)
Conversion Gain vs. lo Drive
0
return loss @ lo = +13 dbm
0
-10
RETURN LOSS (dB)
-5
-5
-10
-15
+9 dBm +11 dBm +15 dBm
-15
RF IF LO
-20 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz)
-20 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz)
IF bandwidth @ lo = +13 dbm
0
P1db vs. Temperature @ lo = +13 dbm
16 15
CONVERSION GAIN (dB)
-5 P1dB (dBm)
14 13 12 11 10 9
-40 C +25 C +85 C
-10
-15
LO=1.8 GHz, RF=1.9 to 4.9 GHz LO=4.4 GHz, RF=1.3 to 4.3 GHz
-20 0 0.5 1 FREQUENCY (GHz) 1.5 2
8 1.5
2
2.5
3
3.5
4
4.5
5
FREQUENCY (GHz)
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
10 - 2
Mixers - siNGLe & DOUBLe BALANCeD - sMT
CONVERSION GAIN (dB)
HMC213AMS8 / 213AMS8E
v02.1210
GaAs MMIC SMT DoublebAlAnCeD MIxer, 1.5 - 4.5 GHz
Input IP3 vs. Temperature @ lo = +13 dbm
25
Input IP3 vs. lo Drive
25
INPUT IP3 (dBm)
20
INPUT IP3 (dBm)
10
Mixers - siNGLe & DOUBLe BALANCeD - sMT
20
15
+11 dBm +15 dBm +13 dBm
15
-40C +85C +25C
10 1.5
2
2.5
3
3.5
4
4.5
5
10 1.5
2
2.5
3
3.5
4
4.5
5
LO FREQUENCY (GHz)
LO FREQUENCY (GHz)
Input IP2 vs. lo Drive
64 60 INPUT IP2 (dBm) 56 52 48 44 40 1.5
+11 dBm +15 dBm +13 dBm
Input IP2 vs. Temperature @ lo = +13 dbm
64 60 INPUT IP2 (dBm) 56 52 48 44 40 1.5
-40C +85C +25C
2
2.5
3
3.5
4
4.5
5
2
2.5
3
3.5
4
4.5
5
LO FREQUENCY (GHz)
LO FREQUENCY (GHz)
10 - 3
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC213AMS8 / 213AMS8E
v02.1210
GaAs MMIC SMT DoublebAlAnCeD MIxer, 1.5 - 4.5 GHz
Harmonics of lo @ rF Port
Mxn Spurious outputs
nLO mrF 0 1 2 3 4 0 xx 13.4 73.8 93.8 >105 1 12.7 0 78.2 89.2 >105 2 20.8 39.8 66.5 92.2 >105 3 19.8 38.9 82.2 82.4 >105 4 76.2 56.2 68.8 89.0 >105
LO Freq. (GHz) 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
nLO spur 1 40 38 41 41 38 35 33 32 2 30 25 28 35 45 47 50 52 3 62 55 34 36 52 55 65 68 4 57 58 61 61 62 62 73 82
10
Mixers - siNGLe & DOUBLe BALANCeD - sMT
10 - 4
rF = 3.5 GHz @ -10 dBm LO = 3.6 GHz @ +13 dBm All values in dBc below iF power level (-1rF + 1LO)
LO = +13 dBm Values in dBc below input LO level measured at rF Port.
Absolute Maximum ratings
rF / iF input LO Drive Continuous Pdiss (T = 85 °C) (derate 10.6 mW/°C above 85 °C) Thermal resistance (Channel to package lead) Junction Temperature storage Temperature Operating Temperature +13 dBm +27 dBm 0.69 W 93.7 °C/W 150 °C -65 to +150 °C -40 to +85 °C
eLeCTrOsTATiC seNsiTiVe DeViCe OBserVe HANDLiNG PreCAUTiONs
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC213AMS8 / 213AMS8E
v02.1210
GaAs MMIC SMT DoublebAlAnCeD MIxer, 1.5 - 4.5 GHz
outline Drawing
10
Mixers - siNGLe & DOUBLe BALANCeD - sMT
NOTes: 1. LeADFrAMe MATeriAL: COPPer ALLOY 2. DiMeNsiONs Are iN iNCHes [MiLLiMeTers]. 3. DiMeNsiON DOes NOT iNCLUDe MOLDFLAsH OF 0.15mm Per siDe. 4. DiMeNsiON DOes NOT iNCLUDe MOLDFLAsH OF 0.25mm Per siDe. 5. ALL GrOUND LeADs MUsT Be sOLDereD TO PCB rF GrOUND.
Package Information
Part Number HMC213AMs8 HMC213AMs8e Package Body Material Low stress injection Molded Plastic roHs-compliant Low stress injection Molded Plastic Lead Finish sn/Pb solder 100% matte sn MsL rating MsL1 MsL1
[1]
Package Marking [3] 213A xxxx 213A xxxx
[2]
[1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number xxxx
10 - 5
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC213AMS8 / 213AMS8E
v02.1210
GaAs MMIC SMT DoublebAlAnCeD MIxer, 1.5 - 4.5 GHz
evaluation PCb
10
Mixers - siNGLe & DOUBLe BALANCeD - sMT
10 - 6
list of Materials for evaluation PCb 103350 [1]
item J1 - J3 U1 PCB [2] Description PCB Mount sMA rF Connector HMC213AMs8(e) Mixer 101650 evaluation Board
[1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: rogers 4350
The circuit board used in the application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
很抱歉,暂时无法提供与“HMC213AMS8”相匹配的价格&库存,您可以联系我们找货
免费人工找货