HMC218MS8

MICROWAVE CORPORATION v01.0300 HMC218MS8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 6 GHz Features Ultra Small Package: 105 1 0 0 61 82 >105 2 15 34 56 81 >105 3 23 27 59 60 >105 4 36 59 68 77 Harmonics of LO LO Freq. (GHz) 5.0 5.2 5.4 5.6 5.8 96 6.0 33 32 64 68 nLO Spur at RF Port 1 31 31 32 32 33 2 30 32 35 35 35 3 57 59 62 64 65 4 68 69 73 76 76 RF = 5.15 GHz @ -10 dBm LO = 5.25 GHz @ +13 dBm All values in dBc relative to the IF LO = +13 dBm Values in dBc below input LO level measured at the RF port. 12 - 62 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0300 MICROWAVE CORPORATION HMC218MS8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 6 GHz Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature +13 dBm +27 dBm -65 to +150 °C -40 to +85 °C 12 MIXERS - SMT NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Outline Drawing For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 63 MICROWAVE CORPORATION v01.0300 HMC218MS8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 6 GHz Evaluation Circuit Board 12 MIXERS - SMT List of Material Item J1 - J3 U1 PCB* Description PC Mount SMA RF Connector HMC218MS8 Mixer 101828 Evaluation Board * Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. 12 - 64 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0300 MICROWAVE CORPORATION HMC218MS8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 6 GHz Notes: 12 MIXERS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 65