HMC219MS8_10

HMC219MS8 / 219MS8E v04.0709 Typical Applications • UNII & HiperLAN The HMC219MS8 / HMC219MS8E is ideal for: 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT • ISM • Microwave Radios Functional Diagram ED U IN NT T O SC DUC DI RO P Features Ultra Small Package: MSOP8 Conversion Loss: 8.5 dB LO / RF Isolation: 25 dB GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz w r Ne o ed f Description d General men om The HMC219MS8 & HMC219MS8E are ultra miniature Rec ot double-balanced mixers in 8 lead plastic surface N mount packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. The consistent MMIC performance will improve system operation and assure regulatory compliance. s sign De Electrical Specifi cations, TA = +25° C, As a Function of LO Drive Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) 17 17 15 7 LO = +13 dBm IF = 100 MHz Typ. 4.5 - 9.0 DC - 2.5 8.5 8.5 25 25 21 10 10 10 20 20 15 5 Max. Min. LO = +11 dBm IF = 100 MHz Typ. 4.5 - 8.6 DC - 2.5 8.5 8.5 25 25 21 8 10 10 Max. GHz GHz dB dB dB dB dBm dBm Units 10 - 1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC219MS8 / 219MS8E v04.0709 Conversion Loss vs Temperature @ LO = +13 dBm 0 -5 -10 -15 -40 C +25 C +85 C -40 -50 -60 RF/IF LO/IF LO/RF -20 4 5 6 7 8 9 10 4 5 6 7 8 9 10 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Loss vs. LO Drive 0 Return Loss @ LO = +13 dBm 0 RETURN LOSS (dB) -5 -5 -10 -10 -15 RF IF LO -15 +9 dBm +11 dBm +13 dBm +15 dBm -20 -20 4 5 6 7 8 9 10 FREQUENCY (GHz) -25 0 1 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) IF Bandwidth @ LO = +13 dBm 0 P1dB vs. Temperature LO = +13 dBm 12.5 12 -40 C +25 C +85 C CONVERSION LOSS (dB) -5 11.5 -10 P1dB (dBm) 11 -15 10.5 10 -20 9.5 -25 0 0.5 1 1.5 2 2.5 3 3.5 4 9 4 5 6 7 8 9 10 IF FREQUENCY (GHz) FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P Isolation @ LO = +13 dBm 0 -10 -20 -30 ISOLATION (dB) GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz CONVERSION LOSS (dB) D New r d fo e end m com e ot R N s sign e 10 CONVERSION LOSS (dB) HMC219MS8 / 219MS8E v04.0709 Input IP3 vs. LO Drive 28 26 INPUT IP3 (dBm) 24 INPUT IP3 (dBm) 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT 22 20 18 4 5 ED U IN NT T O SC DUC DI RO P Input IP3 vs. Temperature @ LO = +13 dBm 24 23 22 21 20 19 18 17 6 7 LO FREQUENCY (GHz) GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz w r Ne o ed f d men om Rec Not +11 dBm +13 dBm +15 dBm s sign De -40 C +25 C +85 C 8 9 10 4 5 6 7 8 9 10 LO FREQUENCY (GHz) Input IP2 vs. Drive 55 50 INPUT IP2 (dBm) 45 40 35 30 25 4 5 6 7 8 9 10 LO FREQUENCY (GHz) Input IP2 vs. Temperature @ LO = +13 dBm 55 50 INPUT IP2 (dBm) +11 dBm +13 dBm +15 dBm -40 C +25 C +85 C 45 40 35 30 4 5 6 7 8 9 10 LO FREQUENCY (GHz) 10 - 3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC219MS8 / 219MS8E v04.0709 MxN Spurious Outputs mRF 0 1 2 3 4 0 1 xx 13.2 79.8 >105 >105 >105 >105 98.1 87.1 8.0 9.0 27 21 32 54 xx xx xx RF = 6 GHz @ -10 dBm LO = 6.1 GHz @ +13 dBm All values in dBc below the IF power level (-1RF + 1LO). 43 LO = +13 dBm Values in dBc below input LO level measured at the RF port. Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature ESD Sensitivity (HBM) +13 dBm +27 dBm -65 to +150 °C -40 to +85 °C Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P Harmonics of LO LO Freq. (GHz) 4.0 1 nLO 2 nLO Spur at RF Port 2 3 3 4 12.2 0 22.3 20.7 33.9 49.5 68.1 83.1 33 31 29 23 21 39 36.9 47.7 36.7 5.0 53.7 55.4 6.0 7.0 35 31 >105 78.1 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz 4 54 47 55 xx D New r d fo e end m com e ot R N 65.5 s sign e 40 53 26 34 10 HMC219MS8 / 219MS8E v04.0709 Outline Drawing 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P w r Ne o ed f d men om Rec Not s sign De NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC219MS8 HMC219MS8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H219 XXXX H219 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 10 - 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC219MS8 / 219MS8E v04.0709 Evaluation Circuit Board List of Materials for Evaluation PCB 103350 [1] Item J1 - J3 U1 PCB [2] Description PCB Mount SMA RF Connector HMC219MS8 / HMC219MS8E Mixer 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 6 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P D New r d fo e end m com e ot R N s sign e GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz 10