HMC220AMS8

HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Features Ultra Small Package: MSOP8 Conversion Loss: 8.5 dB Wideband IF: DC - 4 GHz Typical Applications The HMC220AMS8 / HMC220AMS8E is ideal for: • Microwave Radios • VSAT 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT Functional Diagram General Description The HMC220AMS8 & HMC220AMS8E are ultra miniature double-balanced mixers in 8 lead plastic surface mount packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25° C, As a Function of LO Drive Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) 17 20 14 4 LO = +13 dBm IF = 100 MHz Typ. 5 - 10 DC - 4 7.0 7.0 25 28 17 8 10 10 13 14 16 4 Max. Min. LO = +13 dBm IF = 100 MHz Typ. 10 - 12 DC - 4 8.5 8.5 18 20 21 8 10.5 10.5 17 20 13 5 Max. Min. LO = +10 dBm IF = 100 MHz Typ. 5.9 - 10 DC - 3.5 7.5 7.5 25 28 16 8 10 10 Max. GHz GHz dB dB dB dB dBm dBm Units 10 - 1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Isolation @ LO = +10 dBm 0 -5 RF/IF LO/IF LO/RF Conversion Gain vs Temperature @ LO = +10 dBm 0 CONVERSION GAIN (dB) -5 ISOLATION (dB) -10 -15 -20 -25 -30 -35 -10 10 11 12 13 -15 -40 C +25 C +85 C -20 5 6 7 8 9 10 11 12 13 FREQUENCY (GHz) 5 6 7 8 9 10 FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 +5 dBm +7 dBm +9 dBm +10 dBm +13 dBm Return Loss @ LO = +10 dBm 0 LO RF CONVERSION GAIN (dB) RETURN LOSS (dB) -5 -5 -10 -10 -15 -15 -20 -20 5 6 7 8 9 10 11 12 13 FREQUENCY (GHz) -25 5 6 7 8 9 10 11 12 13 FREQUENCY (GHz) IF Bandwidth vs LO Drive Conversion Gain and Return Loss 0 +13 dBm IF CONVERSION GAIN (dB) RETURN LOSS (dB) P1dB vs. Temperature LO = +10 dBm 16 -5 -10 -15 -20 -25 0 1 Conversion Gain 12 P1dB (dBm) +10 dBm 8 4 +13 dBm +10 dBm IF Return Loss -40 C +25 C +85 C 0 2 3 4 5 6 5 6 7 8 9 10 11 12 13 IF FREQUENCY (GHz) FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 MIXERS - SINGLE & DOUBLE BALANCED - SMT HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Input IP3 vs. Temperature @ LO = +10 dBm 30 Input IP3 vs. LO Drive 30 +7 dBm +10 dBm +13 dBm INPUT IP3 (dBm) 20 INPUT IP3 (dBm) 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT 25 25 -40 C +25 C +85 C 20 15 15 10 5 6 7 8 9 10 11 12 13 LO FREQUENCY (GHz) 10 5 6 7 8 9 10 11 12 13 LO FREQUENCY (GHz) Input IP2 vs. LO Drive 50 Input IP2 vs. Temperature @ LO = +10 dBm 50 45 INPUT IP2 (dBm) 40 35 30 25 20 -40 C +25 C +85 C 40 INPUT IP2 (dBm) 30 20 +7 dBm +10 dBm +13 dBm 10 0 5 6 7 8 9 10 11 12 13 LO FREQUENCY (GHz) 5 6 7 8 9 10 11 12 13 LO FREQUENCY (GHz) 10 - 3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Harmonics of LO MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 11 53 73 > 85 1 3 0 62 69 > 85 2 10 28 53 74 > 85 3 7 31 58 66 > 85 4 54 35 61 73 > 85 LO Freq. (GHz) 5.5 7 8.5 10 11.5 13 nLO Spur at RF Port 1 29 29 26 22 18 13 2 30 27 35 40 49 63 3 42 28 47 44 51 62 4 69 66 70 67 66 xx 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 - 4 RF = 7.5 GHz @ -10 dBm LO = 7.6 GHz @ +10 dBm All values in dBc below the IF power level (-1RF + 1LO) LO = +10 dBm Values in dBc below input LO level measured at the RF port. Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature ESD Sensitivity (HBM) +13 dBm +27 dBm -65 to +150 °C -40 to +85 °C Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Outline Drawing 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC220AMS8 HMC220AMS8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H220A XXXX H220A XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 10 - 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Evaluation Circuit Board 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 - 6 List of Materials for Evaluation PCB 101830 [1] Item J1 - J3 U1 PCB [2] Description PCB Mount SMA RF Connector HMC220AMS8 / HMC220AMS8E Mixer 101828 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com