HMC221_00

HMC221 / 221E v02.0700 GaAs MMIC SOT26 SPDT SWITCH, DC - 3 GHz Typical Applications The HMC221 & HMC221E is ideal for: • ISM Applications • PCMCIA Wireless Cards • Cellular Applications Features RoHS-Compliant Product Low Insertion Loss: 0.4 dB Ultra Small Package: SOT26 Input IP3: +45 dBm Positive Control: 0/+3V @ 10 uA Included in the HMC-DK005 Designer’s Kits Functional Diagram General Description The HMC221 and HMC221E are low-cost SPDT switches in a 6-lead SOT26 plastic package for use in general switching applications which require very low insertion loss and very small size. These devices can control signals from DC to 3 GHz and is especially suited for 900 MHz, 1.8 - 2.2 GHz, and 2.4 GHz ISM applications with less than 1 dB loss. The design provides exceptional insertion loss performance, ideal for filter and receiver switching. RF1 and RF2 are reflective shorts when “Off”. The two control voltages require a minimal amount of DC current and offer compatibility with most CMOS & TTL logic families. See HMC197 for same performance in an alternate SOT26 pin-out.The HMC221E is a RoHScompliant product. 10 SWITCHES - SMT Electrical Specifi cations, TA = +25° C, Vctl = 0/+3 to +8 Vdc Parameter Frequency DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz 0.5 - 1.0 GHz 0.5 - 3.0 GHz 0.5 - 1.0 GHz 0.5 - 3.0 GHz DC - 3.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 3 10 ns ns 24 24 21 14 20 17 16 11 25 23 40 38 Min. Typ. 0.4 0.45 0.6 0.8 28 28 25 18 23 22 20 15 30 29 45 43 Max. 0.7 0.8 0.9 1.1 Units dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm Insertion Loss Isolation Return Loss Input Power for 1 dB Compression (Vctl = 0/+5V) Input Third Order Intercept (Vctl = 0/+5V) (Two-tone Input Power = +7 dBm Each Tone) Switching Characteristics 10 - 42 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC221 / 221E v02.0700 GaAs MMIC SOT26 SPDT SWITCH, DC - 3 GHz Insertion Loss 0 -0.5 INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) Isolation 0 -10 ISOLATION (dB) -20 -30 -40 -50 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) 10 SWITCHES - SMT Return Loss 0 -5 ISOLATION (dB) -10 -15 -20 -25 -30 -35 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) Input 0.1 and 1.0 dB Compression vs. Control Voltage 35 INPUT POWER FOR 0.1 AND 1 dB COMPRESSION (dBm) 1 dB at 1900 MHz 1 dB at 900 MHz 30 Input Third Order Intercept Point vs. Control Voltage 48 INPUT THIRD ORDER INTERCEPT(dBm) 46 44 25 0.1 dB at 900 MHz 20 0.1 dB at 1900 MHz 42 40 900 MHz 1900 MHz 15 3 4 5 6 7 8 9 CONTROL INPUT (Vdc) 38 2 3 4 5 6 7 8 9 CONTROL INPUT (Vdc) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 43 HMC221 / 221E v02.0700 GaAs MMIC SOT26 SPDT SWITCH, DC - 3 GHz Compression vs. Control Voltage Carrier at 900 MHz Control Input (Vdc) +3 +5 +8 Input Power for 0.1 dB Compression (dBm) 17 25 31 Input Power for 1.0 dB Compression (dBm) 20 30 33 Carrier at 1900 MHz Input Power for 0.1 dB Compression (dBm) 17 24 30 Input Power for 1.0 dB Compression (dBm) 20 29 32 Caution: Do not operate in 1dB compression at power levels above +31 dBm (Vctl = +5 Vdc) and do not “hot switch” power levels greater than +20 dBm (Vctl = +5Vdc). 10 SWITCHES - SMT DC blocks are required at ports RFC, RF1 and RF2. Distortion vs. Control Voltage Control Input (Vdc) +3 +5 +8 Third Order Intercept (dBm) +7 dBm Each Tone 900 MHz 41 45 46 1900 MHz 39 43 44 Truth Table *Control Input Voltage Tolerances are ± 0.2 Vdc. Control Input* A (Vdc) 0 +3 0 +5 0 +7 0 +8 B (Vdc) +3 0 +5 0 +7 0 +8 0 Control Current Ia (uA) -10 10 -55 55 -210 210 -280 280 Ib (uA) 10 -10 55 -55 210 -210 280 -280 Signal Path RF to RF1 ON OFF ON OFF ON OFF ON OFF RF to RF2 OFF ON OFF ON OFF ON OFF ON 10 - 44 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC221 / 221E v02.0700 GaAs MMIC SOT26 SPDT SWITCH, DC - 3 GHz Absolute Maximum Ratings Control Voltage Range (A & B) Storage Temperature Operating Temperature ESD Sensitivity (HBM) -0.2 to +12 Vdc -65 to +150 °C -40 to +85 °C Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing 10 SWITCHES - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC221 HMC221E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking H221 221E [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 45 HMC221 / 221E v02.0700 GaAs MMIC SOT26 SPDT SWITCH, DC - 3 GHz Typical Application Circuit 10 SWITCHES - SMT Notes: 1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of 5 to 8 Volts applied to the CMOS logic gates. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. 4. Highest RF signal power capability is achieved with Vdd = +8V and A/B set to 0/+8V. 10 - 46 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC221 / 221E v02.0700 GaAs MMIC SOT26 SPDT SWITCH, DC - 3 GHz Evaluation Circuit Board 10 SWITCHES - SMT List of Materials for Evaluation PCB 101675 [1] Item J1 - J3 J4 - J7 C1 - C3 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 330 pF capacitor, 0402 Pkg. HMC221 / HMC221E SPDT Switch 101659 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 47