HMC260LC3B_09

HMC260LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 14 - 26 GHz Typical Applications The HMC260LC3B is ideal for: • Point-to-Point Radios • Point-to-Mulit-Point Radios & VSAT • Test Equipment & Sensors Features Passive: No DC Bias Required Input IP3: +20 dBm LO/RF Isolation: 40 dB Wide IF Bandwidth: DC - 8 GHz 12 Lead Ceramic 3x3 mm SMT Package: 9mm2 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT • Military End-Use Functional Diagram General Description The HMC260LC3B is a general purpose double balanced mixer in a leadless RoHS compliant SMT package that can be used as an upconverter or downconverter between 14 and 26 GHz. This mixer requires no external components or matching circuitry. The HMC260LC3B provides excellent LO to RF and LO to IF suppression due to optimized balun structures. The mixer operates with LO drive levels above +9 dBm. The HMC260LC3B eliminates the need for wire bonding, allowing use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25° C, IF= 1 GHz, LO= +13 dBm* Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) IP2 (Input) 1 dB Gain Compression (Input) 34 24 15 Min. Typ. 14 - 18 DC - 8 7.5 7.5 40 30 25 18 50 12 10.5 10.5 30 24 25 Max. Min. Typ. 18 - 26 DC - 8 9 9 35 35 30 20 50 14 12 12 Max. Units GHz GHz dB dB dB dB dB dBm dBm dBm *Unless otherwise noted, all measurements performed as downconverter, IF= 1 GHz. 9 - 114 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC260LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 14 - 26 GHz Conversion Gain vs. Temperature 0 CONVERSION GAIN (dB) Isolation 0 -10 -5 ISOLATION (dB) -20 -30 -40 -50 -60 13 15 17 19 21 23 25 27 13 15 17 19 21 RF/IF LO/RF LO/IF -10 -15 +25 C +85 C -40 C 9 23 25 27 FREQUENCY (GHz) -20 FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss 0 RF LO RETURN LOSS (dB) -5 -5 -10 -10 -15 -15 +9 dBm +11 dBm +13 dBm +15 dBm -20 -20 13 15 17 19 21 23 25 27 FREQUENCY (GHz) -25 13 15 17 19 21 23 25 27 FREQUENCY (GHz) IF Bandwidth 0 Upconverter Performance Conversion Gain vs. LO Drive 0 RESPONSE (dB) -5 -5 -10 -10 -15 IF Return Loss Conversion Gain -15 +9 dBm +11 dBm +13 dBm +15 dBm -20 0 2 4 6 8 10 12 FREQUENCY (GHz) -20 13 15 17 19 21 23 25 27 FREQUENCY (GHz) F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 115 MIXERS - SINGLE & DOUBLE BALANCED - SMT CONVERSION GAIN (dB) CONVERSION GAIN (dB) HMC260LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 14 - 26 GHz Input IP3 vs. LO Drive * 25 Input IP3 vs. Temperature * 25 20 IP3 (dBm) 20 15 IP3 (dBm) 15 +25 C +85 C -40 C 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 +9 dBm +11 dBm +13 dBm +15 dBm 10 5 5 0 13 15 17 19 21 23 25 27 LO FREQUENCY (GHz) 0 13 15 17 19 21 23 25 27 LO FREQUENCY (GHz) Input IP2 vs. LO Drive * 80 70 60 IP2 (dBm) Input IP2 vs. Temperature * 80 70 60 IP2 (dBm) 50 40 30 20 10 0 +25 C +85 C -40 C 50 40 30 20 10 0 13 15 17 19 21 23 25 27 LO FREQUENCY (GHz) +9 dBm +11 dBm +13 dBm +15 dBm 13 15 17 19 21 23 25 27 LO FREQUENCY (GHz) Input P1dB vs. Temperature 18 16 14 12 10 8 6 13 15 17 19 21 23 25 27 FREQUENCY (GHz) +25 C +85 C -40 C MxN Spurious Outputs nLO mRF 0 0 xx 18 82 xx xx 1 -2 0 74 90 xx 2 17 38 71 95 93 3 xx 50 65 77 98 4 xx 78 84 90 104 P1dB (dBm) 1 2 3 4 RF = 18 GHz @ -10 dBm LO = 17 GHz @ +13 dBm All values in dBc below the IF output power level. * Two-tone input power = -10 dBm each tone, 1 MHz spacing. 9 - 116 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC260LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 14 - 26 GHz Absolute Maximum Ratings RF / IF Input LO Drive Channel Temperature Continuous Pdiss (Ta = 85 °C) (derate 3.95 mW/°C above 85 °C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +15 dBm +27 dBm 150 °C 260 mW 253 °C/W -65 to +150 °C -40 to +85 °C 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 - 117 Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 8. CLASSIFIED AS MOISTURE SENSITVITY LEVEL (MSL) 1. F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC260LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 14 - 26 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1, 3, 4, 6, 7, 9 GND Package bottom must also be connected to RF/DC ground. 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 2 LO This pin is DC coupled and matched to 50 Ohm. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. 8 RF This pin is DC coupled and matched to 50 Ohm. 10, 11, 12 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 9 - 118 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC260LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 14 - 26 GHz Evaluation PCB 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 - 119 List of Materials for Evaluation PCB 109952 [1] Item J1 - J2 J3 U1 PCB [2] Description SRI SMA Connector Johnson SMA Connector HMC260LC3B Mixer 117611 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25 RF The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com