HMC272MS8_12

HMC272MS8 / 272MS8E v02.0312 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Typical Applications The HMc272Ms8 / HMc272Ms8e is ideal for: Features roHs compliant Product ultra small Package: MsoP8 lo / rF isolation: 32 db input iP3: +20 dbm Mixers - single & Double balanceD - sMT • Up or Down Converter for PCS • W-CDMA • 2.4 GHz ISM • MMDS Functional Diagram General Description The HMc272Ms8 & HMc272Ms8e are general purpose ultra miniature single balanced mixers in 8 lead plastic surface mount Mini small outline Packages (MsoP). This passive MMic mixer is constructed of gaas schottky diodes and a novel planar transformer balun on the chip. The rF port is balanced via the MMIC balun while the LO port is connected directly to the diodes. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25° C, As a Function of IF Frequency Parameter Min. Frequency range, rF & lo Frequency range, iF conversion loss noise Figure (ssb) lo to rF isolation lo to iF isolation iP3 (input) 1 db compression (input) 22 12 17 8 lo = +10 dbm IF = 100 MHz Typ. 2-3 Dc - 0.8 9 9 30 20 21 11 10.5 10.5 24 11 16 7 Max. Min. lo = +10 dbm IF = 400 MHz Typ. 1.7 - 2.8 Dc - 0.8 9 9 32 18 20 10 11 11 Max. GHz GHz db db db db dbm dbm units 1 F or price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC272MS8 / 272MS8E v02.0312 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Conversion Gain vs. Temperature @ LO = +10 dBm 0 -5 Isolation @ LO = +10 dBm 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 RF/IF LO/RF LO/IF -10 -15 -20 -25 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) IF = 400 MHz +25 C +85 C -40 C 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss @ LO = +10 dBm 0 CONVERSION GAIN (dB) -5 RETURN LOSS (dB) -5 -10 -10 -15 -20 +5 dBm +7 dBm +13 dBm +10 dBm +9 dBm -15 RF LO -20 IF = 400 MHz -25 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) -25 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) Conversion Gain vs. IF Frequency 0 IF Bandwidth @ LO = +10 dBm vs. Conversion Gain & Return Loss 0 CONVERSION GAIN (dB) CONVERSION GAIN (dB) RETURN LOSS (dB) -5 -5 -10 -10 -15 100 MHz 400 MHz 800 MHz -15 IF Conversion Gain IF Return Los -20 -20 -25 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) -25 0 0.5 1 1.5 IF FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - single & Double balanceD - sMT 2 CONVERSION GAIN (dB) HMC272MS8 / 272MS8E v02.0312 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Input IP3 vs. LO Drive 25 Input IP3 vs. Temperature @ LO = +10 dBm 25 THIRD ORDER INTERCEPT (dBm) Mixers - single & Double balanceD - sMT 23 INPUT IP3 (dBm) 23 21 21 19 +7 dBm +10 dBm +13 dBm 19 -40 C +25 C +85 C 17 17 15 1 1.5 2 FREQUENCY (GHz) 2.5 3 15 1 1.5 2 FREQUENCY (GHz) 2.5 3 Input IP2 vs. LO Drive SECOND ORDER INTERCEPT (dBm) 70 P1dB vs. Temperature @ LO = +10 dBm 14 60 P1dB (dBm) 12 50 10 40 +7 dBm +10 dBm +13 dBm 30 8 +25 C -55 C +85 C 20 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3 FREQUENCY (GHz) 6 1 1.5 2 FREQUENCY (GHz) 2.5 3 3 F or price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC272MS8 / 272MS8E v02.0312 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz MxN Spurious Outputs nlo mrF 0 1 2 3 4 0 xx 9 64 82 106 1 -8 0 58 89 >110 2 4 38 61 95 >110 3 3 28 44 92 >107 4 27 43 67 87 >110 LO Frequency (GHz) 1.5 1.7 1.9 2.1 2.3 2.5 1 44 40 39 42 43 35 Harmonics of LO nlo spur at rF Port 2 19 16 18 20 23 26 3 42 42 40 35 36 37 4 50 53 53 55 55 56 RF = 2.6 GHz @ -10 dBm LO = 2.2 GHz @ +13 dBm all values in dbc relative to the iF lo = +10 dbm Values in dBc below input LO level measured at the RF port. Absolute Maximum Ratings rF / iF input lo Drive channel Temperature continuous Pdiss (T= 85 °c) (derate 13 mW/°C above 85 °C) Thermal resistance (channel to ground paddle) storage Temperature operating Temperature esD sensitivity (HbM) +13 dbm +27 dbm 150 °c 0.84 W 77 °C/W -65 to +150 °c -40 to +85 °C class 1a elecTrosTaTic sensiTiVe DeVice obserVe HanDling PrecauTions F or price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - single & Double balanceD - sMT 4 HMC272MS8 / 272MS8E v02.0312 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Outline Drawing Mixers - single & Double balanceD - sMT noTes: 1. leaDFraMe MaTerial: coPPer alloY 2. DiMensions are in incHes [MilliMeTers]. 3. DiMension Does noT incluDe MolDFlasH oF 0.15mm Per siDe. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. all grounD leaDs MusT be solDereD To Pcb rF grounD. Package Information Part number HMc272Ms8 HMc272Ms8e Package body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic lead Finish sn/Pb solder 100% matte sn Msl rating Msl1 Msl1 [1] Package Marking [3] H272 xxxx H272 xxxx [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC272MS8 / 272MS8E v02.0312 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Evaluation Circuit Board List of Materials for Evaluation PCB 102781 [1] item J1 - J3 u1 Pcb [2] Description Pcb Mount sMa rF connector HMc272Ms8 / HMc272Ms8e Mixer 102643 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - single & Double balanceD - sMT 6