HMC285_08

HMC285 / 285E v02.0907 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.5 GHz Typical Applications The HMC285 / HMC285E is ideal for: • PCS • W-CDMA • 2.4 GHz ISM Features No External Components Required LO / RF Isolation: 30 dB Input IP3: +21 dBm Ultra Small SOT26 Package 9 MIXERS - SGL-BAL - SMT • MMDS Functional Diagram General Description The HMC285 & HMC285E are ultra miniature single balanced mixers in 6 lead plastic surface mount SOT26 packages. This passive MMIC mixer is constructed of GaAs Schottky diodes and a novel planar transformer balun on the chip. The RF port is balanced via the MMIC balun while the LO port is connected directly to the diodes. The consistent MMIC performance will improve system operation without the need for external components. The SOT26 package is the smallest footprint available for a complete single-balanced mixer, 0.118” x 0.118” (3 x 3 mm). Electrical Specifi cations, TA = +25° C, As a Function of IF Frequency Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Compression (Input) 20 11 17 7 LO = +10 dBm IF = 100 MHz Typ. 2 - 3.5 DC - 0.9 9 9 30 20 21 11 11 11 25 14 16 6 Max. Min. LO = +10 dBm IF = 400 MHz Typ. 1.7 - 2.8 DC - 0.9 9.5 9.5 35 20 20 10 11.5 11.5 Max. GHz GHz dB dB dB dB dBm dBm Units 9 - 134 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC285 / 285E v02.0907 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.5 GHz Conversion Gain vs. Temperature @ LO = +10 dBm 0 -5 -10 -15 -20 -25 -30 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) ISOLATION (dB) Isolation @ LO = +10 dBm 0 -10 -20 -30 IF = 400 MHz -40 -50 -60 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) RF/IF LO/RF LO/RF CONVERSION GAIN (dB) IF = 400 MHz -40 C +25 C +85 C 9 MIXERS - SGL-BAL - SMT 9 - 135 Conversion Gain vs. LO Drive 0 -5 -10 -15 IF = 400 MHz -20 -25 -30 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) +5 dBm +7 dBm +10 dBm +13 dBm Return Loss @ LO = +10 dBm 0 CONVERSION GAIN (dB) -5 RETURN LOSS (dB) -10 -15 IF = 400 MHz -20 LO RF -25 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) Conversion Gain vs. IF Frequency 0 -5 -10 -15 -20 -25 -30 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) IF Bandwidth @ LO = +10 dBm. Conversion Gain & Return Loss CONVERSION GAIN & RETURN LOSS (dB) 0 CONVERSION GAIN (dB) -5 -10 -15 100 MHz 400 MHz 800 MHz -20 IF Conv. Gain IF Return Loss -25 0 0.5 1 1.5 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC285 / 285E v02.0907 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.5 GHz Input IP3 vs. Temperature @ LO = +10 dBm 25 Input IP3 vs. LO Drive 25 23 INPUT IP3 (dBm) INPUT IP3 (dBm) 23 21 21 9 MIXERS - SGL-BAL - SMT 19 +7 dBm +10 dBm +13 dBm 19 17 17 -40 C +25 C +85 C 15 1 1.5 2 FREQUENCY (GHz) 2.5 3 15 1 1.5 2 FREQUENCY (GHz) 2.5 3 Input IP2 vs. LO Drive 70 P1dB vs. Temperature @ LO = +10 dBm 15 60 INPUT P1dB (dBm) INPUT IP2 (dBm) 13 50 11 40 +7 dBm +10 dBm +13 dBm 9 30 7 -40 C +25 C +85 C 20 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3 FREQUENCY (GHz) 5 1 1.5 2 FREQUENCY (GHz) 2.5 3 MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 10 59 >110 >110 1 -12.4 0 60 87 >110 2 1 38 61 90 >110 3 1 23 43 80 >110 4 33 43 62 88 >110 Harmonics of LO nLO Spur at RF Port LO Frequency (GHz) 1.5 1.7 1.9 2.1 2.3 2.5 1 42 39 39 47 36 30 2 17 16 15 16 18 21 3 47 41 37 35 32 32 4 47 44 44 45 48 50 RF = 2.6 GHz @ -10 dBm LO = 2.2 GHz @ +10 dBm All values in dBc relative to the IF LO = +10 dBm Values in dBc below input LO level measured at the RF port 9 - 136 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC285 / 285E v02.0907 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.5 GHz Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature +13 dBm +27 dBm -65 to +150 °C -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 9 MIXERS - SGL-BAL - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Outline Drawing Package Information Part Number HMC285 HMC285E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H285 XXXX 285E XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 137 HMC285 / 285E v02.0907 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.5 GHz Evaluation Board Layout 9 MIXERS - SGL-BAL - SMT List of Materials for Evaluation PCB 103240 [1] Item J1 - J3 U1 PCB [2] Description PC Mount SMA Connector HMC285 / HMC285E Mixer 103065 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board as shown is available from Hittite upon request. 9 - 138 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC285 / 285E v02.0907 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.5 GHz Notes: 9 MIXERS - SGL-BAL - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 139