HMC292LC3B

HMC292LC3B v04.0709 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Typical Applications The HMC292LC3B is ideal for: • Point-to-Point Radios • Point-to-Mulit-Point Radios & VSAT • Test Equipment & Sensors Features Passive: No DC Bias Required Input IP3: +20 dBm LO/RF Isolation: 40 dB Wide IF Bandwidth: DC - 8 GHz Robust 1000V ESD, Class 1C 12 Lead Ceramic 3x3 mm SMT Package: 9mm2 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT • Military End-Use Functional Diagram General Description The HMC292LC3B is a general purpose passive double balanced mixer in a leadless RoHS-Compliant SMT package that can be used as an upconverter or downconverter between 16 and 30 GHz. This mixer requires no external components or matching circuitry. The HMC292LC3B provides excellent LO to RF and LO to IF suppression due to optimized balun structures. The mixer operates with LO drive levels above +9 dBm. The HMC292LC3B eliminates the need for wire bonding, allowing use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25° C, IF= 1 GHz, LO= +13 dBm* Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) IP2 (Input) 1 dB Gain Compression (Input) 8 34 24 14 15 Min. Typ. 16 - 26 DC - 8 8 8 40 32 25 18 48 13 8 11 11 32 28 24 17 Max. Min. Typ. 26 - 30 DC - 8 9.5 9.5 40 34 30 21 50 14 12.5 12.5 Max. Units GHz GHz dB dB dB dB dB dBm dBm dBm *Unless otherwise noted, all measurements performed as downconverter, IF= 1 GHz. 9 - 138 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC292LC3B v04.0709 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Conversion Gain vs. Temperature 0 Isolation 0 -10 LO/RF LO/IF RF/IF CONVERSION GAIN (dB) -5 ISOLATION (dB) -20 -30 -40 -50 -60 15 17 19 21 23 25 27 29 31 15 17 19 21 23 -10 -15 +25 C +85 C -40 C 9 25 27 29 31 FREQUENCY (GHz) -20 FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss 0 -10 RETURN LOSS (dB) -5 -5 LO RF -10 -15 +9 dBm +11 dBm +13 dBm +15 dBm -15 -20 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) -20 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) IF Bandwidth IF CONVERSION GAIN & RETURN LOSS (dB) 0 Upconverter Performance Conversion Gain vs. LO Drive 0 -5 -5 -10 -10 +9 dBm +11 dBm +13 dBm +15 dBm -15 CONVERSION GAIN RETURN LOSS -15 -20 0 2 4 6 8 10 IF FREQUENCY (GHz) -20 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 139 MIXERS - SINGLE & DOUBLE BALANCED - SMT CONVERSION GAIN (dB) CONVERSION GAIN (dB) HMC292LC3B v04.0709 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Input IP3 vs. LO Drive * 25 Input IP3 vs. Temperature * 25 20 IP3 (dBm) IP3 (dBm) +9 dBm +11 dBm +13 dBm +15 dBm 20 15 15 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 10 +25 C +85 C -40 C 5 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) 5 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) Input IP2 vs. LO Drive * 80 70 60 IP2 (dBm) 50 40 30 20 10 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) +9 dBm +11 dBm +13 dBm +15 dBm Input IP2 vs. Temperature * 80 70 60 IP2 (dBm) 50 40 30 20 10 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) +25 C +85 C -40 C Input P1dB vs. Temperature 18 16 14 12 10 8 6 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) +25 C +85 C -40 C MxN Spurious Outputs nLO mRF 0 0 xx 23 87 xx xx 1 13 0 72 89 xx 2 47 50 64 88 86 3 xx 51 72 73 95 4 xx xx 89 92 104 P1dB (dBm) 1 2 3 4 RF = 22 GHz @ -10 dBm LO = 21 GHz @ +13 dBm All values in dBc below the IF output power level. * Two-tone input power = -10 dBm each tone, 1 MHz spacing. 9 - 140 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC292LC3B v04.0709 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Absolute Maximum Ratings RF / IF Input LO Drive Channel Temperature Continuous Pdiss (Ta = 85 °C) (derate 4.0 mW/°C above 85 °C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +13 dBm +27 dBm 150 °C 260 mW 250 °C/W -65 to +150 °C -40 to +85 °C 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 - 141 Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 8. CLASSIFIED AS MOISTURE SESITIVITY LEVEL (MSL) 1. F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC292LC3B v04.0709 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1, 3, 4, 6, 7, 9 GND Package bottom must also be connected to RF/DC ground. 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 2 LO This pin is DC coupled and matched to 50 Ohms. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. 8 RF This pin is DC coupled and matched to 50 Ohm from 16 to 30 GHz. 10, 11, 12 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 9 - 142 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC292LC3B v04.0709 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Evaluation PCB 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 - 143 List of Materials for Evaluation PCB 109952 [1] Item J1 - J2 J3 U1 PCB [2] Description SRI SMA Connector Johnson SMA Connector HMC292LC3B Mixer 117611 Evaluation PCB [1] Reference this number when ordering compete evaluation PCB [2] Circuit Board Material: Arlon 25FR The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com